Abies alba
Investigating the effect of diameter and dowel surface in softwood joints, made by welding and glue [Volume 32, Issue 4, 2017-2018, Pages 598-605]
Abrasion
The effect of corona treatment to improve the mechanical properties of nitrocellulose and polyurethane coatings used in wooden furniture [Volume 34, Issue 3, 2019-2020, Pages 326-336]
ACC
The effects of wood extractive on the fixation and leaching of ACC
preservative in Beech (Fagus orientalis Lipsky) wood [Volume 28, SPRING 1, 2013-2014, Pages 62-71]
Accelerated photo- aging
Investigating the effect of methylation treatment on the kraft lignin optical behavior through simulation of lignin-containing papers [Volume 31, Fall 3, 2016-2017, Pages 410-424]
Acer
Adhesive Modification and Improvement of Properties of Polyvinyl Acetate Using Nano silica [Volume 38, Issue 2, 2023-2024, Pages 128-140]
Acetic anhydride
Effect of Acetylation on Physical and Mechanical Properties of Prticleboard [Volume 22, Issue 1, 2007-2008, Pages 18-28]
Acetylation
Investigation on the effect of acetylation and reduction treatments on the chromophore groups of isolated lignin from unbleached hardwoods chemimecanical pulp using FT-IR spectroscopy [Volume 29, SPRING 1, 2014-2015, Pages 79-93]
Acetylation
The influence of fiber chemical treatment on prevention of biologic
deterioration of medium density fiberboard (MDF) [Volume 29, Fall 3, 2014-2015, Pages 390-398]
Acetylation
Studying the effect of acetylation Beech on interfacial bonding resistance of transparent paint (nitrocellulose lacquer, asid catalyzed lacquer and Half Ppolyester) [Volume 31, SPRING 1, 2016-2017, Pages 105-117]
Acetylation
Investigation on effect of acetylation and antioxidant on weathering resistance of wood/HDPE composite [Volume 27, WINTER 4, 2012-2013, Pages 707-716]
Acetylation
Qualitative Structural Characterization of Two Lignin Samples and Quantitative Determination of Hydroxyl and Methoxyl Functional Groups in Kraft Lignin via Acetylation [Volume 32, Issue 3, 2017-2018, Pages 369-381]
Acetylation
Investigation on the effect of acetylation and the resin type on the biological resistance of aspen tree layered particleboard [Volume 26, Issue 3, 2011-2012, Pages 466-476]
Acetylation
Investigation effect of Weathering on Acetylated Beech Wood by FTIR
Spectroscopy and Electron Microscopic [Volume 25, Issue 1, 2010-2011, Pages 48-61]
Acetylation
The Investigation of Acetylation and Anti-Oxidant Effect on Weathering of wood
Plastic Composites By Means of FTIR and Color Metry (Color measurement) [Volume 25, Issue 1, 2010-2011, Pages 70-79]
Acetylation
Effect of Acetylation on Physical and Mechanical Properties of Prticleboard [Volume 22, Issue 1, 2007-2008, Pages 18-28]
Acetylation
Influences of Acetylation on Water Absorption and Dimensional Stability of Manufactured Paper [Volume 22, Issue 2, 2007-2008, Pages 99-108]
Acid green 20
Modification of Nano-zeolite Clinoptilolite by iron oxide Magnetic Nanoparticles for green acid 20 Dye Removal from Aqueous Solution [Volume 36, Issue 2, 2021-2022, Pages 90-104]
Acid hydrolysis
Preparation and Characterization of Micro (MCC) and Nano crystalline Cellulose (NCC) from Cotton Stem [Volume 30, Summer 2, 2015-2016, Pages 299-307]
Acid hydrolysis
Preparation of Cellulose Nanocrystals from α-Cellulose and Optimization of its Isolation Conditions [Volume 32, Issue 2, 2017-2018, Pages 300-310]
Acid hydrolysis
Control of Inhibitory factors in the Bio-refinery of bagasse pith [Volume 33, Issue 4, 2018-2019, Pages 553-563]
Acidic hydrolysis
Optimum Production of Cellulose NanoCrystal from Cotton Stalk under Acidic Hydrolysis Condition [Volume 30, SPRING 1, 2015-2016, Pages 1-13]
Acid Orange7 Dye
Application of Bagasse as Adsorbent of Acid Orange 7 from Aqueous Solution [Volume 33, Issue 2, 2018-2019, Pages 244-255]
Acid pyrolysis
Treatability of Beech and Pine Wood with Pyrolysis Acid Made from Different species of Wood [Volume 35, Issue 1, 2020-2021, Pages 88-101]
Acid Soluble Lignin
Investigation lignin dissolution at pulping process of wheat straw [Volume 25, Issue 2, 2010-2011, Pages 302-308]
Acoustic
Nondestructive Evaluation of Effects of Moisture Content and Temperature on the Elastic Properties of Beech Wood Using Flexural Vibration Test [Volume 32, Issue 1, 2017-2018, Pages 13-24]
Acoustic coefficient
The possibility of estimating some of the acoustical properties of particleboards using plate mechanical vibration test [Volume 28, SPRING 1, 2013-2014, Pages 89-96]
Acoustic properties
Effect of hydrothermal treatment on the acoustic properties of wood from Walnut and Elm species, utilizable in musical instruments [Volume 29, WINTER 4, 2014-2015, Pages 636-647]
Acoustic properties
Designing and manufacturing of polyester composites reinforced with natural and synthetic fibers as an alternative for the wood in music instruments [Volume 26, Issue 4, 2011-2012, Pages 732-756]
Acoustics
Effect of fermentation pretreatment and extraction on the acoustic properties of Ash wood (Fraxinus excelsior) [Volume 39, Issue 1, 2024-2025, Pages 27-40]
Acoustic tomography
Investigation on biomechanical properties of pinus nigra Using stress wave technique and resistography [Volume 36, Issue 2, 2021-2022, Pages 144-156]
Activated carbon
Evaluation of thermal energy and activated carbon production from bagasse pith [Volume 31, Summer 2, 2016-2017, Pages 181-193]
Activated carbon
Adsorption of rhodamine B with activated carbon prepared from beech wood [Volume 33, Issue 2, 2018-2019, Pages 280-289]
Adhesion
An investigation on paintability of heat treated wood [Volume 30, WINTER 4, 2015-2016, Pages 717-727]
Adhesion
Improvement of adhesion strength of polyurethane and alkyd coatings by nano-silane using sol-gel method [Volume 32, Issue 3, 2017-2018, Pages 322-333]
Adhesion
Adhesion improvement of water-based flexographic inks on polyethylene coated paperboard by silane adhesion promoters [Volume 33, Issue 1, 2018-2019, Pages 76-87]
Adhesion
Study of thermal fatigue on the cracking, adhesion and gloss properties of wood coatings [Volume 36, Issue 2, 2021-2022, Pages 119-131]
Adhesion strength
Improvement of starch adhesive properties used in the carton industry [Volume 28, Summer 2, 2013-2014, Pages 354-363]
Adhesion strength
Studying effect of accelerated aging on adhesion resistance of half polyester and polyurethane transparent coatings applied on maple and pine species [Volume 32, Issue 2, 2017-2018, Pages 205-214]
Adhesion strength
The effect of nano wollastonite on the fire resistance and the adhesion properties of water based acrylic coating in wood surface [Volume 33, Issue 2, 2018-2019, Pages 166-178]
Adhesion strength
An Investigation into the Effect of Moisture Content on Adhesion strength of Half-polyester and Polyurethane Clear Paints Applied to Wood Surface [Volume 33, Issue 4, 2018-2019, Pages 511-521]
Adhesion strength
The Effect of alumina nanoparticles on adhesion strength of clear varnishes applied on walnut and spruce wood [Volume 37, Issue 4, 2022-2023, Pages 271-281]
Adhesion strength of coating
Evaluate the effect of oil-heat treatment of Fir species on contact angle and adhesion strength of water based clear and acid catalyzed transparent coat [Volume 30, SPRING 1, 2015-2016, Pages 173-181]
Adhesion strength of coating
The effect of adding zinc oxide nanoparticles on color change and adhesion strength of polyurethane coating on wood surface [Volume 30, WINTER 4, 2015-2016, Pages 690-704]
Adhesion strength of coating
Investigation on the effect of different methods of applying transparent coatings on adhesion strength of coating in wooden surfaces [Volume 31, Summer 2, 2016-2017, Pages 248-260]
Adhesion strength of coating
Heat treatment of wood in dry medium and investigation on its effect on surface wettability and adhesion strength of coating [Volume 31, Summer 2, 2016-2017, Pages 362-373]
Adhesion test
The effect of corona treatment to improve the mechanical properties of nitrocellulose and polyurethane coatings used in wooden furniture [Volume 34, Issue 3, 2019-2020, Pages 326-336]
Adhesive
Investigation on the feasibility of utilization wood and OCC fiber on the surface
layer of particleboard and their effects on surface hardness and roughness [Volume 25, Issue 1, 2010-2011, Pages 62-69]
Adhesive
A Study of the Effects of height and Thickness of Tenon Made Out of Beech and Hornbeam on bending Strength of Mortise and tenon joint [Volume 25, Issue 1, 2010-2011, Pages 128-137]
Adhesive
Assess the features of puplar plywood using lignin-glyoxal adhessive [Volume 35, Issue 2, 2020-2021, Pages 127-137]
Adhesive
The study of joints in Oak wood beam compared to the location of node and anti-node of longitudinal vibration [Volume 36, Issue 3, 2021-2022, Pages 256-263]
Adhesive Type
The effect ratio of adhesive urea formaldehyde melamine formaldehyde on the properties lightweight particleboard made from expanded polystyrene [Volume 29, WINTER 4, 2014-2015, Pages 626-635]
Adsorption
Application of Bagasse as Adsorbent of Acid Orange 7 from Aqueous Solution [Volume 33, Issue 2, 2018-2019, Pages 244-255]
Adsorption
Adsorption of rhodamine B with activated carbon prepared from beech wood [Volume 33, Issue 2, 2018-2019, Pages 280-289]
Adsorption
Adsorption of Remazol Black B Dye from Aqueous Solution Using Bagasse [Volume 33, Issue 4, 2018-2019, Pages 478-488]
Adsorption
Improved adsorption performance of sawdust by ultrasonic wave: Optimization through response surface methodology, kinetic and thermodynamic studies [Volume 34, Issue 1, 2019-2020, Pages 12-26]
Adsorption
Investigation on adsorption, configuration and performance of chitosan polyelectrolyte in pulp slurry by ellipsometry technique [Volume 34, Issue 4, 2019-2020, Pages 535-546]
Adsorption
Application of Soybean Waste as Adsorbent of Remozol Black B from Aqueous Solution [Volume 37, Issue 4, 2022-2023, Pages 318-329]
Adsorption Isotherm
Application of Bagasse as Adsorbent of Acid Orange 7 from Aqueous Solution [Volume 33, Issue 2, 2018-2019, Pages 244-255]
Adsorption Isotherm
Adsorption of Remazol Black B Dye from Aqueous Solution Using Bagasse [Volume 33, Issue 4, 2018-2019, Pages 478-488]
Adsorption kinetic and thermodynamic
Improved adsorption performance of sawdust by ultrasonic wave: Optimization through response surface methodology, kinetic and thermodynamic studies [Volume 34, Issue 1, 2019-2020, Pages 12-26]
AEER INSIGIN MODULUS OF RUPTURE
THE EFFECT OF SPECIES AND LAYER THICKNESS ON LAMINATED VENEER LUMBER (L. V. L.) MECHANICAL PROPERTIES [Volume 19, No., 2, 2004-2005, Pages 211-224]
AEOLESTHES SARTA SOLSKY
AN INVESTIGATION ON DAMAGE OF AEOLESTHES SARTA SOLSKY ON INDUSTRIAL TIMBER IN IRAN [Volume 17, 17-No. 300, 2002-2003, Pages 73-95]
Aerogel
Production and Characterization of Lignocellulosic Aerogel from Rice Straw [Volume 34, Issue 1, 2019-2020, Pages 124-133]
AFRA
RELATIONSHIP BETWEEN WOOD EXTRACTIVES AND WOOD DECAY [Volume 18, No. 2, 2003-2004, Pages 139-154]
AGRICULTURAL WASTES
THE EFFECTS OF TWO KINDS OF AGRICULTURAL WASTES (WHEAT AND BARELY STRAWS) ON NRC% OF ASPEN PARTICLEBOARDS [Volume 21, No., 2, 2006-2007, Pages 61-69]
Air pollution
The impact of air pollution on cross section anatomical characteristics
Of Pinus eldarica wood [Volume 27, Issue 1, 2012-2013, Pages 129-142]
AKD
Effect of alkyl ketene dimers (AKD) sizing on the properties of pulp and paper made from recycled fibers [Volume 34, Issue 1, 2019-2020, Pages 112-123]
ALDER
Field Test on Resistance of Alder and Horn Beech At Coastal waters of Amirabad port in Caspian Sea [Volume 27, WINTER 4, 2012-2013, Pages 717-730]
ALDER
ACOUSTICAL PROPERTIES OF WOOD IN 2000, 4000 AND 8000 IN HERTZ FERQUENCIES [Volume 14, 14-No. 272, 2001-2002, Pages 27-47]
ALDER
THE EFFECT OF SPECIES AND LAYER THICKNESS ON LAMINATED VENEER LUMBER (L. V. L.) MECHANICAL PROPERTIES [Volume 19, No., 2, 2004-2005, Pages 211-224]
Alder branch
The Investigation of the Utilization Impact of
Alnus subcordata Waste and Poplar Wood in Particle Board Production [Volume 30, SPRING 1, 2015-2016, Pages 37-45]
Alkali charge
Comparative study on pulping variables of cotton linters harvested from four different countries for alpha-cellulose pulp production [Volume 30, WINTER 4, 2015-2016, Pages 618-631]
Alkaline Peroxide Mechanical Pulping
The effects of pre-treatment and consistency on treatment time and brightness of bagasse alkaline peroxide mechanical pulp [Volume 27, Issue 1, 2012-2013, Pages 143-155]
Alkaline Peroxide Mechanical Pulping
Effect of xylanase treatment on properties of alkaline peroxide mechanical
pulp from poplar (Populus nigra) wood [Volume 27, Issue 1, 2012-2013, Pages 156-166]
Alkaline Peroxide Mechanical Pulping
Studying from the Properties of Chemi-Mechanical Pulping and Alkaline Peroxide Mechanical Pulping of Wheat Straw Golestan province [Volume 25, Issue 1, 2010-2011, Pages 32-47]
Alkaline treatment
The effect of Bagasse alkaline treatment on Medium Density Fiberboard properties [Volume 35, Issue 3, 2020-2021, Pages 219-231]
Alkali treatment
Effect of bagasse chemical treatment on the mechanical properties
of composites based on treated bagasse/recycled polyethylene [Volume 28, SPRING 1, 2013-2014, Pages 169-181]
Almond Wood
Effect of Moisture Content and Cutting Speed on Shearing Properties of Four Almond Tree Varieties [Volume 31, Fall 3, 2016-2017, Pages 388-397]
ALNUS GLOTINOSA MAPLE
THE EFFECT OF SPECIES AND LAYER THICKNESS ON LAMINATED VENEER LUMBER (L. V. L.) MECHANICAL PROPERTIES [Volume 19, No., 2, 2004-2005, Pages 211-224]
ALNUS GLUTINOSA
DETERMINATION OF PRACTICAL PROPERTIES OF ALNUS GLUTINOSA GROWN AT SHORT ROTATION PERIOD IN PAPER MAKING [Volume 20, No., 1, 2005-2006, Pages 65-94]
Alnus subcordata and Alnus subglotinosa
Study on the Possibility of Identification and Comparison of Chemical Components in Wood Alnus Subcordata and Alnus Glutinosa GC-MS Methods [Volume 33, Issue 1, 2018-2019, Pages 1-11]
Alphacellulose
Investigation of the quality of cellulosic compounds of some Calotropis procera Willd. ecotypes in southern Iran [Volume 36, Issue 3, 2021-2022, Pages 171-181]
Alpha cellulose
Comparative study on pulping variables of cotton linters harvested from four different countries for alpha-cellulose pulp production [Volume 30, WINTER 4, 2015-2016, Pages 618-631]
Alpha cellulose
Efficiency of Response Surface Methodology to Determine Effective Factors on Production Process of Carboxymethyl cellulose from Populus [Volume 34, Issue 2, 2019-2020, Pages 290-301]
Alpha-cellulose
Optimization of process variables of carboxymethyl cellulose production from alpha-cellulose obtained from cotton Linter using response surface methodology [Volume 33, Issue 4, 2018-2019, Pages 579-592]
Aluminum dioxide
Influence of nano metals oxide treatment on medium density fiberboard properties made of sunflower straw fibers [Volume 30, SPRING 1, 2015-2016, Pages 97-109]
Aluminum three hydrates (ATH)
The effect of using flame retardant mineral fillers on physical and thermal properties of poly lactic acid-rice husk composite [Volume 36, Issue 2, 2021-2022, Pages 105-118]
Amino Silane
Effect of wheat straw surface treatment by using amino silane coupling agent on properties of amino plastic resin-bonded wheat straw particle boards [Volume 26, Issue 1, 2011-2012, Pages 128-137]
Ammodendron persicum
Study of some Apparent, Anatomical and Physical properties of Divdal ҆s (Ammodendron persicum) wood from Zirkooh-Qhaen [Volume 27, WINTER 4, 2012-2013, Pages 664-676]
Analysis variance
Detection and differentiation of the beech tree knot (Fagus orientalis Libsky) by non-destructive stress wave method [Volume 37, Issue 4, 2022-2023, Pages 282-292]
Analytical Hierarchy Process
Applying analytical hierarchy process in ranking of the effective indices on competitiveness of the wooden furniture industry in Iran [Volume 30, WINTER 4, 2015-2016, Pages 578-594]
Analytical Hierarchy Process
Determination of effective indexes on the purchase and selection of paper in Packaging Industry by Analytical Hierarchy Process (AHP) [Volume 33, Issue 4, 2018-2019, Pages 544-552]
Analytic network process
Prioritize of poplar wood processing industries in the Kurdistan province with the aim of poplar wood value chain upgrading [Volume 32, Issue 2, 2017-2018, Pages 181-192]
ANATOMICAL AND CHEMICAL COMPOSITION
WOOD PROPERTIES OF POPULUS DELTOIDES 77.51 GROWN IN GILAN, IRAN [Volume 15, 15-No. 278, 2001-2002, Pages 1-17]
ANATOMICAL CHARACTERISTICS
THE INVESTIGATION ON ANATOMICAL, CHEMICAL AND PHYSICAL CHARACTERISTICS OF SAXAUL WOOD (HALOXYLON PERSICUM) FROM HARESABAD-E-SABZEVAR [Volume 21, No., 2, 2006-2007, Pages 78-94]
Anatomy
Physical and anatomical features and drying behavior of the boards produced from old date palm trees (Phoenix dactylifera L.) in Bam city [Volume 28, Issue 3, 2013-2014, Pages 498-508]
Anatomy
Some anatomical, physical and chemical properties of toothbrush wood
(Salvadora persica L.) in Zabol region [Volume 29, SPRING 1, 2014-2015, Pages 132-141]
Anatomy
COMPARATIVE INVESTIGATION ON THE ANATOMICAL, PHYSICAL AND CHEMICAL CHARACTERISTICS OF ZIZIPHUS SPINA - CHRISTI (L.) WILD FROM TWO REGION IN IRAN [Volume 18, No. 2, 2003-2004, Pages 155-184]
Anatomy
STUDY ON COTTON STEM FOR CELLULOSIC INDUSTRIES [Volume 18, No. 2, 2003-2004, Pages 239-267]
Anionic Charge
The effect of anionic charge reduction of deinked pulp in Physical Strengths Improvement [Volume 32, Issue 1, 2017-2018, Pages 83-93]
Annual growth
INVESTIGATION ON TREND OF FIBER VARIATION OF PINUS ELDARICA [Volume 16, 16-No. 293, 2002-2003, Pages 73-93]
Ansys software
The effect of the type of chair connection on the stress distribution and structural failure by to finite element method [Volume 32, Issue 1, 2017-2018, Pages 106-117]
Anthraquinone
Effect of anthraquinone on NSSC pupling of P.deltoides [Volume 26, Issue 4, 2011-2012, Pages 622-633]
Antibacterial
Investigation of antibacterial properties of melamine coatings containing chitosan and clay nanofibers [Volume 37, Issue 3, 2022-2023, Pages 239-250]
Antibacterial activity
Chemical Modification of the xylan extracted from bagasse pith to prepare antibacterial carboxymethyl xylan/chitosan film [Volume 34, Issue 4, 2019-2020, Pages 448-460]
Antibacterial paper
The use of Thyme extract (Zataria Multiflora) to make antibacterial food packaging paper [Volume 39, Issue 1, 2024-2025, Pages 41-54]
Antibactrial
Comparative study on antimicrobial property of cellulose-silver nanocomposite and cellulose film coved by Ag nanoparticles [Volume 31, Issue 4, 2016-2017, Pages 541-556]
Antioxidant
Evaluation of antioxidant properties and total phenolic and flavonoids content of Eucalyptus camaldulensis and Pinus sylvestris bark [Volume 28, Issue 3, 2013-2014, Pages 522-533]
Antioxidant
Investigation on effect of acetylation and antioxidant on weathering resistance of wood/HDPE composite [Volume 27, WINTER 4, 2012-2013, Pages 707-716]
Anti- Oxidant
The Investigation of Acetylation and Anti-Oxidant Effect on Weathering of wood
Plastic Composites By Means of FTIR and Color Metry (Color measurement) [Volume 25, Issue 1, 2010-2011, Pages 70-79]
Anti-Swelling-Effect (ASE)
Influences of Acetylation on Water Absorption and Dimensional Stability of Manufactured Paper [Volume 22, Issue 2, 2007-2008, Pages 99-108]
APMP
Investigation on high yield chemimechanical pulping of bagasse (CMP-CTMP-APMP) [Volume 10, 10-No. 232, 2000-2001, Pages 1-90]
APMP PROCESS
DETERMINATION OF PRACTICAL PROPERTIES OF ALNUS GLUTINOSA GROWN AT SHORT ROTATION PERIOD IN PAPER MAKING [Volume 20, No., 1, 2005-2006, Pages 65-94]
APMP pulp
The effect of using deinked mixed office waste pulp on the properties of Alkaline
Proxide Mechanical Pulp from cotton stalk [Volume 31, SPRING 1, 2016-2017, Pages 48-57]
APMP pulp
Investigation of the properties of alkline peroxide mechanical pulp(APMP) from Cotton Stalk [Volume 26, Issue 1, 2011-2012, Pages 98-116]
Apparent density
Investigation on the Influence of Paper Making Variables on Apparent Density of Paper Produced From Old Corrugated Container [Volume 22, Issue 1, 2007-2008, Pages 1-17]
Apple pruning
Application of Apple pruning on particleboard manufacturing [Volume 23, Issue 1, 2008-2009, Pages 63-73]
Applicator
Investigation on the effect of different methods of applying transparent coatings on adhesion strength of coating in wooden surfaces [Volume 31, Summer 2, 2016-2017, Pages 248-260]
Apricot pruning
Investigation of physical and mechanical properties of particleboard
made from Apricot pruning and industrial wood particles [Volume 24, Issue 2, 2009-2010, Pages 244-253]
ARIMA
Forecasting of printing and writing paper consumption in Iran using artificial neural network and classical methods [Volume 30, WINTER 4, 2015-2016, Pages 632-652]
ARIMA model
The feasibility of Utilizing Lignocellulosic Wastes for the Bioethanol Production In Iran:Application of ARIMA Time Series Model [Volume 36, Issue 4, 2021-2022, Pages 340-355]
Artificial Neural Networkو particleboard
An Intelligent Neural Networks System for Prediction of particleboard properties [Volume 29, Summer 2, 2014-2015, Pages 242-253]
Ash
Investigation and Comparison of Newsprint Properties from Bleached CMP Pulp of Ash and Orange Woods [Volume 31, Issue 4, 2016-2017, Pages 569-580]
Ash
Comparative Investigation on the Anatomical,Chemical characteristics of E.camaldulensis From region jiroft [Volume 23, Issue 1, 2008-2009, Pages 83-90]
Ash
Comparison of thermal energy production from wood biomass [Volume 34, Issue 3, 2019-2020, Pages 313-325]
Ash wood
Effect of fermentation pretreatment and extraction on the acoustic properties of Ash wood (Fraxinus excelsior) [Volume 39, Issue 1, 2024-2025, Pages 27-40]
Asidified Ethanol
The Effect of Modification with Silan Compound on Physical Properties of Popolus [Volume 31, Fall 3, 2016-2017, Pages 458-471]
Aspect ratio
Identification of Cellulosic Fiberfines Properties in Kraft, Chemical Mechanical, and Recycled Pulps [Volume 33, Issue 2, 2018-2019, Pages 231-243]
Aspect ratio
Effect of fiber length on mechanical properties of wood composite plastic (Polypropylene) [Volume 25, Issue 2, 2010-2011, Pages 187-200]
ASPEN
Investigation Of press Temperature And press Time On Physical And Mechanical Properties Of OSB Board Made of Aspen [Volume 23, Issue 1, 2008-2009, Pages 74-82]
ASPEN
THE EFFECTS OF TWO KINDS OF AGRICULTURAL WASTES (WHEAT AND BARELY STRAWS) ON NRC% OF ASPEN PARTICLEBOARDS [Volume 21, No., 2, 2006-2007, Pages 61-69]
ASPEN
THE EFFECT OF RESIN AMOUNT AND ORIENTATION OF STRAND BOARD ON PHYSICAL AND MECHANICAL PROPERTIES [Volume 21, No., 2, 2006-2007, Pages 70-77]
Aspen Deltoides
Effect of anthraquinone on NSSC pupling of P.deltoides [Volume 26, Issue 4, 2011-2012, Pages 622-633]
Astara
Morphological characteristics and chemical components of two corn varieties
(oilseed and 704) stalks cultivated in Astara [Volume 28, Issue 3, 2013-2014, Pages 561-582]
Astara
Morphological Characteristics and Chemical Composition of Grapevine Branches (Vitis vinifera spp.) Grown in Astara [Volume 30, WINTER 4, 2015-2016, Pages 525-537]
Atomic absorption
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood of Persuan maple and Caucasian maple tree by Atomic Absorption and GC-MS Methods [Volume 34, Issue 3, 2019-2020, Pages 361-371]
Atomic absorption
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood and Bark of Mulberry tree by Atomic Absorption and GC-MS Methods [Volume 35, Issue 3, 2020-2021, Pages 283-293]
Atomic Adsorption
A Study on the Possibility of Extraction, Identification and Removal of Metallic Ions and Resins in Bleached Bagass Pulp by ECF Stages [Volume 30, SPRING 1, 2015-2016, Pages 72-84]
Atomic Adsorption
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood and Bark of Oak by Atomic Adsorption and GC-MS Methods [Volume 32, Issue 2, 2017-2018, Pages 275-286]
ATR-FTIR spectroscopy
Analysis of Photodegraded Lignin and Lignin Model Compounds by ATR-FTIR Spectroscopy [Volume 29, Fall 3, 2014-2015, Pages 343-353]
Auto-Regressive Distributed Lag (ARDL)
The Effect of Exchange Rate on the Imports of Paper Products in Iran [Volume 36, Issue 4, 2021-2022, Pages 356-367]
AVERAGE ANNUAL GROWTH
THE EFFECT OF SIT CONDITION ON SOME MECHANICAL PROPERTIES OF PICEA ABIES WOOD IN TWO REGIONS [Volume 21, No., 1, 2006-2007, Pages 9-21]
AZAD
RELATIONSHIP BETWEEN WOOD EXTRACTIVES AND WOOD DECAY [Volume 18, No. 2, 2003-2004, Pages 139-154]
B
Bacteria
The modifying effect of different Bacillus subtilis strains on permeability of pine (Pinus taeda) in two different culture media [Volume 31, Summer 2, 2016-2017, Pages 309-322]
Bagass
A Study on the Possibility of Extraction, Identification and Removal of Metallic Ions and Resins in Bleached Bagass Pulp by ECF Stages [Volume 30, SPRING 1, 2015-2016, Pages 72-84]
Bagasse
Dielectric properties of oil impregnated kraft and soda pulps [Volume 28, Summer 2, 2013-2014, Pages 329-340]
Bagasse
Identification of compounds derived in pyrolysis oils from Oak,
Poplar wood and Bagasse at 573 oK [Volume 28, Issue 3, 2013-2014, Pages 476-488]
Bagasse
The influence of drying conditions on the chemical characteristics of bagasse recycled pulp [Volume 29, Summer 2, 2014-2015, Pages 190-198]
Bagasse
The effect of old corrugated container (OCC) powder and as urea
formaldehyde adhesive filler on properties of medium density
fiberboard made from bagasse and waste MDF [Volume 29, Fall 3, 2014-2015, Pages 452-463]
Bagasse
Studying on the Soda and Dioxane Lignin of Bagasse using Derivatization Followed by Reductive Cleavage (DFRC) [Volume 29, WINTER 4, 2014-2015, Pages 538-549]
Bagasse
Investigation of the storage time on color properties and chemical compositions of particle board made from bagasse [Volume 31, SPRING 1, 2016-2017, Pages 58-66]
Bagasse
Investigation and Comparison of Bagasse Soda Pulps Properties Bleached with Total Chlorine Free (TCF) and Elemental Chlorine Free (ECF) Stages [Volume 32, Issue 4, 2017-2018, Pages 473-485]
Bagasse
The effects of natural weathering on different properties of paper made in Pars factory [Volume 32, Issue 4, 2017-2018, Pages 509-517]
Bagasse
Application of Bagasse as Adsorbent of Acid Orange 7 from Aqueous Solution [Volume 33, Issue 2, 2018-2019, Pages 244-255]
Bagasse
Comparing the effect of alkali charge and treatment time on the properties of
bagasse and eastern cottonwood cold soda pulp [Volume 27, Issue 1, 2012-2013, Pages 16-26]
Bagasse
Papermaking aspects of five common varieties of sugarcane in Iran [Volume 27, Issue 1, 2012-2013, Pages 114-128]
Bagasse
The effects of pre-treatment and consistency on treatment time and brightness of bagasse alkaline peroxide mechanical pulp [Volume 27, Issue 1, 2012-2013, Pages 143-155]
Bagasse
Evaluating Rate Equations of Delignification Reaction of Bagasse in Soda Pulping [Volume 26, Issue 1, 2011-2012, Pages 72-82]
Bagasse
Investigation on the properties of cement-bagasse fiber composite as a
structural material [Volume 26, Issue 2, 2011-2012, Pages 291-299]
Bagasse
Investigating of the effect of using bagasse and isocyanate adhesive on the 3-layer particleboard manufacturing [Volume 26, Issue 2, 2011-2012, Pages 300-313]
Bagasse
Investigation Produce of Particleboard with use of Bagasse and Haloxylon sp. in [Volume 24, Issue 1, 2009-2010, Pages 99-116]
Bagasse
Investigation on the influence of cooking intensity on strength
properties of bagasse soda pulp [Volume 24, Issue 2, 2009-2010, Pages 275-284]
Bagasse
Effects of xylanase on optical properties of bagasse kraft pulp in
ECF bleaching [Volume 24, Issue 2, 2009-2010, Pages 295-306]
Bagasse
Studies On Mechanical and Morphological Proprties Of
Bagasse - Polypropylene Composite [Volume 23, Issue 2, 2008-2009, Pages 178-190]
Bagasse
Investigation on high yield chemimechanical pulping of bagasse (CMP-CTMP-APMP) [Volume 10, 10-No. 232, 2000-2001, Pages 1-90]
Bagasse
THE UTILIZATION OF BAGASSE AND LOGGING RESIDUES OF EUCALYPTUS FOR PARTICLEBOARD PRODUCTION [Volume 11, 11-No. 243, 2000-2001, Pages 1-60]
Bagasse
The effect of Bagasse characteristics fibers on MDF properties [Volume 16, 16-No. 293, 2002-2003, Pages 29-55]
Bagasse
Adsorption of Remazol Black B Dye from Aqueous Solution Using Bagasse [Volume 33, Issue 4, 2018-2019, Pages 478-488]
Bagasse
INVESTIGATION OF THE PRODUCTION CONDITION ON THE QUALITY OF PARTICLE BOARD MADE OF BAGASSE [Volume 20, No., 2, 2005-2006, Pages 237-254]
Bagasse
Effect of nano gel wollastonite on physical, mechanical and morphological properties of bagasse-cement composites [Volume 34, Issue 3, 2019-2020, Pages 397-408]
Bagasse
Application of bagasse in composites nano-wollastonite-reinforced gypsum base structures [Volume 35, Issue 2, 2020-2021, Pages 138-151]
Bagasse
The effect of Bagasse alkaline treatment on Medium Density Fiberboard properties [Volume 35, Issue 3, 2020-2021, Pages 219-231]
Bagasse
Replacement of elemental chlorine-free (ECF) with the traditional method for bagasse soda pulp bleaching [Volume 35, Issue 3, 2020-2021, Pages 259-270]
Bagasse
In-situ loading of calcium silicate in bleached bagasse fibers and its effect on pulp and paper properties [Volume 35, Issue 3, 2020-2021, Pages 246-258]
Bagasse
Production of plastic wood nanocomposites using agricultural waste and urban polymer waste [Volume 35, Issue 4, 2020-2021, Pages 392-406]
Bagasse
The effect of the bacteria of nano fiber cellulose on the functional properties of cementitious structures [Volume 37, Issue 4, 2022-2023, Pages 293-305]
Bagasse
Investigating the effect of lignin on the negative effects of the torrefaction process in the production of briquettes from bagasse [Volume 37, Issue 4, 2022-2023, Pages 346-360]
Bagasse fiber
Evaluation of the refining effects on the properties of transparent
paper produced from bagasse fiber [Volume 29, Fall 3, 2014-2015, Pages 484-492]
Bagasse fibers
Investigation on Morphological and Mechanical Properties of Coupling Agents on Baggass Polypropylene Composites [Volume 30, SPRING 1, 2015-2016, Pages 85-96]
Bagasse fibers
Effect of nano-silica and bagasee fibers on bending strength and physical
properties of cement fiberboards [Volume 27, Issue 1, 2012-2013, Pages 167-177]
Bagasse fibers
Effect of cemical modification of lignocellulosics fiber on physical and
mechanical properties in MDF [Volume 24, Issue 2, 2009-2010, Pages 167-182]
Bagasse pith
Evaluation of thermal energy and activated carbon production from bagasse pith [Volume 31, Summer 2, 2016-2017, Pages 181-193]
Bagasse pith
Control of Inhibitory factors in the Bio-refinery of bagasse pith [Volume 33, Issue 4, 2018-2019, Pages 553-563]
Bagasse pith
Chemical Modification of the xylan extracted from bagasse pith to prepare antibacterial carboxymethyl xylan/chitosan film [Volume 34, Issue 4, 2019-2020, Pages 448-460]
Bagasse preparation effluent
Investigation on the influence of nutrients and treatment period on enzyme activities of Phanerochaete chrysosporium [Volume 25, Issue 2, 2010-2011, Pages 275-290]
Bagasse Pulping
Study of Organic Bases Potential in Bagasse Pulping [Volume 22, Issue 2, 2007-2008, Pages 73-80]
Bagasse Soda Black Liquor
Biorefinery of Black Liquor from Bagasse Soda Pulping as Surface Coating on Recycled Based Paper [Volume 32, Issue 4, 2017-2018, Pages 498-508]
Ballistic impact
Effect of Cellulosic and Rockwool Fibres on Mechanical strengths and Ballistic Impact of Epoxy-bentonite NanoComposite [Volume 33, Issue 3, 2018-2019, Pages 347-358]
Bamboo
Fiber dimensions and chemical properties of bamboo phyllostachys pubescens [Volume 29, Summer 2, 2014-2015, Pages 335-345]
Bamboo
An Investigation and comparison of newsprint properties from Bamboo and Reed CMP Pulps [Volume 30, Summer 2, 2015-2016, Pages 256-265]
Bank-note
Application of nano silver in the production of antibacterial banknote paper [Volume 31, SPRING 1, 2016-2017, Pages 166-179]
Bark anatomy
The effect of erosion on anatomical characteristics of root and bark of Juniperus excelsa [Volume 27, WINTER 4, 2012-2013, Pages 529-583]
Barley
Investigating morphological and chemical characteristics of tobacco stalk [Volume 26, Issue 2, 2011-2012, Pages 339-351]
Basic density and Shrinkage
Evaluation of Anatomical and Physical Properties of Juvenile/Mature Wood of
Populus alba and Populus × euramericana [Volume 24, Issue 1, 2009-2010, Pages 134-147]
BASSWOOD
RELATIONSHIP BETWEEN MOISTURE CONTENT AND ULTRASONIC WAVE SPEED DURING KILN DRYING OF BASSWOOD LUMBER [Volume 21, No., 1, 2006-2007, Pages 1-8]
Bedroom Furniture
Analysis and investigation the structure of wooden bedroom furniture import market in Iran [Volume 37, Issue 1, 2022-2023, Pages 38-58]
BEECH AND ALDER
DURABILITY OF 6 WOOD SPECIES AGAINST MARINE BORERS IN CHABAHAR PORT COASTS (OMAN SEA) [Volume 18, No. 2, 2003-2004, Pages 205-218]
Beech wood
The influence of beech wood drying condition on its pH, buffering capacity and UF bond strength [Volume 29, Summer 2, 2014-2015, Pages 275-286]
Beech wood
Investigation effect of Weathering on Acetylated Beech Wood by FTIR
Spectroscopy and Electron Microscopic [Volume 25, Issue 1, 2010-2011, Pages 48-61]
Beech wood propionic anhydride
Decay resistance of propionylated Iranian beech wood against white rot
fungus (Trametes versicolor) [Volume 27, Issue 2, 2012-2013, Pages 319-325]
Behavior Creep
Study bhavior creep composites made mixes particle board and medium
density Fiber Board-Recycled from HDPE waste and effect water
fiber board absorption on Composites [Volume 24, Issue 2, 2009-2010, Pages 194-205]
Bending and shear strength
Performance assessment of bending and shear stiffness of hybrid Beech-Poplar cross-laminated timber (CLT) using experimental and finite element methods [Volume 37, Issue 2, 2022-2023, Pages 99-112]
Bending Moment Resistance
Investigation on the effect of wooden dowel diameter, penetration depth and species on the bending moment resistance under diagonal tensile load of corner joints in case-type furniture [Volume 28, SPRING 1, 2013-2014, Pages 11-24]
Bending Moment Resistance
Investigation on bending moment resistance of L- shaped screwed corner joints constructed of Plywood members [Volume 27, WINTER 4, 2012-2013, Pages 731-742]
BENDING PROPERTIES
THE EFFECT OF MAT MOISTURE CONTENT GRADIENT ON PHYSICAL & MECHANICAL PROPERTIES OF PARTICLEBOARD [Volume 20, No., 1, 2005-2006, Pages 95-110]
BENDING PROPERTIES
Effect of density and industrial wood particles to cement ratio on mechanical and physical properties of wood cement composites [Volume 35, Issue 4, 2020-2021, Pages 362-375]
Bending stiffness (MOE)
Gypsum bounded board production reinfoced with Date Palm (Phoenix dactylifera L.) pruning residues fibers [Volume 30, SPRING 1, 2015-2016, Pages 60-71]
Bending strength
withdrawal strength and bending strangth of L -type of nail′s joint in particleboard and MDF joints. [Volume 27, WINTER 4, 2012-2013, Pages 676-689]
Bending strength
Evaluation the physical and mechanical properties of the boards manufactured by mixture of wheat straw and tobacco stalk [Volume 32, Issue 4, 2017-2018, Pages 576-584]
Bending strength
Investigating the bending strength of wooden pin in
H-shaped joints in MDF [Volume 27, Issue 3, 2012-2013, Pages 423-433]
Bending strength
Investigation the possibility of particleboard manufacturing using Hemp stalk [Volume 33, Issue 1, 2018-2019, Pages 63-75]
Bending strength
Effect of nano-silica and bagasee fibers on bending strength and physical
properties of cement fiberboards [Volume 27, Issue 1, 2012-2013, Pages 167-177]
Bending strength
Investigation Of press Temperature And press Time On Physical And Mechanical Properties Of OSB Board Made of Aspen [Volume 23, Issue 1, 2008-2009, Pages 74-82]
Bending strength
THE UTILIZATION OF BAGASSE AND LOGGING RESIDUES OF EUCALYPTUS FOR PARTICLEBOARD PRODUCTION [Volume 11, 11-No. 243, 2000-2001, Pages 1-60]
Bending strength
STUDY ON THE POSSIBILITY OF MANUFACTURING PARTICLEBOARD WITH PAPER SLUDGE AND WOOD CHIPS [Volume 19, No., 2, 2004-2005, Pages 137-158]
Bending strength
A STUDY ON DENSITY PROFILE OF THREE TYPES OF MEDIUM DENSITY FIBERBAORD (MDF) USED IN IRAN MARKET [Volume 20, No., 2, 2005-2006, Pages 285-301]
Bending strength
Effect of the presence of tobacco stalk wastes mixed with industrial wood particle on the dimensional stability and mechanical properties of particleboard [Volume 33, Issue 4, 2018-2019, Pages 564-578]
Bending strength
The use of bagasse in the manufacture of reinforced composite reinforced cement-fiber [Volume 34, Issue 2, 2019-2020, Pages 302-311]
Bending strength
The Potential of utilizing corn cop in particleboard production [Volume 34, Issue 4, 2019-2020, Pages 461-474]
Bending strength
Influence of Hygrothermal Modification on Surface Characteristics and Failure Modes of Poplar Wood [Volume 36, Issue 2, 2021-2022, Pages 132-143]
Bending strength
Study on Mechanical Properties of Kenaf-Cement Composite [Volume 37, Issue 2, 2022-2023, Pages 141-149]
BENDING STRENGTH (MOR)
Gypsum bounded board production reinfoced with Date Palm (Phoenix dactylifera L.) pruning residues fibers [Volume 30, SPRING 1, 2015-2016, Pages 60-71]
BENDING STRENGTH (MOR)
INVESTIGATION ON THE PROPERTIES OF MEDIUM DENSITY FIBERBOARDS FROM MIXTURE OF SAXAUL AND HORNBEAM WOOD [Volume 21, No., 1, 2006-2007, Pages 22-32]
Benomyl
The minimum inhibitory concentration of Benomyl for four fungal species on historical papers [Volume 32, Issue 1, 2017-2018, Pages 131-144]
Benomyl
The effect of Benomyl antifungal on the gall ink used in historical documents [Volume 34, Issue 2, 2019-2020, Pages 276-289]
Bethel method
Study on Fire-Retarding Properties of Nano-Wollastonite
in Fir Wood (Abies alba) [Volume 28, Summer 2, 2013-2014, Pages 252-265]
BHT
Laboratory Study of Synergistic Effects of Mixtures of Organic Biocides, Metal Chelator and Antioxidant Materials against Rainbow White-rot Fungus [Volume 32, Issue 3, 2017-2018, Pages 422-435]
Bio-based adhesives
Mechanical and physical properties of plywood bonded with Bio-based Soy-tannin adhesive [Volume 37, Issue 3, 2022-2023, Pages 251-260]
Biobleaching
Effects of xylanase on optical properties of bagasse kraft pulp in
ECF bleaching [Volume 24, Issue 2, 2009-2010, Pages 295-306]
Biocide
Effects of free and microencapsulated biocides on characteristics of wood coatings and their mold growth resistance [Volume 34, Issue 1, 2019-2020, Pages 39-49]
Biodegradable coating
The effect of chitosan coating on the strength and barrier properties of liner paper [Volume 38, Issue 1, 2023-2024, Pages 37-47]
Biodegradable nanocomposite
Effects of Nano Cellulose and Nano Clay on Properties of Biodegradable Composites Made of Recycled Polymers and Industrial Saw Dust [Volume 34, Issue 3, 2019-2020, Pages 337-348]
Biodegradable polymer
Investigation of mechanical and optical properties of papers coated with Polycaprolactone - Nanocrystalline cellulose - zinc oxide Nanoparticle [Volume 34, Issue 1, 2019-2020, Pages 27-38]
Biodegradable polymer
Preparation and characterization of the cellulose nanocrystal properties from recycled papers and its application as a reinforcement agent in the hydroxypropyl methyl cellulose/cationic starch nanocomposite for use in food packaging industries [Volume 36, Issue 3, 2021-2022, Pages 243-255]
Biodegradable polymer
Production and investigation of cellulose nanocrystals properties obtained from cotton linter and their use as a reinforcing agent in polycaprolactone nanocomposite films [Volume 38, Issue 3, 2023-2024, Pages 225-236]
Biodegradation
Biodegradation and migration behavior of cellulose nanocrystal - nanoclay reinforced PLA composites [Volume 31, SPRING 1, 2016-2017, Pages 130-140]
Biodegradation
Effect of Gamma-Ray on the Physical, Mechanical, Morphological and, Biological durability Properties of WPC Composite [Volume 37, Issue 1, 2022-2023, Pages 86-98]
Bioethanol
The feasibility of Utilizing Lignocellulosic Wastes for the Bioethanol Production In Iran:Application of ARIMA Time Series Model [Volume 36, Issue 4, 2021-2022, Pages 340-355]
Biofuels
Identification of compounds derived in pyrolysis oils from Oak,
Poplar wood and Bagasse at 573 oK [Volume 28, Issue 3, 2013-2014, Pages 476-488]
Biohydrogel
Investigating the effect of butanediol diglycidyl ether on the crosslinking of nanocellulose [Volume 33, Issue 2, 2018-2019, Pages 300-310]
Bio-kratf pulp
Effect of Hornbeam chips fungal pre-treatment on bleachability of its Bio-kraft pulp [Volume 30, Fall 3, 2015-2016, Pages 419-429]
Biological
Comparative investigation on the Biological, Anatomical, Physical and Chemical Characteristics of reeds from Hooralazim and talab Anzali [Volume 2, 2- No 166, 1996, Pages 1-115]
Biometerical fiber
THE COMPARISON OF FIBER BIOMETRY AND CHEMICAL COMPONENTS OF PHRAGMITES AUSTRALIS FOR PAPERMAKING [Volume 14, 14-No. 272, 2001-2002, Pages 73-109]
Bionanocomposite film
Preparation and characterization of the cellulose nanocrystal properties from recycled papers and its application as a reinforcement agent in the hydroxypropyl methyl cellulose/cationic starch nanocomposite for use in food packaging industries [Volume 36, Issue 3, 2021-2022, Pages 243-255]
Biorefinery
Biorefinery of Black Liquor from Bagasse Soda Pulping as Surface Coating on Recycled Based Paper [Volume 32, Issue 4, 2017-2018, Pages 498-508]
Bio-refinery
Control of Inhibitory factors in the Bio-refinery of bagasse pith [Volume 33, Issue 4, 2018-2019, Pages 553-563]
Birch
Optical and physical properties of mixed hardwood CMP pulp and the birch wood [Volume 26, Issue 3, 2011-2012, Pages 523-534]
Bjorkman
Analysis of Photodegraded Lignin and Lignin Model Compounds by ATR-FTIR Spectroscopy [Volume 29, Fall 3, 2014-2015, Pages 343-353]
Black liquor
The use of black liquor and nano-graphene oxide in urea formaldehyde adhesive to improve the mechanical and physical properties of particleboard [Volume 32, Issue 3, 2017-2018, Pages 359-368]
Black liquor
Comparison of the efficiency of two adsorbents activated carbon and beech wood powder copper-modified in removing sulfide ions (S-2) from the black liquor of Kraft pulp and paper [Volume 35, Issue 4, 2020-2021, Pages 376-391]
Black locust
Identification of chemical compounds in hexane extractives of black
locust heartwood by GC/MS method [Volume 27, Issue 3, 2012-2013, Pages 461-470]
Bleachability
Effect of Hornbeam chips fungal pre-treatment on bleachability of its Bio-kraft pulp [Volume 30, Fall 3, 2015-2016, Pages 419-429]
Bleached Pulp
Evaluating the Properties of Bleached Chemi-Mechanical Pulp (CMP) with One and Two-stage of Sodium Hypochlorite and Hydrogen Peroxide [Volume 33, Issue 2, 2018-2019, Pages 205-217]
Bleaching of Deinked Pulp
Optimization Process Variables of Deinked Pulp Bleaching - Improvement of Wet Tensile Strength of Tissue Paper [Volume 30, WINTER 4, 2015-2016, Pages 705-716]
Bleaching Stage
The Effect of ECF Bleaching on Optical and Mechanical Properties of Bagasse Soda Pulp [Volume 31, Summer 2, 2016-2017, Pages 349-361]
Bleaching Stage
Investigation of Optical and Mechanical Properties of Bleached Chemi-mechanical Pulps (CMP) with Oxygen, Hydrogen Peroxide and Sodium Dithionite Stages [Volume 32, Issue 3, 2017-2018, Pages 311-321]
Bleaching Stage
Investigation and Comparison of Bagasse Soda Pulps Properties Bleached with Total Chlorine Free (TCF) and Elemental Chlorine Free (ECF) Stages [Volume 32, Issue 4, 2017-2018, Pages 473-485]
Blue stain
Effect of wetwood and blue stain (Ceratocystis spp.) on the drying rate and fluid transport coefficients of poplar (P. nigra) [Volume 29, WINTER 4, 2014-2015, Pages 572-580]
Bondability
Effect of wheat straw surface treatment by using amino silane coupling agent on properties of amino plastic resin-bonded wheat straw particle boards [Volume 26, Issue 1, 2011-2012, Pages 128-137]
Bond line
Effect of furfurylation on shear strength of bond line and screw withdrawal resistance of beech and fir [Volume 31, Fall 3, 2016-2017, Pages 435-445]
BORDERED PIT
COMPARATIVE INVESTIGATION ON THE ANATOMICAL, PHYSICAL AND CHEMICAL CHARACTERISTICS OF ZIZIPHUS LOTUS (L.) LAM. FROM TWO REGION IN IRAN [Volume 18, No. 1, 2003-2004, Pages 109-133]
BORDERED PIT
STUDY ON COTTON STEM FOR CELLULOSIC INDUSTRIES [Volume 18, No. 2, 2003-2004, Pages 239-267]
Boric acid
The effect of boric acid on the physical and mechanical properties of particleboard made to Urea-formaldehyde resin (UF) [Volume 31, SPRING 1, 2016-2017, Pages 40-47]
Boric acid
Effect of heat treatment and boric acid impregnation on the properties and fire resistance of poplar and radiata pine wood [Volume 38, Issue 1, 2023-2024, Pages 75-86]
BOUCHERIE
PRESERVATIVE TREATMENT OF GREEN POPLAR POLES BY USING TIRE -TUBE METHOD [Volume 19, No., 1, 2004-2005, Pages 97-114]
Box-Behnken design
Optimization of process variables of carboxymethyl cellulose production from alpha-cellulose obtained from cotton Linter using response surface methodology [Volume 33, Issue 4, 2018-2019, Pages 579-592]
BRANCH
COMPARATIVE INVESTIGATION ON FIBER DIMENSIONS OF TRUNK AND BRANCH WOOD OF CARPINUS BETULUS L. [Volume 19, No., 2, 2004-2005, Pages 243-254]
Brand
Explore and identify indicators of customer loyalty to the brand in the furniture industry by AHP [Volume 29, Summer 2, 2014-2015, Pages 310-323]
BREAKING LENGTH
Investigation of newsprint pulp strength of prepared from rape straw using chemo mechanical pulping process [Volume 26, Issue 3, 2011-2012, Pages 429-436]
BREAKING LENGTH
Investigation on possibility of making durable paper with imported Eucalyptus pulp [Volume 24, Issue 1, 2009-2010, Pages 44-57]
BREAKING LENGTH
Replacing imported long fiber pulp with kenaf bast fiber soda pulp to improve quality of paper made from bagasse soda pulp [Volume 23, Issue 2, 2008-2009, Pages 157-168]
BREAKING LENGTH
INVESTIGATION OF PROPERTIES OF ETHANOL-ALKALI, KRAFT AND SODA PULPS PREPARED FROM WHEAT STRAW [Volume 21, No., 2, 2006-2007, Pages 105-114]
Broke Fibers
Effect of Cationic Starch- CMC Self-assembly Layers on Recovered Fibers of Neutral Sulfite Semi-chemical Pulp and Resultant Paper Properties [Volume 33, Issue 1, 2018-2019, Pages 25-37]
Brown-rot fungus
The influence of fiber chemical treatment on prevention of biologic
deterioration of medium density fiberboard (MDF) [Volume 29, Fall 3, 2014-2015, Pages 390-398]
BSTFA
Identification and comparison of oil compounds derived from pyrolysis of sound wood and decayed wood of beech by using Gas Chromatography and Mass Spectrometry (GC/MS) [Volume 30, Summer 2, 2015-2016, Pages 243-255]
BSTFA and GC-MS
Comparative GC/MS analysis of chemical components in wood extracts
of Sweet Locust and False Acacia [Volume 28, Issue 4, 2013-2014, Pages 755-762]
Bulking agents
The effect of using bulking agents on the physical and strength properties of the medium corrugated board made by NSSC and OCC [Volume 37, Issue 3, 2022-2023, Pages 193-203]
BURST
Investigation on the effect of using PAE and CMC dual system on dry
and wet strength properties of tissue papers [Volume 28, Issue 3, 2013-2014, Pages 451-462]
BURST
Investigation the properties of radiata pine (pinus radiata)
wood kraft pulp and paper [Volume 28, Issue 4, 2013-2014, Pages 685-690]
BURST
INVESTIGATION OF PROPERTIES OF ETHANOL-ALKALI, KRAFT AND SODA PULPS PREPARED FROM WHEAT STRAW [Volume 21, No., 2, 2006-2007, Pages 105-114]
BURST INDEX
The effect of using deinked mixed office waste pulp on the properties of Alkaline
Proxide Mechanical Pulp from cotton stalk [Volume 31, SPRING 1, 2016-2017, Pages 48-57]
BURST INDEX
Investigation of lignification and paper making characteristics of populus deltoids col. 77.51 grown under 3 rotation [Volume 16, 16-No. 293, 2002-2003, Pages 1-28]
Burst Strength
Pulp and paper making features of Sequoia sempervirens wood [Volume 26, Issue 1, 2011-2012, Pages 83-97]
Burst Strength
Investigation of newsprint pulp strength of prepared from rape straw using chemo mechanical pulping process [Volume 26, Issue 3, 2011-2012, Pages 429-436]
Burst Strength
Pulping and paper making properties of Populus costanzo [Volume 25, Issue 2, 2010-2011, Pages 157-169]
Burst Strength
Effect of Refining Intensity on Pulp and Paper Properties Made of Eucalyptus Camaldulensis Wood [Volume 24, Issue 1, 2009-2010, Pages 124-133]
Burst Strength
Modification of deinked pulp (DIP) by CMC Grafting [Volume 34, Issue 4, 2019-2020, Pages 475-487]
Buyer Satisfaction
Evaluation of the effective indexes on industrial buyer satisfaction in the supply chain of the home wooden furniture industry in Tehran province [Volume 30, Fall 3, 2015-2016, Pages 475-490]
C
Cabinet-Making Industry
Study on the tensile and compression tension-carrying capacity of corner V-nails [Volume 31, Issue 4, 2016-2017, Pages 621-633]
Calcium carbonate
Study of using water softening process byproduct, calcium carbonate on fine paper production [Volume 30, SPRING 1, 2015-2016, Pages 14-25]
Calcium carbonate
Potential of Agricultural Residues Fibers and mineral material in Wood Plastics Composites Production [Volume 30, Summer 2, 2015-2016, Pages 220-229]
Calcium carbonate
The effect of water softening calcium carbonate on the fluting paper properties from OCC and NSSC [Volume 32, Issue 1, 2017-2018, Pages 118-130]
Calcium carbonate
Effect of using PCC fillers and nanocellulose on pulp and paper properties [Volume 33, Issue 1, 2018-2019, Pages 12-24]
Calcium carbonate
Effect of coating type and grammage of printing paper on water drop contact angle over time [Volume 35, Issue 2, 2020-2021, Pages 165-177]
Calcium silicate crystals
Calcium silicate formation using of Nano-silica and wood flour calcareous-treated and investigating of properties of the wood plastic composite obtained from it [Volume 31, Fall 3, 2016-2017, Pages 486-499]
Calligonum comosum shrub
Stem and root comparative wood anatomy of (Calligonum comosum)
In the deserts of Iran and short sight to technical properties of fabricated of particleboard from its wood [Volume 30, WINTER 4, 2015-2016, Pages 538-551]
Calotropis procera
Investigation of the quality of cellulosic compounds of some Calotropis procera Willd. ecotypes in southern Iran [Volume 36, Issue 3, 2021-2022, Pages 171-181]
Canola
Investigation on the influence of the density reduction of the particleboard by
canola residues on the properties of particleboard [Volume 28, Issue 3, 2013-2014, Pages 463-475]
Canola
Investigation of mechanical properties particleboard based on canola stalks and poplar wood by Response Surface Method (RSM) [Volume 30, Summer 2, 2015-2016, Pages 230-242]
Canola oil
An investigation on paintability of heat treated wood [Volume 30, WINTER 4, 2015-2016, Pages 717-727]
Canola residues
Investigation on Neutral Sulfite Semi-Chemical Pulping of Reapseed (Canola) Residues [Volume 25, Issue 1, 2010-2011, Pages 113-127]
Canola stalks
Preparation of Bleached Soda Pulp from Canola Stalks [Volume 25, Issue 1, 2010-2011, Pages 80-90]
Canola Stem
Physical and mechanical properties of wood-plastic composite made of
Canola stem residues and polypropylene [Volume 28, Issue 4, 2013-2014, Pages 628-641]
Canola stem flour
Assessment of the Biodegradability of Poly-Lactic Acid - Canola stem flour Composites against Natural Biological Factors [Volume 34, Issue 1, 2019-2020, Pages 50-61]
Capability
The effect of marketing capabilities, innovation and learning ability of employees on the performance of wooden office furniture companies [(Articles in Press)]
Carbon fiber
Designing and manufacturing of polyester composites reinforced with natural and synthetic fibers as an alternative for the wood in music instruments [Volume 26, Issue 4, 2011-2012, Pages 732-756]
Carbon nanofiber
Study of the effect of carbon nanofiber reinforced epoxy adhesive on the flexural moment capacity of corner joints in furniture [Volume 36, Issue 4, 2021-2022, Pages 305-316]
Carboxymethyl cellulose
Optimization of process variables of carboxymethyl cellulose production from alpha-cellulose obtained from cotton Linter using response surface methodology [Volume 33, Issue 4, 2018-2019, Pages 579-592]
Carboxymethyl cellulose
Efficiency of Response Surface Methodology to Determine Effective Factors on Production Process of Carboxymethyl cellulose from Populus [Volume 34, Issue 2, 2019-2020, Pages 290-301]
Carboxymethyl cellulose
Modification of deinked pulp (DIP) by CMC Grafting [Volume 34, Issue 4, 2019-2020, Pages 475-487]
Carboxymethyl cellulose
Use of magnetic nano bio composites prepared from fibers, nanocrystalline cellulose and carboxy methylcellulose in adsorption of heavy metals )Nickel and Lead( [Volume 35, Issue 4, 2020-2021, Pages 332-347]
Carnauba wax
Fabrication of Durable, Super-hydrophobic and Self-cleaning Wood Surfaces Based on Silica-Carnauba Wax, Nano-hybrid coating into Epoxy resin matrix [Volume 38, Issue 4, 2023-2024, Pages 281-295]
Carpinus betulus
Investigation and compare the tensile strength of hardwood dowel joints, made by glue and welding [Volume 32, Issue 3, 2017-2018, Pages 382-391]
Carpinus betulus
Comparative study on Pulping characteristics of Carpinus betulus and Parotia oersica woods [Volume 9, 9-No. 225, 2000, Pages 1-33]
Carpinus betulus L
Engineering properties of Hornbeam wood in Veisar region [Volume 9, 9-No. 225, 2000, Pages 109-149]
Carting Industry
Determination of effective indexes on the purchase and selection of paper in Packaging Industry by Analytical Hierarchy Process (AHP) [Volume 33, Issue 4, 2018-2019, Pages 544-552]
Carton powder
The effect of old corrugated container (OCC) powder and as urea
formaldehyde adhesive filler on properties of medium density
fiberboard made from bagasse and waste MDF [Volume 29, Fall 3, 2014-2015, Pages 452-463]
Cationic poly acrylamide
Effect of Using Dual Composition of Cationic Starch-Nano Silica and Nano Cellulose-Poly Acrylamide On Physical and Strength Properties of Cotton Papers [Volume 33, Issue 3, 2018-2019, Pages 428-437]
Cationic polymers
The effect of anionic charge reduction of deinked pulp in Physical Strengths Improvement [Volume 32, Issue 1, 2017-2018, Pages 83-93]
Cationic Pulp Fiber
The performance of cationized pulp fiber as paper making
wet-end additive [Volume 29, Fall 3, 2014-2015, Pages 354-367]
Cationic starch (CS)
Comparison of the Effect of Using Cellulose Nanofibers and Cationic Starch instead of Refining on the Physical and Mechanical Properties of Manufacture Paper from OCC pulp [Volume 33, Issue 4, 2018-2019, Pages 593-605]
Cationic starch. Nano silica
Effect of Using Dual Composition of Cationic Starch-Nano Silica and Nano Cellulose-Poly Acrylamide On Physical and Strength Properties of Cotton Papers [Volume 33, Issue 3, 2018-2019, Pages 428-437]
Cationization
Effect of CMP fiber grafting on strength properties of its paper [Volume 28, SPRING 1, 2013-2014, Pages 24-34]
Caucasian Elm
Effect of hydrothermal treatment on the acoustic properties of wood from Walnut and Elm species, utilizable in musical instruments [Volume 29, WINTER 4, 2014-2015, Pages 636-647]
Caucasian maple tree
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood of Persuan maple and Caucasian maple tree by Atomic Absorption and GC-MS Methods [Volume 34, Issue 3, 2019-2020, Pages 361-371]
CELCURE
An Investigation on the possibility of utilizing domestic wood in cooling towers [Volume 25, Issue 2, 2010-2011, Pages 170-186]
CELCURE
RESISTANCE OF BEECH, OAK AND HORNBEAM WOOD SPECIES AGAINST MARINE BORERS IN BOSHEHR PORT COASTS IN PERSIAN GULF [Volume 18, No. 1, 2003-2004, Pages 63-76]
CELCURE
PRESERVATIVE TREATMENT OF GREEN POPLAR POLES BY USING TIRE -TUBE METHOD [Volume 19, No., 1, 2004-2005, Pages 97-114]
CELCURE
RESISTANCE OF SOME IRANIAN HARDWOODS AGAINST MARINE BORERS IN BOSHEHR PORT COAST (PERSIAN GULF) [Volume 19, No., 1, 2004-2005, Pages 115-131]
CELCURE
RESISTANCE OF SOME IRANIAN HARDWOODS AGAINST MARINE BORERS IN MAHSHAHR (PERSIAN GULF), BANDAR TORKMAN AND NOSHAHR (CASPIAN SEA) COASTS [Volume 19, No., 2, 2004-2005, Pages 193-210]
CELCURE AND CREOSOTE
Study on Termites Resistance of Oak Wood by Field test stakes [Volume 22, Issue 1, 2007-2008, Pages 62-72]
CELCURE AND CREOSOTE
INVETIGATION ON DURABILITY OF EUCALYPTUS WOOD (E. INTERTEXTA R. T.BAKER) BY FIELD TEST STAKES [Volume 21, No., 1, 2006-2007, Pages 52-60]
CELCURE AND DURABILITY
THE EFFECT OF MARINE BORERS ATTACK ON SEVEN IRANIAN WOOD SPECIES IN BANDAR ABBAS COASTS [Volume 17, 17-No. 300, 2002-2003, Pages 57-72]
Cellulase Enzyme
Investigating the effect of pH on cellulase enzyme efficiency on the OCC pulp properties [Volume 33, Issue 3, 2018-2019, Pages 381-390]
Cellulase Enzyme
Enzymatic Versus Chemical Deinking of Old Newspaper [Volume 25, Issue 2, 2010-2011, Pages 223-233]
CELLULOSE
Preparation of cellulose-nylon composite in liquid phase using macro-waves [Volume 28, Issue 4, 2013-2014, Pages 732-741]
CELLULOSE
Preparation of Cellulose Nanocrystals from α-Cellulose and Optimization of its Isolation Conditions [Volume 32, Issue 2, 2017-2018, Pages 300-310]
CELLULOSE
Effect of Using Dual Composition of Cationic Starch-Nano Silica and Nano Cellulose-Poly Acrylamide On Physical and Strength Properties of Cotton Papers [Volume 33, Issue 3, 2018-2019, Pages 428-437]
CELLULOSE
Comparative Investigation on the Anatomical,Chemical characteristics of E.camaldulensis From region jiroft [Volume 23, Issue 1, 2008-2009, Pages 83-90]
CELLULOSE
PROPERTIES OF EUCALYPTUS STERIATICALYX WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 11, 11-No. 243, 2000-2001, Pages 61-123]
CELLULOSE
PROPERTIES OF EUCALYPTUS INTERTEXTA WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 12, 12-No. 251, 2000-2001, Pages 73-139]
CELLULOSE
PROPERTIES OF EUCALYPTUS MICROTHECA WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 13, 13-No. 255, 2001, Pages 43-106]
CELLULOSE
INVESTIGATION ON DELIGNIFICATION AND PULPING OF SPRUCE (PICEA ABIES) [Volume 18, No. 2, 2003-2004, Pages 219-238]
CELLULOSE
INVESTIGATION OF PULP PAPER CHARACTERISTIC OF THREE POPLAR COLONS, P.NIGRA, 69/55, 144/9 DELTOIDS, ORAMERICAN 214 [Volume 20, No., 2, 2005-2006, Pages 151-168]
CELLULOSE
INVESTIGATION ON TENSILE STRENGTH OF DOWEL JOINT IN PARTICLEBOARD FASTENING [Volume 20, No., 2, 2005-2006, Pages 169-184]
CELLULOSE
Effects of using Cellulose Nanocrystal as wood cement
Composite admixture on strength of physical and
Mechanical poroperties of wood cement board [Volume 35, Issue 3, 2020-2021, Pages 271-282]
Cellulose Nanocrystal
Optimum Production of Cellulose NanoCrystal from Cotton Stalk under Acidic Hydrolysis Condition [Volume 30, SPRING 1, 2015-2016, Pages 1-13]
Cellulose Nanocrystal
Preparation of Cellulose Nanocrystals from α-Cellulose and Optimization of its Isolation Conditions [Volume 32, Issue 2, 2017-2018, Pages 300-310]
Cellulose Nanocrystal
Preparation and Characterization of Electrospun Nanofiber of Poly (Vinyl Alcohol) and Cellulose Nanocrystals [Volume 33, Issue 3, 2018-2019, Pages 438-452]
Cellulose Nanocrystal
Effects of using Cellulose Nanocrystal as wood cement
Composite admixture on strength of physical and
Mechanical poroperties of wood cement board [Volume 35, Issue 3, 2020-2021, Pages 271-282]
Cellulose nanocrystals
Production and investigation of cellulose nanocrystals properties obtained from cotton linter and their use as a reinforcing agent in polycaprolactone nanocomposite films [Volume 38, Issue 3, 2023-2024, Pages 225-236]
Cellulose nanocrystals
Effect of the CNFs and CNCs based-flame retardants on the fire retardancy of the hand-made coated paperboard [Volume 38, Issue 4, 2023-2024, Pages 330-340]
Cellulose Nano fiber
Effects of Nano Cellulose and Nano Clay on Properties of Biodegradable Composites Made of Recycled Polymers and Industrial Saw Dust [Volume 34, Issue 3, 2019-2020, Pages 337-348]
Cellulose Nano fiber
Evaluation of physical and mechanical properties of Nanocomposites made of polyvinyl alcohol - Nanofiber cellulose and Nano silicon dioxide [Volume 36, Issue 1, 2021-2022, Pages 78-89]
Cellulose nanofiber (CNF)
Comparison of the Effect of Using Cellulose Nanofibers and Cationic Starch instead of Refining on the Physical and Mechanical Properties of Manufacture Paper from OCC pulp [Volume 33, Issue 4, 2018-2019, Pages 593-605]
Cellulose nanofibers
Biodegradation and ecotoxicological impact of cellulose nanocomposites under Controlled Composting Conditions [Volume 33, Issue 1, 2018-2019, Pages 122-132]
Cellulose nanofibers
Effect of coating type and grammage of printing paper on water drop contact angle over time [Volume 35, Issue 2, 2020-2021, Pages 165-177]
Cellulose nanofibers
Investigation of replacement of imported long fiber pulp with cellulose nanofibers and cationic materials in the production of durable paper [Volume 36, Issue 2, 2021-2022, Pages 157-169]
Cellulose nanofibers
The effect of dry- heat aging on properties of handmade papers reinforced with cellulose nanofibers treatment [Volume 36, Issue 4, 2021-2022, Pages 317-328]
Cellulose nanofibers
The effect of cellulose nanofibers treatment on the discoloration of historical papers [Volume 37, Issue 1, 2022-2023, Pages 73-85]
Cellulose nanofibers
Effect of the CNFs and CNCs based-flame retardants on the fire retardancy of the hand-made coated paperboard [Volume 38, Issue 4, 2023-2024, Pages 330-340]
Cellulose nanofibers aerogels
Chemical modification of cellulose nanofibers with phthalimide air filter to adsorb carbon dioxide [Volume 33, Issue 4, 2018-2019, Pages 531-543]
Cellulosic fibers
Effect of Cellulosic and Rockwool Fibres on Mechanical strengths and Ballistic Impact of Epoxy-bentonite NanoComposite [Volume 33, Issue 3, 2018-2019, Pages 347-358]
Cellulosic Industry
Effective indicators for the stability of a stable supply chain model in the cellulosic industry by Vickor method. [Volume 39, Issue 1, 2024-2025, Pages 12-26]
CELL WALL DIAMETER
COMPARATIVE INVESTIGATION ON FIBER DIMENSIONS OF TRUNK AND BRANCH WOOD OF CARPINUS BETULUS L. [Volume 19, No., 2, 2004-2005, Pages 243-254]
CELL WALL THICKNESS
Investigation of the antomical, biometry and chemical characteristics
of juvenile and mature poplar (Populus alba) wood [Volume 28, SPRING 1, 2013-2014, Pages 182-193]
CELL WALL THICKNESS
INVESTIGATION ON TRACHIEDS CHARACTERISTICS OF PINUS TEADA [Volume 19, No., 1, 2004-2005, Pages 25-48]
Cell Wall WPC
Modification of Paulownia Wood with methylolated dimethyloldihydroxyethylenurea (mDMDHEU) and the investigation of its effect on Some of Strength Properties [Volume 32, Issue 3, 2017-2018, Pages 436-449]
Celtis australis
Comparative wood anatomy of Wych Elm, English Elm,
Caucasian Elm and Hackberry [Volume 26, Issue 3, 2011-2012, Pages 564-578]
Celtis australis
Morphological and chemical components of Ulmus glabrar, Ulmus compestris, Zelkova carpinifolia, Celtis australis [Volume 25, Issue 2, 2010-2011, Pages 248-259]
Cement
Effect of nano- wollastonite on microscopic, mechanical and physical properties of cement- wood fibers composite. [Volume 30, WINTER 4, 2015-2016, Pages 567-577]
Cement
Investigation on effect of nano gel wollastonite on properties usage of wood-cement composites manufactured from rice straw fibers [Volume 33, Issue 3, 2018-2019, Pages 453-465]
Cement-based products
Study on Mechanical Properties of Kenaf-Cement Composite [Volume 37, Issue 2, 2022-2023, Pages 141-149]
Cement composites
Increasing the flexural strength capacity of cement composite
with natural fibres [Volume 24, Issue 2, 2009-2010, Pages 206-218]
Cement fiberboards
Effect of nano-silica and bagasee fibers on bending strength and physical
properties of cement fiberboards [Volume 27, Issue 1, 2012-2013, Pages 167-177]
Central composite design
Use of Central Composite Design for Optimization of ultrasonic pre-treatment parameters on chemical deinking of old newspaper [Volume 33, Issue 4, 2018-2019, Pages 489-500]
Central composite design
Improved adsorption performance of sawdust by ultrasonic wave: Optimization through response surface methodology, kinetic and thermodynamic studies [Volume 34, Issue 1, 2019-2020, Pages 12-26]
Central composite design
Efficiency of Response Surface Methodology to Determine Effective Factors on Production Process of Carboxymethyl cellulose from Populus [Volume 34, Issue 2, 2019-2020, Pages 290-301]
CERAMBYCIDAE
AN INTRODUCING TO IMPORTANT XYLOPHAGOUS PESTS (LONG HORN BEETLES) OF IRAN [Volume 20, No., 2, 2005-2006, Pages 207-236]
Cerasus mahaleb (L.) Mill
Investigation of selected physical, biometrical and mechanical properties of
Cerasus mahaleb (L.) mill in the middle Zagros forest site [Volume 27, Issue 2, 2012-2013, Pages 267-274]
Chelating
Investigation on TCF Bleaching of Tobacco stalk ( Nicotiana tabacum L.'Coker 347') Soda Pulp [Volume 29, WINTER 4, 2014-2015, Pages 623-632]
CHEMICAL
Some anatomical, physical and chemical properties of toothbrush wood
(Salvadora persica L.) in Zabol region [Volume 29, SPRING 1, 2014-2015, Pages 132-141]
CHEMICAL
COMPARATIVE INVESTIGATION ON THE ANATOMICAL, PHYSICAL AND CHEMICAL CHARACTERISTICS OF ZIZIPHUS SPINA - CHRISTI (L.) WILD FROM TWO REGION IN IRAN [Volume 18, No. 2, 2003-2004, Pages 155-184]
Chemical Additives
The effect of some additives to improve water absorption and strengths of paper prepared from old corrugated container [Volume 38, Issue 4, 2023-2024, Pages 251-265]
CHEMICAL CHARACTERISTICS
Fiber dimensions and chemical properties of bamboo phyllostachys pubescens [Volume 29, Summer 2, 2014-2015, Pages 335-345]
CHEMICAL CHARACTERISTICS
Anatomical, morphological and chemical properties of Tobacco stalk
(Nicotiana tabacum L.) [Volume 27, Issue 3, 2012-2013, Pages 495-509]
CHEMICAL CHARACTERISTICS
THE INVESTIGATION ON ANATOMICAL, CHEMICAL AND PHYSICAL CHARACTERISTICS OF SAXAUL WOOD (HALOXYLON PERSICUM) FROM HARESABAD-E-SABZEVAR [Volume 21, No., 2, 2006-2007, Pages 78-94]
Chemical components
Morphological characteristics and chemical components of two corn varieties
(oilseed and 704) stalks cultivated in Astara [Volume 28, Issue 3, 2013-2014, Pages 561-582]
Chemical components
Extraction, Identification and comparison of Organically chemical components in extractive of bark and wood from Eucalyptus by Gas chromatography - Mass spectrometry [Volume 29, WINTER 4, 2014-2015, Pages 644-652]
Chemical components
Morphological Characteristics and Chemical Composition of Grapevine Branches (Vitis vinifera spp.) Grown in Astara [Volume 30, WINTER 4, 2015-2016, Pages 525-537]
Chemical components
Morphological and chemical components of Ulmus glabrar, Ulmus compestris, Zelkova carpinifolia, Celtis australis [Volume 25, Issue 2, 2010-2011, Pages 248-259]
Chemical components
Comparative Study On Fiber Dimension, Density And Chemical
Components Of Two Varieties Of Rapeseed Straw [Volume 24, Issue 1, 2009-2010, Pages 36-44]
Chemical components
THE COMPARISON OF FIBER BIOMETRY AND CHEMICAL COMPONENTS OF PHRAGMITES AUSTRALIS FOR PAPERMAKING [Volume 14, 14-No. 272, 2001-2002, Pages 73-109]
Chemical components
Identification and Comparison of the Extractives Chemical Components in Wood and Bark of Planted sycamore Tree (Platanus orientalis) by GC-MS Methods [Volume 37, Issue 3, 2022-2023, Pages 229-238]
Chemical compositions
Comparative study of chemical components and morphological features
of trunk and cone fibers from loblolly pine grown in Gilan province [Volume 28, Issue 3, 2013-2014, Pages 545-560]
Chemical-mechanical pulp
The effect of TCF bleaching before and after refining on the CMP pulp properties [Volume 31, Fall 3, 2016-2017, Pages 510-521]
Chemical Oxygen Demand
Evaluating the Properties of Bleached Chemi-Mechanical Pulp (CMP) with One and Two-stage of Sodium Hypochlorite and Hydrogen Peroxide [Volume 33, Issue 2, 2018-2019, Pages 205-217]
Chemical properties
Anatomical, physical and chemical properties of Sepestan wood (Cordia myxa L.) in Iranshahr region [Volume 30, SPRING 1, 2015-2016, Pages 110-118]
Chemical Structure
Changes in Chemical Structure and Hydrophobization of the Paulownia Wood
with Fluorocarbon Resin [Volume 35, Issue 2, 2020-2021, Pages 178-194]
Chemi-mechanical Pulping
Studying from the Properties of Chemi-Mechanical Pulping and Alkaline Peroxide Mechanical Pulping of Wheat Straw Golestan province [Volume 25, Issue 1, 2010-2011, Pages 32-47]
Chenpodiaceae
Anatomical, physical and chemical properties of
(Seidlitzia rosmarinus Bunge ex Boiss) wood in irano-torani region [Volume 27, Issue 2, 2012-2013, Pages 112-225]
Chlorine dioxide
The effect of kappa factor on chlorine dioxide bleaching sequence on the properties of dissolving pulp from recycled fibers (OCC) [Volume 37, Issue 1, 2022-2023, Pages 28-37]
Choice
Consumer behaviors in the decision- making process of foreign and domestic household wooden furniture buying [Volume 34, Issue 2, 2019-2020, Pages 167-179]
CHTMA
The performance of cationized pulp fiber as paper making
wet-end additive [Volume 29, Fall 3, 2014-2015, Pages 354-367]
Cicer arietinum straw
study on the possibility of particle board tree-layer manufacturing using of Cicer arietinum stem [Volume 28, Summer 2, 2013-2014, Pages 224-237]
Citric acid
Investigation of Fire Resistance in reformed Paulownia Wood with citric acid and Comparison with Different of Fire Retardants [Volume 34, Issue 4, 2019-2020, Pages 547-562]
Cladophora green algae
Preparation of nano-cellulose from cladophora, a fibrous algae, utilizing it at improving the strength properties of CMP pulp. [Volume 31, Issue 4, 2016-2017, Pages 695-702]
Climate
Dendrochronological studies of Juniperus polycarpos in alborz mountains
(case study: Shahkuh of shahrood) [Volume 29, SPRING 1, 2014-2015, Pages 94-105]
Climate
Climate and environmental impacts on beech and oak wood
production in the Hyrcanian forests [Volume 27, Issue 3, 2012-2013, Pages 386-408]
Climate
Climate and environmental impacts on beech and oak wood
production in the Hyrcanian forests [Volume 30, Fall 3, 2015-2016, Pages 386-408]
Climate
Effects of climate variables (temperature and precipitation) on annual growth
of Zelkova carpinifolia [Volume 27, Issue 1, 2012-2013, Pages 69-80]
Clone
The effects of Poplar clones age variations and production conditions on medium density fiberboard (MDF) properties [Volume 23, Issue 1, 2008-2009, Pages 20-39]
CMC
Investigation on the effect of using PAE and CMC dual system on dry
and wet strength properties of tissue papers [Volume 28, Issue 3, 2013-2014, Pages 451-462]
CMC
Optimization of the performance of PAE resin combined with retention
aid and CMC in tissue paper production using deinked pulp [Volume 28, Issue 3, 2013-2014, Pages 489-497]
CMP
Effect of CMP fiber grafting on strength properties of its paper [Volume 28, SPRING 1, 2013-2014, Pages 24-34]
CMP
Potential of CMP pulp production of Salix species in comparison with Populus [Volume 32, Issue 4, 2017-2018, Pages 585-595]
CMP
Determination the opti mum pulping and bleaching conditions for some forest species and evaluation its papers [Volume 33, Issue 1, 2018-2019, Pages 38-49]
CMP
Analysis of photodegraded lignin from hardwood
bleached chemimechanical pulp by 13C-NMR [Volume 24, Issue 2, 2009-2010, Pages 254-263]
CMP
Delignification of CMP pulp with Terametes versicolor [Volume 24, Issue 2, 2009-2010, Pages 307-314]
CMP
Investigation on high yield chemimechanical pulping of bagasse (CMP-CTMP-APMP) [Volume 10, 10-No. 232, 2000-2001, Pages 1-90]
CMP paper
Preparation of nano-cellulose from cladophora, a fibrous algae, utilizing it at improving the strength properties of CMP pulp. [Volume 31, Issue 4, 2016-2017, Pages 695-702]
CMP PROCESS
DETERMINATION OF PRACTICAL PROPERTIES OF ALNUS GLUTINOSA GROWN AT SHORT ROTATION PERIOD IN PAPER MAKING [Volume 20, No., 1, 2005-2006, Pages 65-94]
CMP pulp
An Investigation and comparison of newsprint properties from Bamboo and Reed CMP Pulps [Volume 30, Summer 2, 2015-2016, Pages 256-265]
CMP pulp
Investigation on newsprint paper production from wheat straw and its specification [Volume 30, Summer 2, 2015-2016, Pages 320-329]
CMP pulp
Investigation on imported aspen admixture with two hardwoods
native forest species for CMP pulping [Volume 30, WINTER 4, 2015-2016, Pages 662-673]
CMP pulp
Investigation and Comparison of Newsprint Properties from Bleached CMP Pulp of Ash and Orange Woods [Volume 31, Issue 4, 2016-2017, Pages 569-580]
CMP pulp
Effects of Populous Deltoids Chips Washing Pre- Treatment Method on CMP Optical and Strength properties.
. [Volume 31, Fall 3, 2016-2017, Pages 375-387]
CMP pulp
Investigation of Optical and Mechanical Properties of Bleached Chemi-mechanical Pulps (CMP) with Oxygen, Hydrogen Peroxide and Sodium Dithionite Stages [Volume 32, Issue 3, 2017-2018, Pages 311-321]
CMP pulp
Investigate the effect of anionic trash management through removal and neutralization of dissolved and colloidal substances (DCS) On properties of CMP pulp and paper [Volume 33, Issue 3, 2018-2019, Pages 323-336]
CMP pulp
Utilization of Organic Complex of Glanapone Stab Rather than Sodium Silicate in Peroxide Bleaching of Mixed Hardwood CMP Pulp [Volume 26, Issue 1, 2011-2012, Pages 193-217]
CMP pulp
The effect of consistency on the optical properties of hydrogen peroxide bleached CMP pulp [Volume 26, Issue 2, 2011-2012, Pages 298-409]
CMP pulp
Investigation of Substituting the organic complex of sulvy-x rather than sodium silicate in CMP pulp bleaching of Mazandaran wood and paper industries [Volume 26, Issue 3, 2011-2012, Pages 411-428]
CMP pulp
Optical and physical properties of mixed hardwood CMP pulp and the birch wood [Volume 26, Issue 3, 2011-2012, Pages 523-534]
CMP pulp
The Study of Fiber Fines and Its Effects On Optical and Physical Propertie of Newsprint Paper from CMP Pulp [Volume 22, Issue 1, 2007-2008, Pages 29-40]
CMP pulp
The Effect of Different Coating Formulation on the Physical, Mechanical, and Optical Properties of Papers Made from bleached CMP [Volume 34, Issue 2, 2019-2020, Pages 193-204]
CMP pulp
Effect of Nano-fibrillated Cellulose and Chitosan Bio-polymeric System on the Optical and Mechanical Properties of Chemi-mechanical Pulp(CMP) [Volume 35, Issue 1, 2020-2021, Pages 61-75]
CMP pulp
Effect of Polyalumium Chloride and Nano-Chitosan Bio-polymeric System on the Optical and Mechanical Properties of Chemi-mechanical Pulp (CMP) [Volume 36, Issue 4, 2021-2022, Pages 368-381]
CMP pulp
The Effect of nano-Chitosan, nano-Cellulose and DTPA Spray on the Optical Properties of Paper Obtained from Chemical-mechanical Pulp (CMP) [Volume 39, Issue 1, 2024-2025, Pages 55-71]
CNanocomposite
Calcium silicate formation using of Nano-silica and wood flour calcareous-treated and investigating of properties of the wood plastic composite obtained from it [Volume 31, Fall 3, 2016-2017, Pages 486-499]
Coating
The Effect of Chitosan - Poly (vinyl alcohol) Coatings on Strength and Barrier Properties of Packaging Paper [Volume 30, Summer 2, 2015-2016, Pages 330-340]
Coating
Investigation of mechanical and optical properties of papers coated with Polycaprolactone - Nanocrystalline cellulose - zinc oxide Nanoparticle [Volume 34, Issue 1, 2019-2020, Pages 27-38]
Coating
Effects of free and microencapsulated biocides on characteristics of wood coatings and their mold growth resistance [Volume 34, Issue 1, 2019-2020, Pages 39-49]
Coating
The Effect of Different Coating Formulation on the Physical, Mechanical, and Optical Properties of Papers Made from bleached CMP [Volume 34, Issue 2, 2019-2020, Pages 193-204]
Coating
Effect of coating packing paper with polylactic acid-chitosan and polylactic acid-nano-chitosan complexes [Volume 34, Issue 4, 2019-2020, Pages 507-519]
Coating
Effect of coating type and grammage of printing paper on water drop contact angle over time [Volume 35, Issue 2, 2020-2021, Pages 165-177]
Coating
Effect of coating paper using chitosan and modified polylactic acid [Volume 35, Issue 4, 2020-2021, Pages 321-331]
Coating
Investigating the effect of coated cardboard storage in freezer coated with two layers of nano-polyurethane and nano-clay on its physical and mechanical properties [Volume 38, Issue 3, 2023-2024, Pages 205-214]
Coating
Effect of the CNFs and CNCs based-flame retardants on the fire retardancy of the hand-made coated paperboard [Volume 38, Issue 4, 2023-2024, Pages 330-340]
Coating applying method
Investigation on the effect of different methods of applying transparent coatings on adhesion strength of coating in wooden surfaces [Volume 31, Summer 2, 2016-2017, Pages 248-260]
COD
Effect of Nano TiO2 on Properties of Old Corrugated Paper Recycling Waste Water [Volume 29, WINTER 4, 2014-2015, Pages 526-237]
Cold soda pulp
Comparing the effect of alkali charge and treatment time on the properties of
bagasse and eastern cottonwood cold soda pulp [Volume 27, Issue 1, 2012-2013, Pages 16-26]
Collar
Development of Tomographic Technology (Case Study: Trees from Karaj City) [Volume 33, Issue 1, 2018-2019, Pages 100-111]
Colloid
Investigation on adsorption, configuration and performance of chitosan polyelectrolyte in pulp slurry by ellipsometry technique [Volume 34, Issue 4, 2019-2020, Pages 535-546]
Colloid
The effect of electerical conductivity on the performance and interaction of cationic starch- anionic nanosilica in pulp slurry [Volume 35, Issue 1, 2020-2021, Pages 102-112]
Colloidal charge
Identification of Cellulosic Fiberfines Properties in Kraft, Chemical Mechanical, and Recycled Pulps [Volume 33, Issue 2, 2018-2019, Pages 231-243]
Colloidal silica nanoparticles
Effect of colloidal silica nanoparticles produced from rice husk on dimensional stability and water absorption of poplar wood (Populus deltoides) [Volume 28, Issue 4, 2013-2014, Pages 763-773]
Colon
Investigation on the properties of oriented strand boards (OSB) made from mixture ten- year- old poplar clones [Volume 31, Issue 4, 2016-2017, Pages 648-661]
Color change
The effect of adding zinc oxide nanoparticles on color change and adhesion strength of polyurethane coating on wood surface [Volume 30, WINTER 4, 2015-2016, Pages 690-704]
Color changes
Investigation of the storage time on color properties and chemical compositions of particle board made from bagasse [Volume 31, SPRING 1, 2016-2017, Pages 58-66]
Color changes
The effect of glide plasma with methane gas on the hydrophobicity of poplar wood surface [Volume 36, Issue 3, 2021-2022, Pages 264-282]
Color changes
Effect of tree age, thickness and depth of black poplar timbers on color change and wettability of wood after accelerated weathering [Volume 38, Issue 2, 2023-2024, Pages 141-154]
Colorimetry
The effect of cellulose nanofibers treatment on the discoloration of historical papers [Volume 37, Issue 1, 2022-2023, Pages 73-85]
Color lightness
Effect of tree age, thickness and depth of black poplar timbers on color change and wettability of wood after accelerated weathering [Volume 38, Issue 2, 2023-2024, Pages 141-154]
Colza
The impact of chemical treatment variables on fiber quality of Colza stem
chemi-mechanical pulp [Volume 26, Issue 2, 2011-2012, Pages 371-386]
Common elm
Identification and Comparison of the Phenolic Chemical Components in Wood of Siberian elm, Common elm and Mountain elm trees by GC-MS Methods [Volume 38, Issue 3, 2023-2024, Pages 237-249]
Comparative wood anatomy
Comparative wood anatomy of three Ephedra species
(Ephedra procera, Ephedra strobilacea and Ephedra intermedia) of Iran [Volume 28, Issue 4, 2013-2014, Pages 709-719]
Comparative wood anatomy
Comparative wood anatomy of Wych Elm, English Elm,
Caucasian Elm and Hackberry [Volume 26, Issue 3, 2011-2012, Pages 564-578]
Competition
Analysis and investigation the structure of wooden bedroom furniture import market in Iran [Volume 37, Issue 1, 2022-2023, Pages 38-58]
Competitiveness Advantage
Prioritization of factors affecting sustainable supply chain management and performance in Iran wooden furniture industry
(Case study: companies producing home and office furniture) [Volume 38, Issue 1, 2023-2024, Pages 1-20]
Competitiveness Index
Applying analytical hierarchy process in ranking of the effective indices on competitiveness of the wooden furniture industry in Iran [Volume 30, WINTER 4, 2015-2016, Pages 578-594]
Composite
The utilization of two recycled polymers and bagasse fiber in wood
plastic nano / clay composites production [Volume 28, Issue 3, 2013-2014, Pages 435-450]
Composite
Investigation on properties of wood-cement panels based on
Agricultural residues [Volume 28, Issue 3, 2013-2014, Pages 583-896]
Composite
Physical and mechanical properties of wood-plastic composite made of
Canola stem residues and polypropylene [Volume 28, Issue 4, 2013-2014, Pages 628-641]
Composite
Effect of nanoclay-particles on physical and mechanical properties of composites
made of almond shell powder-polypropylene [Volume 28, Issue 4, 2013-2014, Pages 654-671]
Composite
Investigation on utilization The mechanical of Fish wastes (WF) in manufacturing of biodegradable wood plastic composites (WPCs) and high density polyethylene (HDPE) [Volume 30, Fall 3, 2015-2016, Pages 362-375]
Composite
Effects of waste polyester fibers on the mechanical and thermal properties of WPC products [Volume 30, WINTER 4, 2015-2016, Pages 552-566]
Composite
The Effect of Micro-Cellulose Length on Mechanical, Thermal and Morphological Properties in Nano/Wood Plastics Composites [Volume 31, SPRING 1, 2016-2017, Pages 154-165]
Composite
Investigation on the tensile properties and dimensional stability of polypropylene/wheat straw fiber/paper mill sludge composites [Volume 31, SPRING 1, 2016-2017, Pages 67-77]
Composite
The Study of Pulp-Polypropylene biocomposites Properties produced from non-extracted and pre-extracted Bagasse with hot water [Volume 31, SPRING 1, 2016-2017, Pages 78-91]
Composite
The effect of using Palm Flour in the Manufacture of pp-based wood-plastic Composite [Volume 31, SPRING 1, 2016-2017, Pages 30-39]
Composite
The Effect of Utilizing ZnO Nanoparticles and Eggshell on Physical and Mechanical Properties of Wood -Plastic Composite Production [Volume 31, Summer 2, 2016-2017, Pages 323-335]
Composite
Evaluation of Mechanical Properties of Old Corrugated Container Fibers – Polypropylene Composites Reinforced with Carbon Nanotubes (CNT) [Volume 32, Issue 1, 2017-2018, Pages 47-56]
Composite
The effect of elastomers and coupling agent on tensile properties and impact strength polypropylene/saw dust composites [Volume 32, Issue 2, 2017-2018, Pages 157-170]
Composite
Effect of nanoclay on mechanical properties of HDPE/wheat straw composite [Volume 27, WINTER 4, 2012-2013, Pages 595-605]
Composite
The Influence of Silica Content on Mechanical Properties of Polypropylene/Wood Powder/Silica Composite [Volume 27, WINTER 4, 2012-2013, Pages 595-605]
Composite
The Influence of Nanoclay on the Performance of HDPE/ Wheat Straw Powder Composite Produced by Two Stage Mixing Process [Volume 27, WINTER 4, 2012-2013, Pages 635-645]
Composite
Investigation on the Properties of Cement Fiber Board Produced Using Waste Paper [Volume 32, Issue 3, 2017-2018, Pages 450-461]
Composite
Investigation of Multi walled Carbon Nanotube and Microcrystalline Cellulose on Mechanical, and Morphological Properties Wood Plastics Composites [Volume 32, Issue 3, 2017-2018, Pages 334-344]
Composite
The impact of nanoclay on the performance of polypropylene/OCC fibers/nanoclay composite [Volume 27, Issue 3, 2012-2013, Pages 373-385]
Composite
The Effect of Lignocellulosic Material and Nanoclay on Physical, Mechanical and Morphological Properties of Wood Plastic Composite [Volume 27, Issue 2, 2012-2013, Pages 189-201]
Composite
Investigation on the effect of nanoclay on physical and tensile properties of nanocomposite made from reed residues [Volume 27, Issue 2, 2012-2013, Pages 202-211]
Composite
Comparing four lignocellulosic materials in the properties of
wood plastics/ nanoclay composites [Volume 27, Issue 2, 2012-2013, Pages 235-255]
Composite
Influence of paper mill sludge on the long term hygroscopic behavior
of flat pressed wood-plastic composites [Volume 27, Issue 1, 2012-2013, Pages 81-88]
Composite
Thermal properties and X-ray diffraction of wood plastic nanocomposite (effect of coupling agent and nanoclay content) [Volume 26, Issue 1, 2011-2012, Pages 151-160]
Composite
Investigation on the properties of cement-bagasse fiber composite as a
structural material [Volume 26, Issue 2, 2011-2012, Pages 291-299]
Composite
The effect of paper sludge , content and polymer types on the physical properties of wood- plastic composites [Volume 26, Issue 3, 2011-2012, Pages 486-494]
Composite
Studies On Mechanical and Morphological Proprties Of
Bagasse - Polypropylene Composite [Volume 23, Issue 2, 2008-2009, Pages 178-190]
Composite
The effect of using flame retardant mineral fillers on physical and thermal properties of poly lactic acid-rice husk composite [Volume 36, Issue 2, 2021-2022, Pages 105-118]
Composite
Investigation of the effect of waste paper fibers on the fracture behavior of fiber-gypsum board [Volume 38, Issue 3, 2023-2024, Pages 193-204]
Composite Bagasse Cement Composite Product
The use of bagasse in the manufacture of reinforced composite reinforced cement-fiber [Volume 34, Issue 2, 2019-2020, Pages 302-311]
Composition
The Possibility of Utilization of Pistachio lignocellulosic residue in Particleboard Production [Volume 36, Issue 4, 2021-2022, Pages 329-339]
Compost
Biodegradation and ecotoxicological impact of cellulose nanocomposites under Controlled Composting Conditions [Volume 33, Issue 1, 2018-2019, Pages 122-132]
Compression
Effect of press conditions on physical and mechanical properties of hydro thermo- mechanical treated poplar wood [Volume 36, Issue 3, 2021-2022, Pages 218-230]
Compression set
Densification of Paullownia wood by using of hot-press [Volume 23, Issue 2, 2008-2009, Pages 136-148]
Compression strength
Effect of nano- wollastonite on microscopic, mechanical and physical properties of cement- wood fibers composite. [Volume 30, WINTER 4, 2015-2016, Pages 567-577]
Compression strength
Compression and tension strength properties of detachable joints in MDF and particleboard [Volume 34, Issue 2, 2019-2020, Pages 205-216]
Concentration Degree
Analysis and investigation the structure of wooden bedroom furniture import market in Iran [Volume 37, Issue 1, 2022-2023, Pages 38-58]
Concora medium test (CMT)
Study on production of fluting paper from wheat straw soda – AQ pulp and OCC pulp blends [Volume 26, Issue 2, 2011-2012, Pages 387-397]
Coniophora puteana
Effects of Fungus Trametes versicolor and Coniophora puteana study,on
the Mass loss of Wood/Polypropylene Composites. [Volume 25, Issue 1, 2010-2011, Pages 102-112]
Consumer
Assessment of Customer Expectations and Preferences in Home and Office Furniture Purchase Process with Non-parametric Tests [Volume 37, Issue 1, 2022-2023, Pages 1-16]
Contact angle
Evaluate the effect of oil-heat treatment of Fir species on contact angle and adhesion strength of water based clear and acid catalyzed transparent coat [Volume 30, SPRING 1, 2015-2016, Pages 173-181]
Contact angle
Investigation of gluability and wettability properties of Medium Density Fiberboard produced using vine pruning fibers in combination with wood fibers [Volume 30, Summer 2, 2015-2016, Pages 289-298]
Contact angle
Effect of alum-cationic rosin consumption level on the properties of papers made from recycled white sheets trimmings [Volume 32, Issue 2, 2017-2018, Pages 238-250]
Contact angle
Investigation on effect of acetylation and antioxidant on weathering resistance of wood/HDPE composite [Volume 27, WINTER 4, 2012-2013, Pages 707-716]
Contact angle
Hydrophobization of Paper Using Organosilane and Titanium Dioxide Nanoparticles with Layer by Layer Method [Volume 32, Issue 4, 2017-2018, Pages 530-540]
Contact angle
Optimization of Coating Dimethoxydimethylsilane Using Plasma Enhanced Chemical Vapor Deposition (PECVD) on Coated Paper with Ethylene Vinyl Alcohol [Volume 34, Issue 1, 2019-2020, Pages 100-111]
Contact angle
Effect of alkyl ketene dimers (AKD) sizing on the properties of pulp and paper made from recycled fibers [Volume 34, Issue 1, 2019-2020, Pages 112-123]
Contact angle
The effect of corona treatment to improve the mechanical properties of nitrocellulose and polyurethane coatings used in wooden furniture [Volume 34, Issue 3, 2019-2020, Pages 326-336]
Contact angle
Effect of coating type and grammage of printing paper on water drop contact angle over time [Volume 35, Issue 2, 2020-2021, Pages 165-177]
Contact angle
Influence of Hygrothermal Modification on Surface Characteristics and Failure Modes of Poplar Wood [Volume 36, Issue 2, 2021-2022, Pages 132-143]
Contact angle
The effect of glide plasma with methane gas on the hydrophobicity of poplar wood surface [Volume 36, Issue 3, 2021-2022, Pages 264-282]
Contact angle
Effect of tree age, thickness and depth of black poplar timbers on color change and wettability of wood after accelerated weathering [Volume 38, Issue 2, 2023-2024, Pages 141-154]
Contact angle water
Barrier and Structural Properties of Coated Trimethoxymethylsilane Layer
on Coated Paper with Ethylene Vinyl Alcohol [Volume 34, Issue 2, 2019-2020, Pages 255-262]
Cooking
The effect of Bagasse alkaline treatment on Medium Density Fiberboard properties [Volume 35, Issue 3, 2020-2021, Pages 219-231]
Cooking temperature
Comparative study on pulping variables of cotton linters harvested from four different countries for alpha-cellulose pulp production [Volume 30, WINTER 4, 2015-2016, Pages 618-631]
Cooling tower
An Investigation on the possibility of utilizing domestic wood in cooling towers [Volume 25, Issue 2, 2010-2011, Pages 170-186]
Copper oxide
Influence of nano metals oxide treatment on medium density fiberboard properties made of sunflower straw fibers [Volume 30, SPRING 1, 2015-2016, Pages 97-109]
Corn
Comparing the performance of cationic starch, corn and tapioca to improve the strength characteristics of paper from old corrugated containers [Volume 31, Issue 4, 2016-2017, Pages 662-670]
Corn
Production of plastic wood nanocomposites using agricultural waste and urban polymer waste [Volume 35, Issue 4, 2020-2021, Pages 392-406]
Corn cop residues
The Potential of utilizing corn cop in particleboard production [Volume 34, Issue 4, 2019-2020, Pages 461-474]
Corner joint
Structural Performance of Corner Joint Reinforced with FRP under Diagonal Tension Loading [Volume 31, SPRING 1, 2016-2017, Pages 118-129]
Corner joint
Study on the tensile and compression tension-carrying capacity of corner V-nails [Volume 31, Issue 4, 2016-2017, Pages 621-633]
Corn stalk
Investigating the possibility of particleboard manufacture using corn
(zea mays) stalks [Volume 28, Issue 4, 2013-2014, Pages 608-627]
Cornstalks
Investigation on Size Distribution and Fiber Dimensions of Cornstalks [Volume 24, Issue 1, 2009-2010, Pages 1-14]
Corn starch
Investigation on Physical and Mechanical Properties of Nanocomposites Made From Flour Of Pistachio Shell/ Corn Starch/ Nanoclay [Volume 29, SPRING 1, 2014-2015, Pages 142-155]
Corona treatment
The effect of corona treatment to improve the mechanical properties of nitrocellulose and polyurethane coatings used in wooden furniture [Volume 34, Issue 3, 2019-2020, Pages 326-336]
Correlation Coefficient factor
Detection of defects in joints using the variations in dynamic shear modulus and Correlation Coefficient factor in Beech Wood [Volume 28, Summer 2, 2013-2014, Pages 238-257]
Corrugatedboard
Investigation on the Effects of humidity and heat of combined papers on quality of CorrugatedBoard [Volume 25, Issue 2, 2010-2011, Pages 309-320]
Corrugating board
Improvement of starch adhesive properties used in the carton industry [Volume 28, Summer 2, 2013-2014, Pages 354-363]
Cotton linter
Optimization of process variables of carboxymethyl cellulose production from alpha-cellulose obtained from cotton Linter using response surface methodology [Volume 33, Issue 4, 2018-2019, Pages 579-592]
COTTON STALK
Investigating the Effect of Cotton Stalks Bark on Physical and Mechanical Properties of Cotton Stalk Flour- Polypropylene Composite [Volume 30, SPRING 1, 2015-2016, Pages 144-161]
COTTON STALK
Optimum Production of Cellulose NanoCrystal from Cotton Stalk under Acidic Hydrolysis Condition [Volume 30, SPRING 1, 2015-2016, Pages 1-13]
COTTON STALK
The effect of using deinked mixed office waste pulp on the properties of Alkaline
Proxide Mechanical Pulp from cotton stalk [Volume 31, SPRING 1, 2016-2017, Pages 48-57]
COTTON STALK
INVESTIGATION ON SODA PULPING OF COTTON STALKS [Volume 20, No., 2, 2005-2006, Pages 185-206]
Coupling agent
An analysis of the combined effects of isocyanate HMDI and maleic anhydride
(MAPE) coupling agents on the mechanical properties of HDPE- wood flour composite [Volume 28, Summer 2, 2013-2014, Pages 290-300]
Coupling agent
Investigating the mechanical properties of wood
flour/ polypropylene/ nanoclay composite [Volume 28, SPRING 1, 2013-2014, Pages 153-168]
Coupling agent
Investigation on utilization The mechanical of Fish wastes (WF) in manufacturing of biodegradable wood plastic composites (WPCs) and high density polyethylene (HDPE) [Volume 30, Fall 3, 2015-2016, Pages 362-375]
Coupling agent
The effect of using Palm Flour in the Manufacture of pp-based wood-plastic Composite [Volume 31, SPRING 1, 2016-2017, Pages 30-39]
Coupling agent
The effect of elastomers and coupling agent on tensile properties and impact strength polypropylene/saw dust composites [Volume 32, Issue 2, 2017-2018, Pages 157-170]
Coupling agent
Thermal properties and X-ray diffraction of wood plastic nanocomposite (effect of coupling agent and nanoclay content) [Volume 26, Issue 1, 2011-2012, Pages 151-160]
Coupling agent
Effect of compatibilizer, MAPP, on physical and mechanical properties of
reed stem flour- polypropylene composites [Volume 24, Issue 2, 2009-2010, Pages 232-243]
Coupling agent
Studies On Mechanical and Morphological Proprties Of
Bagasse - Polypropylene Composite [Volume 23, Issue 2, 2008-2009, Pages 178-190]
Coupling agent
Investigating the effect of functionalized carbon nanotubes on physical and mechanical properties of wood-plastic nanocomposite [Volume 38, Issue 1, 2023-2024, Pages 59-74]
Coupling agents
Investigation of OCC Fiber/Polymers Composites in Air – Forming Production [Volume 23, Issue 2, 2008-2009, Pages 91-101]
CPAM
Effect of cationic poly acrylamide - nano bentonite system on retention,
drainage and properties of recycled paper from OCC [Volume 29, Fall 3, 2014-2015, Pages 474-483]
C-PAM
The performance of cationized pulp fiber as paper making
wet-end additive [Volume 29, Fall 3, 2014-2015, Pages 354-367]
CREOSOTE
THE EFFECT OF MARINE BORERS ATTACK ON SEVEN IRANIAN WOOD SPECIES IN BANDAR ABBAS COASTS [Volume 17, 17-No. 300, 2002-2003, Pages 57-72]
CREOSOTE
RESISTANCE OF BEECH, OAK AND HORNBEAM WOOD SPECIES AGAINST MARINE BORERS IN BOSHEHR PORT COASTS IN PERSIAN GULF [Volume 18, No. 1, 2003-2004, Pages 63-76]
CREOSOTE
DURABILITY OF 6 WOOD SPECIES AGAINST MARINE BORERS IN CHABAHAR PORT COASTS (OMAN SEA) [Volume 18, No. 2, 2003-2004, Pages 205-218]
CREOSOTE
RESISTANCE OF SOME IRANIAN HARDWOODS AGAINST MARINE BORERS IN BOSHEHR PORT COAST (PERSIAN GULF) [Volume 19, No., 1, 2004-2005, Pages 115-131]
CREOSOTE
RESISTANCE OF SOME IRANIAN HARDWOODS AGAINST MARINE BORERS IN MAHSHAHR (PERSIAN GULF), BANDAR TORKMAN AND NOSHAHR (CASPIAN SEA) COASTS [Volume 19, No., 2, 2004-2005, Pages 193-210]
Cross laminated timber
Performance assessment of bending and shear stiffness of hybrid Beech-Poplar cross-laminated timber (CLT) using experimental and finite element methods [Volume 37, Issue 2, 2022-2023, Pages 99-112]
Crown and branch of kiwi residues
The Possibility of Using Kiwi Wood Residues for Kraft Pulp and Liner Paper Production [Volume 30, Fall 3, 2015-2016, Pages 408-418]
CTMP
Investigation on high yield chemimechanical pulping of bagasse (CMP-CTMP-APMP) [Volume 10, 10-No. 232, 2000-2001, Pages 1-90]
Culture
Assessing safety culture in the North of Iran wood and paper companies [Volume 29, SPRING 1, 2014-2015, Pages 156-169]
Cu nanoparticles
Effect of mat moisture content and Cu nanoparticles on heat transfer and physical and mechanical properties of poplar particleboard [Volume 27, Issue 2, 2012-2013, Pages 348-360]
Cu nano-particles. Density profile
Evaluation of Cu nano particles addition on the vertical density profile
and mechanical properties of medium density fiberboard (MDF) [Volume 29, Fall 3, 2014-2015, Pages 368-375]
Cupressus arizonica and Morus alba tree woods
Designing and manufacturing of polyester composites reinforced with natural and synthetic fibers as an alternative for the wood in music instruments [Volume 26, Issue 4, 2011-2012, Pages 732-756]
Cupressus sempervirens l.var. horizantalis
Investigation on relationship between tree rings of Cupressus
sempervirens l . var . horizantalis and climatic variables [Volume 27, Issue 2, 2012-2013, Pages 361-371]
Customer
Consumer behaviors in the decision- making process of foreign and domestic household wooden furniture buying [Volume 34, Issue 2, 2019-2020, Pages 167-179]
Cutting speed
Different CNC machining condition of paulownia wood by CNC;
Influence on the abbott roughness parameters [Volume 28, Summer 2, 2013-2014, Pages 301-312]
Cutting speed
Effect of Moisture Content and Cutting Speed on Shearing Properties of Four Almond Tree Varieties [Volume 31, Fall 3, 2016-2017, Pages 388-397]
Cyanoethylation
The effect of pulp and cellulose nanofiber cyanoethylation on the physical properties of transformer insulating paper [Volume 31, SPRING 1, 2016-2017, Pages 1-13]
D
Dalbergia sissoo (shisham)
Comparative on the Microscopic Properties of wood near the pith to bark in Dalbergia sissoo in ShoshDanial [Volume 30, Fall 3, 2015-2016, Pages 351-361]
Damping factor
The effect of preheating in nitrogen medium on acoustic properties of walnut and white mulberry [Volume 34, Issue 3, 2019-2020, Pages 349-360]
Date palm
Physical and anatomical features and drying behavior of the boards produced from old date palm trees (Phoenix dactylifera L.) in Bam city [Volume 28, Issue 3, 2013-2014, Pages 498-508]
Date palm
Comparison of stiffness parameters of two kinds of date palm using nondestructive test [Volume 33, Issue 1, 2018-2019, Pages 133-141]
Date palm
Investigation on production of particleboard from Date palm residues [Volume 1, Issue 148, 1995, Pages 50-110]
Date palm
INVESTIGATION ON THE POSSIBILITY OF PARTICLEBOARD PRODUCTION FROM LIGNOCELLULOSIC SOURCES IN SOURTHERN REGION OF IRAN (2) REPORT 2: THE POTENTIAL OF DATE PALM RESIDUES AND PROSOPIS (MESQUITE) WOOD IN PARTICLEBOARD INDUSTRY [Volume 15, 15-No. 278, 2001-2002, Pages 61-87]
Date palm
THE EFFECT OF RESIN CONTENT AND PRESS TIME ON PROPERTIES OF PARTICLEBOARD PRODUCTION FROM SOUTHERN LIGNOCELLULOSIC MATERIALS IN IRAN [Volume 20, No., 1, 2005-2006, Pages 47-64]
Date plam
MDF Production from Date Palm Pruning Residues in Pilot plant Scale [Volume 29, WINTER 4, 2014-2015, Pages 594-608]
Date plam
Gypsum bounded board production reinfoced with Date Palm (Phoenix dactylifera L.) pruning residues fibers [Volume 30, SPRING 1, 2015-2016, Pages 60-71]
DEAMATEL technique
Identification and Prioritization of factors affecting competitiveness of Classic Furniture by using ANP (Case study: Tehran Province) [Volume 33, Issue 2, 2018-2019, Pages 179-195]
DECAY
Assessment of decay in poplar and beech by using of x-ray non-destructive method [Volume 33, Issue 1, 2018-2019, Pages 112-121]
DECAY
RELATIONSHIP BETWEEN WOOD EXTRACTIVES AND WOOD DECAY [Volume 18, No. 2, 2003-2004, Pages 139-154]
DECAY
Evaluation of the internal defaults and decay in old timber in building using non-destructive ground penetration radar (GPR) method [Volume 37, Issue 3, 2022-2023, Pages 217-228]
DED sequence
Effect of Hornbeam chips fungal pre-treatment on bleachability of its Bio-kraft pulp [Volume 30, Fall 3, 2015-2016, Pages 419-429]
Defect
Development of Tomographic Technology (Case Study: Trees from Karaj City) [Volume 33, Issue 1, 2018-2019, Pages 100-111]
Deinked pulp of MOW
The effect of using deinked mixed office waste pulp on the properties of Alkaline
Proxide Mechanical Pulp from cotton stalk [Volume 31, SPRING 1, 2016-2017, Pages 48-57]
Deinking
The effect of poly acrylic acid, sodium salt grafted to poly ethylene oxide complex
on the physical and optical properties of old newsprint paper deinked pulp [Volume 28, Issue 3, 2013-2014, Pages 405-416]
Deinking
The effect of different charges of sodium dithionite and bleaching
times on the optical and mechanical properties and COD
of bleached recycled mixed ONP and OMG pulps [Volume 29, Fall 3, 2014-2015, Pages 411-421]
Deinking
Investigation on the physical and mechanical properties of waste newspaper deinked pulp by cellulase enzyme compared to conventional method [Volume 26, Issue 2, 2011-2012, Pages 243-255]
Deinking
Enzymatic Versus Chemical Deinking of Old Newspaper [Volume 25, Issue 2, 2010-2011, Pages 223-233]
Deinking
Effect of refining of deinked pulp on the optical, physical and
mechanical properties of paper [Volume 24, Issue 1, 2009-2010, Pages 148-157]
Deinking
Use of Central Composite Design for Optimization of ultrasonic pre-treatment parameters on chemical deinking of old newspaper [Volume 33, Issue 4, 2018-2019, Pages 489-500]
Delamination
Effect of soy flour addition into urea-formaldehyde resin on formaldehyde emission [Volume 34, Issue 3, 2019-2020, Pages 387-396]
Delamination
Mechanical and physical properties of plywood bonded with Bio-based Soy-tannin adhesive [Volume 37, Issue 3, 2022-2023, Pages 251-260]
Delignification and Kraft
Investigation lignin dissolution at pulping process of wheat straw [Volume 25, Issue 2, 2010-2011, Pages 302-308]
Delphi method
Application of Delfi Method in Identification of Influential Factors on Risk Management Model for Wooden Structures [Volume 36, Issue 3, 2021-2022, Pages 194-204]
DELTOIDS
INVESTIGATION OF PULP PAPER CHARACTERISTIC OF THREE POPLAR COLONS, P.NIGRA, 69/55, 144/9 DELTOIDS, ORAMERICAN 214 [Volume 20, No., 2, 2005-2006, Pages 151-168]
DELTOIDS
INVESTIGATION ON TENSILE STRENGTH OF DOWEL JOINT IN PARTICLEBOARD FASTENING [Volume 20, No., 2, 2005-2006, Pages 169-184]
Deltoids poplar
Evaluating the addition of cellulose nano fibers to reinforce of high yield kraft pulp produced from P.deltoides clone 69-55 [Volume 30, WINTER 4, 2015-2016, Pages 606-617]
Densification
Densification of Paullownia wood by using of hot-press [Volume 23, Issue 2, 2008-2009, Pages 136-148]
Density
Evaluating the quality of the medium density fiberboard made from kenaf
core and stalk [Volume 28, SPRING 1, 2013-2014, Pages 48-61]
Density
Investigation on the influence of the density reduction of the particleboard by
canola residues on the properties of particleboard [Volume 28, Issue 3, 2013-2014, Pages 463-475]
Density
The effect of using deinked mixed office waste pulp on the properties of Alkaline
Proxide Mechanical Pulp from cotton stalk [Volume 31, SPRING 1, 2016-2017, Pages 48-57]
Density
Study of some Apparent, Anatomical and Physical properties of Divdal ҆s (Ammodendron persicum) wood from Zirkooh-Qhaen [Volume 27, WINTER 4, 2012-2013, Pages 664-676]
Density
Investigation on effect of nano gel wollastonite on properties usage of wood-cement composites manufactured from rice straw fibers [Volume 33, Issue 3, 2018-2019, Pages 453-465]
Density
Investigation of selected physical, biometrical and mechanical properties of
Cerasus mahaleb (L.) mill in the middle Zagros forest site [Volume 27, Issue 2, 2012-2013, Pages 267-274]
Density
Papermaking aspects of five common varieties of sugarcane in Iran [Volume 27, Issue 1, 2012-2013, Pages 114-128]
Density
Prediction mechanical properties of particleboard and analysis the interaction effect of slenderness ratio and resin content, using linear, quadratic and exponential equation [Volume 26, Issue 3, 2011-2012, Pages 511-522]
Density
Comparative Study On Fiber Dimension, Density And Chemical
Components Of Two Varieties Of Rapeseed Straw [Volume 24, Issue 1, 2009-2010, Pages 36-44]
Density
INVESTIGATION ON RELATION OF FIBER DIMENSION AND WOOD DENSITY WITH-AGE AND RING WIDTH IN E.CAMALDULENSIS DEHNH [Volume 19, No., 1, 2004-2005, Pages 69-98]
Density
THE INVESTIGATION ON ANATOMICAL, CHEMICAL AND PHYSICAL CHARACTERISTICS OF SAXAUL WOOD (HALOXYLON PERSICUM) FROM HARESABAD-E-SABZEVAR [Volume 21, No., 2, 2006-2007, Pages 78-94]
Density
THE EFFECTS OF DENSITY AND PRESS TIME ON POPLAR INSULATION PARTICLEBOARD PROPERTIES [Volume 21, No., 2, 2006-2007, Pages 115-122]
Density
Thermography as a non-Destructive method in evaluation of wood density for Oak and Beech [Volume 34, Issue 1, 2019-2020, Pages 89-99]
Density
Effect of nano gel wollastonite on physical, mechanical and morphological properties of bagasse-cement composites [Volume 34, Issue 3, 2019-2020, Pages 397-408]
Density
The effect of the bacteria of nano fiber cellulose on the functional properties of cementitious structures [Volume 37, Issue 4, 2022-2023, Pages 293-305]
DENSITY PROFILE
Effect of great size wood particles on density profile and physical -mechanical properties of particleboards made from poplar [Volume 26, Issue 4, 2011-2012, Pages 719-731]
DENSITY PROFILE
A STUDY ON DENSITY PROFILE OF THREE TYPES OF MEDIUM DENSITY FIBERBAORD (MDF) USED IN IRAN MARKET [Volume 20, No., 2, 2005-2006, Pages 285-301]
Deposits
A feasibility study on identification of stickies and their sources in packaging paper mill [Volume 38, Issue 2, 2023-2024, Pages 114-127]
Derivatization Followed by Reductive Cleavage
Studying on the Soda and Dioxane Lignin of Bagasse using Derivatization Followed by Reductive Cleavage (DFRC) [Volume 29, WINTER 4, 2014-2015, Pages 538-549]
Detachable joint
Compression and tension strength properties of detachable joints in MDF and particleboard [Volume 34, Issue 2, 2019-2020, Pages 205-216]
Diagonal tensile and compression
Study on the tensile and compression tension-carrying capacity of corner V-nails [Volume 31, Issue 4, 2016-2017, Pages 621-633]
Diagonal tension
Investigation on bending moment resistance of L- shaped screwed corner joints constructed of Plywood members [Volume 27, WINTER 4, 2012-2013, Pages 731-742]
DIAMETER
Investigation on the effect of wooden dowel diameter, penetration depth and species on the bending moment resistance under diagonal tensile load of corner joints in case-type furniture [Volume 28, SPRING 1, 2013-2014, Pages 11-24]
DIAMETER
Investigation of selected physical, biometrical and mechanical properties of
Cerasus mahaleb (L.) mill in the middle Zagros forest site [Volume 27, Issue 2, 2012-2013, Pages 267-274]
DIAMETER
INVESTIGATION ON TRACHIEDS CHARACTERISTICS OF PINUS TEADA [Volume 19, No., 1, 2004-2005, Pages 25-48]
Dicyandiamide
Assessment of accelerated aging for thermally upgraded transformer
insulation paper by dicyandiamide [Volume 31, Fall 3, 2016-2017, Pages 446-457]
Differential Scanning Calorimeter
THE INVESTIGATION OF POLY LACTIC ACID /WHEAT STRAW FIBERS TREATED WITH SILANE COMPOSITES [Volume 30, Summer 2, 2015-2016, Pages 207-219]
Diffusion theory
Numerical and experimental establishment of kiln drying schedule for Iranain beech based on diffusion theory [Volume 32, Issue 4, 2017-2018, Pages 486-497]
Dimensional stability
Effect of colloidal silica nanoparticles produced from rice husk on dimensional stability and water absorption of poplar wood (Populus deltoides) [Volume 28, Issue 4, 2013-2014, Pages 763-773]
Dimensional stability
Improvement of dimensional stability and mechanical properties of gypsum particleboard by adding white cement [Volume 30, SPRING 1, 2015-2016, Pages 132-143]
Dimensional stability
Effect of chemical modification of wood flour on properties of polypropylene-nano SiO2 hybrid nanocomposite [Volume 30, WINTER 4, 2015-2016, Pages 674-689]
Dimensional stability
Investigation on the tensile properties and dimensional stability of polypropylene/wheat straw fiber/paper mill sludge composites [Volume 31, SPRING 1, 2016-2017, Pages 67-77]
Dimensional stability
Evaluation of composite properties made of sunflower stem flour and natural poly lactic acid (PLA) polymer [Volume 33, Issue 3, 2018-2019, Pages 391-401]
Dimensional stability
Effect of cemical modification of lignocellulosics fiber on physical and
mechanical properties in MDF [Volume 24, Issue 2, 2009-2010, Pages 167-182]
Dimensional stability
Influences of Acetylation on Water Absorption and Dimensional Stability of Manufactured Paper [Volume 22, Issue 2, 2007-2008, Pages 99-108]
Dimensional stability
Investigation of Fire Resistance in reformed Paulownia Wood with citric acid and Comparison with Different of Fire Retardants [Volume 34, Issue 4, 2019-2020, Pages 547-562]
Dimensional stability
Effect of density and industrial wood particles to cement ratio on mechanical and physical properties of wood cement composites [Volume 35, Issue 4, 2020-2021, Pages 362-375]
Dimensional stability
Evaluation of Applied Performance of Thermally-Modified Fir Wood by Retification Process [Volume 36, Issue 3, 2021-2022, Pages 205-217]
Dimensional stability
Effect of heat treatment and boric acid impregnation on the properties and fire resistance of poplar and radiata pine wood [Volume 38, Issue 1, 2023-2024, Pages 75-86]
Diotrol
Effects of free and microencapsulated biocides on characteristics of wood coatings and their mold growth resistance [Volume 34, Issue 1, 2019-2020, Pages 39-49]
Dioxane Lignin
Studying on the Soda and Dioxane Lignin of Bagasse using Derivatization Followed by Reductive Cleavage (DFRC) [Volume 29, WINTER 4, 2014-2015, Pages 538-549]
Disintegrator
Determination of optimum Refining of paper made of recovered Kraft liner [Volume 23, Issue 1, 2008-2009, Pages 12-19]
Dissolving pulp
The potential of acid pre-hydrolyzed Soda-AQ process to manufacture highly purified α-cellulose [Volume 30, SPRING 1, 2015-2016, Pages 162-172]
Dissolving pulp
The effect of kappa factor on chlorine dioxide bleaching sequence on the properties of dissolving pulp from recycled fibers (OCC) [Volume 37, Issue 1, 2022-2023, Pages 28-37]
Dodecyltrichlorosilane
Fabrication of Durable, Super-hydrophobic and Self-cleaning Wood Surfaces Based on Silica-Carnauba Wax, Nano-hybrid coating into Epoxy resin matrix [Volume 38, Issue 4, 2023-2024, Pages 281-295]
Dovetail joint
Dynamic and static comparison of Dovetail , Tongue and Groove in Firs [Volume 35, Issue 1, 2020-2021, Pages 33-45]
Dowel joint tension- Bending moment
Stress analysis and failure prediction in dowel joint by FEM [Volume 26, Issue 4, 2011-2012, Pages 708-718]
Dowel wooden
The influence of reinforcement of polyvinyl acetate adhesive (PVAc) with carbon nanofiber (CNF) on the bending moment capacity of the corner joint of the furniture [Volume 34, Issue 2, 2019-2020, Pages 242-254]
Drainability
Comparing the Effect of Silica Sol and Bentonite Nanoparticles on the Performance of Cationic Starch for Drainability, Retention and Strength Properties of Recycled Paper [Volume 32, Issue 2, 2017-2018, Pages 227-237]
Drainage
Effect of cationic poly acrylamide - nano bentonite system on retention,
drainage and properties of recycled paper from OCC [Volume 29, Fall 3, 2014-2015, Pages 474-483]
DRYING TEMPERATURE
Investigation on the Influence of Paper Making Variables on Apparent Density of Paper Produced From Old Corrugated Container [Volume 22, Issue 1, 2007-2008, Pages 1-17]
DRYING TEMPERATURE
THE EFFECT OF HEAT ON WOOD ACIDITY IN PARTICLEBOARD PROCESS [Volume 18, No. 1, 2003-2004, Pages 39-62]
Dry medium
Heat treatment of wood in dry medium and investigation on its effect on surface wettability and adhesion strength of coating [Volume 31, Summer 2, 2016-2017, Pages 362-373]
DSC
Thermal properties and X-ray diffraction of wood plastic nanocomposite (effect of coupling agent and nanoclay content) [Volume 26, Issue 1, 2011-2012, Pages 151-160]
DTA
Thermal analysis by TGA and DTA method of wood-polymer of furfurylated beech and fir wood [Volume 33, Issue 4, 2018-2019, Pages 501-510]
DTPA
The Effect of nano-Chitosan, nano-Cellulose and DTPA Spray on the Optical Properties of Paper Obtained from Chemical-mechanical Pulp (CMP) [Volume 39, Issue 1, 2024-2025, Pages 55-71]
Duncan test
Study of the effective indices on imports of Wooden furniture in Iran [Volume 28, Summer 2, 2013-2014, Pages 205-223]
Dyes
Effects of plant dyes ( walnut shell , tea plant , henna ) on paper's stability in manuscript restoration [Volume 26, Issue 4, 2011-2012, Pages 647-666]
Dynamic- Mechanical Analysis
Comparison of Tensile Properties and Mechanical-Dynamic Analysis of Poly-Lactic Acid / Poly-Ethylene Compounded with Natural Fibers [Volume 33, Issue 2, 2018-2019, Pages 218-230]
Dynamic properties
Nondestructive evaluation of dynamic properties in beach wood using free vibration method on free- free bar [Volume 29, WINTER 4, 2014-2015, Pages 633-643]
Dynamic shear modulus
Detection of defects in joints using the variations in dynamic shear modulus and Correlation Coefficient factor in Beech Wood [Volume 28, Summer 2, 2013-2014, Pages 238-257]
Dynamic tests
Nondestructive evaluation of flexural strength comparing to static bending strength in wood from Pine and Beech [Volume 34, Issue 2, 2019-2020, Pages 157-166]
E
EARLY WOOD AND LATE WOOD
INVESTIGATION ON TRACHIEDS CHARACTERISTICS OF PINUS TEADA [Volume 19, No., 1, 2004-2005, Pages 25-48]
Earthquake
Application of Delfi Method in Identification of Influential Factors on Risk Management Model for Wooden Structures [Volume 36, Issue 3, 2021-2022, Pages 194-204]
Eastman G-3003
Investigation on Morphological and Mechanical Properties of Coupling Agents on Baggass Polypropylene Composites [Volume 30, SPRING 1, 2015-2016, Pages 85-96]
EC
Effect of Nano TiO2 on Properties of Old Corrugated Paper Recycling Waste Water [Volume 29, WINTER 4, 2014-2015, Pages 526-237]
E.CAMALDULENSIS
INVESTIGATION ON RELATION OF FIBER DIMENSION AND WOOD DENSITY WITH-AGE AND RING WIDTH IN E.CAMALDULENSIS DEHNH [Volume 19, No., 1, 2004-2005, Pages 69-98]
ECF
Investigation and Comparison of Bagasse Soda Pulps Properties Bleached with Total Chlorine Free (TCF) and Elemental Chlorine Free (ECF) Stages [Volume 32, Issue 4, 2017-2018, Pages 473-485]
ECF
Preparation of Bleached Soda Pulp from Canola Stalks [Volume 25, Issue 1, 2010-2011, Pages 80-90]
ECF Bleaching
The Effect of ECF Bleaching on Optical and Mechanical Properties of Bagasse Soda Pulp [Volume 31, Summer 2, 2016-2017, Pages 349-361]
Eco-friendly
Fabrication of Durable, Super-hydrophobic and Self-cleaning Wood Surfaces Based on Silica-Carnauba Wax, Nano-hybrid coating into Epoxy resin matrix [Volume 38, Issue 4, 2023-2024, Pages 281-295]
Ecophysiology
Comparing growth rate, wood fiber biometry, and adaptability of different tamarisk (Tamarix aphylla L.) populations planted in Garmsar [Volume 36, Issue 1, 2021-2022, Pages 26-39]
Ecotoxicological
Biodegradation and ecotoxicological impact of cellulose nanocomposites under Controlled Composting Conditions [Volume 33, Issue 1, 2018-2019, Pages 122-132]
EDTA
Laboratory Study of Synergistic Effects of Mixtures of Organic Biocides, Metal Chelator and Antioxidant Materials against Rainbow White-rot Fungus [Volume 32, Issue 3, 2017-2018, Pages 422-435]
EFFECTIVE ALKALI
INVESTIGATION ON DELIGNIFICATION AND PULPING OF SPRUCE (PICEA ABIES) [Volume 18, No. 2, 2003-2004, Pages 219-238]
Eldar pine
Study the basic building wooden structures to withstand the effects of weather and destructive biological agents Alborz research center [Volume 33, Issue 3, 2018-2019, Pages 402-416]
Eldar pine (Pinus eldarica) tree
Identification and comparison of organic chemical components in leaves of the planted Elder Pine (Pinus eldarica) and Sycamore (Platanus orientalis) using GC-MS methods [Volume 37, Issue 3, 2022-2023, Pages 261-270]
Electerical Conductivity
The effect of electerical conductivity on the performance and interaction of cationic starch- anionic nanosilica in pulp slurry [Volume 35, Issue 1, 2020-2021, Pages 102-112]
Electron microscope
Effect of nanoclay-particles on physical and mechanical properties of composites
made of almond shell powder-polypropylene [Volume 28, Issue 4, 2013-2014, Pages 654-671]
Electrospinning
Preparation and Characterization of Electrospun Nanofiber of Poly (Vinyl Alcohol) and Cellulose Nanocrystals [Volume 33, Issue 3, 2018-2019, Pages 438-452]
Ellipsometry
Investigation on adsorption, configuration and performance of chitosan polyelectrolyte in pulp slurry by ellipsometry technique [Volume 34, Issue 4, 2019-2020, Pages 535-546]
Elm
Investigation on Wood Plastic Composite Resistance against Water, Fire and Fungal attack Compared to Untreated Maple and Elm [Volume 22, Issue 2, 2007-2008, Pages 81-98]
Elm wood species
The effect of adding zinc oxide nanoparticles on color change and adhesion strength of polyurethane coating on wood surface [Volume 30, WINTER 4, 2015-2016, Pages 690-704]
Energy Release Rate
Fracture Behavior of Beech-Furan Wood Polymer under Mode I [Volume 29, WINTER 4, 2014-2015, Pages 609-622]
Environment
Effect of using waste tire rubber on physical and mechanical properties of Paulownia Oriented strand boards [Volume 36, Issue 1, 2021-2022, Pages 1-13]
Enzymatic activation
Biotechnology Application in Wood Industry: Utilization of Phenol
Oxidase Enzyme as a Renewable Binder in MDF Manufacture [Volume 27, Issue 2, 2012-2013, Pages 275-293]
Enzymatic Post-Refining
Comparative Investigation of the Effect of Pre and Post -Enzymatic Refining on OCC Pulp Properties [Volume 29, Summer 2, 2014-2015, Pages 254-265]
Enzymatic Pre- Refining
Comparative Investigation of the Effect of Pre and Post -Enzymatic Refining on OCC Pulp Properties [Volume 29, Summer 2, 2014-2015, Pages 254-265]
EPTMAC
Effect of CMP fiber grafting on strength properties of its paper [Volume 28, SPRING 1, 2013-2014, Pages 24-34]
ERIC
Applying Enzymatic treatment and Refining Sequence to Investigate Their Effect on Properties of Pulp and Paper Produced from Mixed Office Waste Paper [Volume 35, Issue 2, 2020-2021, Pages 195-204]
Error Correction Model (ECM)
The Effect of Exchange Rate on the Imports of Paper Products in Iran [Volume 36, Issue 4, 2021-2022, Pages 356-367]
Escherichia coli
Investigation of antibacterial properties of melamine coatings containing chitosan and clay nanofibers [Volume 37, Issue 3, 2022-2023, Pages 239-250]
ETHANOL PULP
INVESTIGATION OF PROPERTIES OF ETHANOL-ALKALI, KRAFT AND SODA PULPS PREPARED FROM WHEAT STRAW [Volume 21, No., 2, 2006-2007, Pages 105-114]
Ethylenediamine
Study of Organic Bases Potential in Bagasse Pulping [Volume 22, Issue 2, 2007-2008, Pages 73-80]
Ethylene / propylene / Diane / monomer
The effect of elastomers and coupling agent on tensile properties and impact strength polypropylene/saw dust composites [Volume 32, Issue 2, 2017-2018, Pages 157-170]
Ethylene vinyl alcohol
Barrier and Structural Properties of Coated Trimethoxymethylsilane Layer
on Coated Paper with Ethylene Vinyl Alcohol [Volume 34, Issue 2, 2019-2020, Pages 255-262]
EUCALYPT
Position and role of tension wood in trees - Case study: Eucalypts [Volume 31, Summer 2, 2016-2017, Pages 237-247]
EUCALYPT
THE EFFECT OF RESIN CONTENT AND PRESS TIME ON PROPERTIES OF PARTICLEBOARD PRODUCTION FROM SOUTHERN LIGNOCELLULOSIC MATERIALS IN IRAN [Volume 20, No., 1, 2005-2006, Pages 47-64]
Eucalyptus
Utilization of pomegranate tree pruning in the core layer of particleboard
produced from Eucalyptus camedulensis wood [Volume 28, Summer 2, 2013-2014, Pages 381-391]
Eucalyptus
Evaluation of antioxidant properties and total phenolic and flavonoids content of Eucalyptus camaldulensis and Pinus sylvestris bark [Volume 28, Issue 3, 2013-2014, Pages 522-533]
Eucalyptus
Extraction, Identification and comparison of Organically chemical components in extractive of bark and wood from Eucalyptus by Gas chromatography - Mass spectrometry [Volume 29, WINTER 4, 2014-2015, Pages 644-652]
Eucalyptus
Investigation the possibility of particleboard manufacturing using Hemp stalk [Volume 33, Issue 1, 2018-2019, Pages 63-75]
Eucalyptus
The effect of wood species on particleboard properties [Volume 26, Issue 1, 2011-2012, Pages 58-71]
Eucalyptus
THE UTILIZATION OF BAGASSE AND LOGGING RESIDUES OF EUCALYPTUS FOR PARTICLEBOARD PRODUCTION [Volume 11, 11-No. 243, 2000-2001, Pages 1-60]
Eucalyptus
PROPERTIES OF EUCALYPTUS STERIATICALYX WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 11, 11-No. 243, 2000-2001, Pages 61-123]
Eucalyptus
PROPERTIES OF EUCALYPTUS INTERTEXTA WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 12, 12-No. 251, 2000-2001, Pages 73-139]
Eucalyptus
PROPERTIES OF EUCALYPTUS MICROTHECA WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 13, 13-No. 255, 2001, Pages 43-106]
Eucalyptus camaldulensis
Investigation on Physical and Mechanical Properties of Medium Density Fiberboard Produced From Eucalyptus camaldulensis Fibers [Volume 25, Issue 1, 2010-2011, Pages 1-10]
Eucalyptus camaldulensis
Effect of Refining Intensity on Pulp and Paper Properties Made of Eucalyptus Camaldulensis Wood [Volume 24, Issue 1, 2009-2010, Pages 124-133]
Eucalyptus camaldulensis
Comparative Investigation on the Anatomical,Chemical characteristics of E.camaldulensis From region jiroft [Volume 23, Issue 1, 2008-2009, Pages 83-90]
Eucalyptus camaldulensis
Properties of Eucalyptus Camaldulensis wood grown in southern region of Iran [Volume 10, 10-No. 232, 2000-2001, Pages 91-147]
Eucalyptus camaldulensis
EFFECTS OF ENVIRONMENTAL FACTORS ON FORMATION OF LIGNIN IN EUCALYPTUS CAMALDULENSIS DEHN. GROWN IN KHOSESTAN-IRAN [Volume 18, No. 1, 2003-2004, Pages 1-38]
EUCALYPTUS INTERTEXTA
The effect of press temperature and press time on Medium Density Fiberboard (MDF) properties produced from EucalyptusIntertexta fibers [Volume 24, Issue 1, 2009-2010, Pages 26-35]
EUCALYPTUS INTERTEXTA
INVETIGATION ON DURABILITY OF EUCALYPTUS WOOD (E. INTERTEXTA R. T.BAKER) BY FIELD TEST STAKES [Volume 21, No., 1, 2006-2007, Pages 52-60]
EUCALYPTUS MICROTHECA
PULP AND PAPER PROPERTIES OF EUCALYPTUS MICROTHECA GROWN IN SOUTHERN REGION OF IRAN [Volume 13, 13-No. 255, 2001, Pages 43-107]
Eucalyptus steriaticalyx
Investigation on physical and mechanical properties of medium density
fiberboard produced from Eucalyptus steriaticalyx fibers [Volume 27, Issue 1, 2012-2013, Pages 89-99]
Evaporator
Simulation of condensing unit of liquor in Mazandaran wood and paper industry [Volume 32, Issue 4, 2017-2018, Pages 565-575]
Exchange rate
The Effect of Exchange Rate on the Imports of Paper Products in Iran [Volume 36, Issue 4, 2021-2022, Pages 356-367]
Expanded Polystyrene
The effect ratio of adhesive urea formaldehyde melamine formaldehyde on the properties lightweight particleboard made from expanded polystyrene [Volume 29, WINTER 4, 2014-2015, Pages 626-635]
Expanded polyurethane foam
Production and evaluation of lightweight particle board using expanded polyurethane foam [Volume 38, Issue 2, 2023-2024, Pages 87-99]
Export barriers
Analysis of Barriers to Furniture Exporting in Iran Using Interpretative Structural Modeling (ISM) [Volume 34, Issue 2, 2019-2020, Pages 180-192]
Exposed root
The effect of erosion on anatomical characteristics of root and bark of Juniperus excelsa [Volume 27, WINTER 4, 2012-2013, Pages 529-583]
External fibrillation
The effect of fiber external fibrillation on paper properties [Volume 28, SPRING 1, 2013-2014, Pages 1-10]
EXTRACTIVES
Evaluating the durability of particleboard made from steam pretreated poplar
wood particles against of Polyporus versicolor [Volume 29, Fall 3, 2014-2015, Pages 493-501]
EXTRACTIVES
Extraction, Identification and comparison of Organically chemical components in extractive of bark and wood from Eucalyptus by Gas chromatography - Mass spectrometry [Volume 29, WINTER 4, 2014-2015, Pages 644-652]
EXTRACTIVES
Effects of Populous Deltoids Chips Washing Pre- Treatment Method on CMP Optical and Strength properties.
. [Volume 31, Fall 3, 2016-2017, Pages 375-387]
EXTRACTIVES
RELATIONSHIP BETWEEN WOOD EXTRACTIVES AND WOOD DECAY [Volume 18, No. 2, 2003-2004, Pages 139-154]
EXTRACTIVES
Identification of Walnut Tree Leaves Extractives Chemical Composition and
the Effect of Growth Time [Volume 39, Issue 1, 2024-2025, Pages 71-82]
Extruder
An analysis of the combined effects of isocyanate HMDI and maleic anhydride
(MAPE) coupling agents on the mechanical properties of HDPE- wood flour composite [Volume 28, Summer 2, 2013-2014, Pages 290-300]
F
False acacia
Comparative GC/MS analysis of chemical components in wood extracts
of Sweet Locust and False Acacia [Volume 28, Issue 4, 2013-2014, Pages 755-762]
Feeding rate
Different CNC machining condition of paulownia wood by CNC;
Influence on the abbott roughness parameters [Volume 28, Summer 2, 2013-2014, Pages 301-312]
FIBER
Investigation on the properties of cement-bagasse fiber composite as a
structural material [Volume 26, Issue 2, 2011-2012, Pages 291-299]
FIBER
The effects of Poplar clones age variations and production conditions on medium density fiberboard (MDF) properties [Volume 23, Issue 1, 2008-2009, Pages 20-39]
FIBER
STUDY ON COTTON STEM FOR CELLULOSIC INDUSTRIES [Volume 18, No. 2, 2003-2004, Pages 239-267]
FIBER
INVESTIGATION ON POSSIBILITY OF MDF PRODUCTION FROM REED [Volume 19, No., 2, 2004-2005, Pages 225-242]
FIBER
THE EFFECT OF PRODUCTION VARIABLES ON MEDIUM DENSITY FIBERBOARD QUALITY MADE FROM TALABE -ANZALYE REED [Volume 20, No., 1, 2005-2006, Pages 1-22]
Fiberboard
Influence of nano metals oxide treatment on medium density fiberboard properties made of sunflower straw fibers [Volume 30, SPRING 1, 2015-2016, Pages 97-109]
Fiberboard
The effects of steaming time, press time and resin content on MDF properties [Volume 25, Issue 1, 2010-2011, Pages 11-21]
Fiberboard
The effects of Poplar clones age variations and production conditions on medium density fiberboard (MDF) properties [Volume 23, Issue 1, 2008-2009, Pages 20-39]
Fiber cement
Investigation on the Properties of Cement Fiber Board Produced Using Waste Paper [Volume 32, Issue 3, 2017-2018, Pages 450-461]
Fiber cement
Investigation on the properties of cement fiber board produced
using waste paper [Volume 27, Issue 2, 2012-2013, Pages 338-347]
FIBER DIAMETER
Biometrical properties of hornbeam fibers
from Astara [Volume 26, Issue 3, 2011-2012, Pages 535-544]
FIBER DIAMETER
COMPARATIVE INVESTIGATION ON FIBER DIMENSIONS OF TRUNK AND BRANCH WOOD OF CARPINUS BETULUS L. [Volume 19, No., 2, 2004-2005, Pages 243-254]
FIBER DIMENSION
Investigation the fiber dimensions, chemical composition and soda pulp production from sorghum straw [Volume 29, SPRING 1, 2014-2015, Pages 34-43]
FIBER DIMENSION
Study of variation trends of fiber dimensions in longitudinal direction
of Zagross wheat straw in Golestan province for papermaking [Volume 27, Issue 3, 2012-2013, Pages 545-555]
FIBER DIMENSION
Papermaking aspects of five common varieties of sugarcane in Iran [Volume 27, Issue 1, 2012-2013, Pages 114-128]
FIBER DIMENSION
Comparative Study On Fiber Dimension, Density And Chemical
Components Of Two Varieties Of Rapeseed Straw [Volume 24, Issue 1, 2009-2010, Pages 36-44]
FIBER DIMENSION
INVESTIGATION ON RELATION OF FIBER DIMENSION AND WOOD DENSITY WITH-AGE AND RING WIDTH IN E.CAMALDULENSIS DEHNH [Volume 19, No., 1, 2004-2005, Pages 69-98]
FIBER DIMENSIONS
INVESTIGATION ON TREND OF FIBER VARIATION OF PINUS ELDARICA [Volume 16, 16-No. 293, 2002-2003, Pages 73-93]
FIBER DIMENSIONS
COMPARATIVE INVESTIGATION ON FIBER DIMENSIONS OF TRUNK AND BRANCH WOOD OF CARPINUS BETULUS L. [Volume 19, No., 2, 2004-2005, Pages 243-254]
FIBER DIRECTION
ACOUSTICAL PROPERTIES OF WOOD IN 2000, 4000 AND 8000 IN HERTZ FERQUENCIES [Volume 14, 14-No. 272, 2001-2002, Pages 27-47]
Fiber fines
Identification of Cellulosic Fiberfines Properties in Kraft, Chemical Mechanical, and Recycled Pulps [Volume 33, Issue 2, 2018-2019, Pages 231-243]
Fiber fines
The Study of Fiber Fines and Its Effects On Optical and Physical Propertie of Newsprint Paper from CMP Pulp [Volume 22, Issue 1, 2007-2008, Pages 29-40]
Fiber fines
The effect of fractionation and fine material removal from old corrugated container pulp on the properties of the produced paperboard in comparison to long fiber application [Volume 36, Issue 4, 2021-2022, Pages 382-393]
FIBER LENGTH
Investigation of the antomical, biometry and chemical characteristics
of juvenile and mature poplar (Populus alba) wood [Volume 28, SPRING 1, 2013-2014, Pages 182-193]
FIBER LENGTH
Investigation of selected physical, biometrical and mechanical properties of
Cerasus mahaleb (L.) mill in the middle Zagros forest site [Volume 27, Issue 2, 2012-2013, Pages 267-274]
FIBER LENGTH
The impact of chemical treatment variables on fiber quality of Colza stem
chemi-mechanical pulp [Volume 26, Issue 2, 2011-2012, Pages 371-386]
FIBER LENGTH
Biometrical properties of hornbeam fibers
from Astara [Volume 26, Issue 3, 2011-2012, Pages 535-544]
FIBER LENGTH
Effect of fiber length on mechanical properties of wood composite plastic (Polypropylene) [Volume 25, Issue 2, 2010-2011, Pages 187-200]
FIBER LENGTH
Evaluation of Anatomical and Physical Properties of Juvenile/Mature Wood of
Populus alba and Populus × euramericana [Volume 24, Issue 1, 2009-2010, Pages 134-147]
FIBER LENGTH
PROPERTIES OF EUCALYPTUS STERIATICALYX WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 11, 11-No. 243, 2000-2001, Pages 61-123]
FIBER LENGTH
PROPERTIES OF EUCALYPTUS INTERTEXTA WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 12, 12-No. 251, 2000-2001, Pages 73-139]
FIBER LENGTH
PROPERTIES OF EUCALYPTUS MICROTHECA WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 13, 13-No. 255, 2001, Pages 43-106]
FIBER LENGTH
COMPARATIVE INVESTIGATION ON FIBER DIMENSIONS OF TRUNK AND BRANCH WOOD OF CARPINUS BETULUS L. [Volume 19, No., 2, 2004-2005, Pages 243-254]
Fiber morphology
Morphological and chemical components of Ulmus glabrar, Ulmus compestris, Zelkova carpinifolia, Celtis australis [Volume 25, Issue 2, 2010-2011, Pages 248-259]
Fiber-polypropylene composite
The influence of fiber lignin content on mechanical properties of wood
fiber-polypropylene composites [Volume 29, SPRING 1, 2014-2015, Pages 1-11]
Fiber refining
Investigation on the effect of cellulose fiber surface characteristics on mechanical properties of cellulose fiber /polypropylene composite [Volume 30, Summer 2, 2015-2016, Pages 183-193]
Fiber reinforced polymer
Structural Performance of Corner Joint Reinforced with FRP under Diagonal Tension Loading [Volume 31, SPRING 1, 2016-2017, Pages 118-129]
Fiber reinforced polymers
Investigation affect of fiber reinforced polymer (FRP) on stress carrying capacity of miter corner joint under diagonal tension loading [Volume 35, Issue 4, 2020-2021, Pages 307-320]
Fiber Reinforced Polymers (FRP)
Investigation of withdrawal resistance of reinforced T-shaped joint with fiber reinforced composites [Volume 35, Issue 3, 2020-2021, Pages 294-305]
Fiber wall thickness
Biometrical properties of hornbeam fibers
from Astara [Volume 26, Issue 3, 2011-2012, Pages 535-544]
Ficus carica
Anatomical, physical and biometric properties of Ficus carica in longitudinal and transverse direction of tree stem [Volume 34, Issue 2, 2019-2020, Pages 228-241]
Filed Emission Scanning Electronic Microscope
The effect of Nano-wollastonite on bending properties and fire resistance characteristics of wood flour/polypropylene composite [Volume 31, Fall 3, 2016-2017, Pages 425-434]
Filler Modification
Influence of filler modification on physical and mechanical properties of wood plastic composite [Volume 34, Issue 4, 2019-2020, Pages 435-447]
Fillers
Study of using water softening process byproduct, calcium carbonate on fine paper production [Volume 30, SPRING 1, 2015-2016, Pages 14-25]
Fillers
Comparison of filler type performance on paper properties in the presence of cationic rosin sizing agent [Volume 32, Issue 2, 2017-2018, Pages 215-226]
Fillers
Flexural Properties of Wood-Plastic Composites Made From Lignocellulosic Fillers and Recycled High Density Polyethylene Manufactured Using a Dry Blend/Hot Press Method [Volume 22, Issue 2, 2007-2008, Pages 109-120]
Fine papers
Investigation the causal relation the economic growth with consumption and imports of fine papers (Writing and printing & Newsprint paper) in Iran [Volume 29, SPRING 1, 2014-2015, Pages 117-131]
Fines
The impact of chemical treatment variables on fiber quality of Colza stem
chemi-mechanical pulp [Volume 26, Issue 2, 2011-2012, Pages 371-386]
Fines
Effect of shape and particle size of mechanical pulp fines on paper properties [Volume 26, Issue 4, 2011-2012, Pages 605-621]
Finger joint
Detection of defects in joints using the variations in dynamic shear modulus and Correlation Coefficient factor in Beech Wood [Volume 28, Summer 2, 2013-2014, Pages 238-257]
Finite element method
The impact of truss structure on stiffness by finite element method [Volume 32, Issue 1, 2017-2018, Pages 69-82]
Finite element method
The effect of the type of chair connection on the stress distribution and structural failure by to finite element method [Volume 32, Issue 1, 2017-2018, Pages 106-117]
Finite element method
Stress analysis and failure prediction in dowel joint by FEM [Volume 26, Issue 4, 2011-2012, Pages 708-718]
Finite element method
Performance assessment of bending and shear stiffness of hybrid Beech-Poplar cross-laminated timber (CLT) using experimental and finite element methods [Volume 37, Issue 2, 2022-2023, Pages 99-112]
Fire and Trametes versicolor
Investigation on Wood Plastic Composite Resistance against Water, Fire and Fungal attack Compared to Untreated Maple and Elm [Volume 22, Issue 2, 2007-2008, Pages 81-98]
Fire retardant
The effect of nano wollastonite on the fire resistance and the adhesion properties of water based acrylic coating in wood surface [Volume 33, Issue 2, 2018-2019, Pages 166-178]
Fire-Retarding Properties
Study on Fire-Retarding Properties of Nano-Wollastonite
in Fir Wood (Abies alba) [Volume 28, Summer 2, 2013-2014, Pages 252-265]
Fir species
Evaluate the effect of oil-heat treatment of Fir species on contact angle and adhesion strength of water based clear and acid catalyzed transparent coat [Volume 30, SPRING 1, 2015-2016, Pages 173-181]
Fir Wood
Study on Fire-Retarding Properties of Nano-Wollastonite
in Fir Wood (Abies alba) [Volume 28, Summer 2, 2013-2014, Pages 252-265]
Fixation
The effects of wood extractive on the fixation and leaching of ACC
preservative in Beech (Fagus orientalis Lipsky) wood [Volume 28, SPRING 1, 2013-2014, Pages 62-71]
Fixed Bed Reactor
Identification of compounds derived in pyrolysis oils from Oak,
Poplar wood and Bagasse at 573 oK [Volume 28, Issue 3, 2013-2014, Pages 476-488]
Flame retardancy
Effect of the CNFs and CNCs based-flame retardants on the fire retardancy of the hand-made coated paperboard [Volume 38, Issue 4, 2023-2024, Pages 330-340]
Flammability
Investigation of Fire Resistance in reformed Paulownia Wood with citric acid and Comparison with Different of Fire Retardants [Volume 34, Issue 4, 2019-2020, Pages 547-562]
Flexibility
Investigation of the effect of waste paper fibers on the fracture behavior of fiber-gypsum board [Volume 38, Issue 3, 2023-2024, Pages 193-204]
Flexographic printing
Adhesion improvement of water-based flexographic inks on polyethylene coated paperboard by silane adhesion promoters [Volume 33, Issue 1, 2018-2019, Pages 76-87]
Flexural modulus
Evaluation of composite properties made of sunflower stem flour and natural poly lactic acid (PLA) polymer [Volume 33, Issue 3, 2018-2019, Pages 391-401]
Flexural strength
Effect of nanoclay on mechanical properties of HDPE/wheat straw composite [Volume 27, WINTER 4, 2012-2013, Pages 595-605]
Flexural strength
The Influence of Nanoclay on the Performance of HDPE/ Wheat Straw Powder Composite Produced by Two Stage Mixing Process [Volume 27, WINTER 4, 2012-2013, Pages 635-645]
Flexural strength
The impact of nanoclay on the performance of polypropylene/OCC fibers/nanoclay composite [Volume 27, Issue 3, 2012-2013, Pages 373-385]
Flexural strength
Investigation on the impact of multi wall carbon nano tubes (MWCNT) addition on the mechanical properties, water absorption and thickness swelling of polypropylene/old corrugated container fibers composite [Volume 27, Issue 3, 2012-2013, Pages 522-535]
Flexural strength
Investigation on the stress relaxation behavior of milled
newsprint filled polyethylene composite [Volume 27, Issue 2, 2012-2013, Pages 226-234]
Flexural strength
Creep behavior of the composites made from creep behavior of the composites made from waste materials of OCC recycling mills [Volume 26, Issue 4, 2011-2012, Pages 798-810]
Flexural strength
Increasing the flexural strength capacity of cement composite
with natural fibres [Volume 24, Issue 2, 2009-2010, Pages 206-218]
Flexural strength
Investigation of composite of three layers of cement and ionolite [Volume 35, Issue 1, 2020-2021, Pages 113-125]
Flexural strength
Production of plastic wood nanocomposites using agricultural waste and urban polymer waste [Volume 35, Issue 4, 2020-2021, Pages 392-406]
Floatation
Comparing the Performance of the Combination of Surfactant and Soap
in Wastepaper Deinking [Volume 30, SPRING 1, 2015-2016, Pages 26-36]
FLOCCULATION
Potential of GL as cationic polymer to control stickies of OCC pulp [Volume 33, Issue 2, 2018-2019, Pages 256-269]
Flour Of Pistachio Shell
Investigation on Physical and Mechanical Properties of Nanocomposites Made From Flour Of Pistachio Shell/ Corn Starch/ Nanoclay [Volume 29, SPRING 1, 2014-2015, Pages 142-155]
Fluid transfer coefficient
Effect of wetwood and blue stain (Ceratocystis spp.) on the drying rate and fluid transport coefficients of poplar (P. nigra) [Volume 29, WINTER 4, 2014-2015, Pages 572-580]
Fluorocarbon
Changes in Chemical Structure and Hydrophobization of the Paulownia Wood
with Fluorocarbon Resin [Volume 35, Issue 2, 2020-2021, Pages 178-194]
Folding Endurance
Effect of refining of deinked pulp on the optical, physical and
mechanical properties of paper [Volume 24, Issue 1, 2009-2010, Pages 148-157]
Forecasting
Forecasting of printing and writing paper consumption in Iran using artificial neural network and classical methods [Volume 30, WINTER 4, 2015-2016, Pages 632-652]
Formaldehyde
Evaluation of formaldehyde emissions from composite wood products [Volume 28, Summer 2, 2013-2014, Pages 195-204]
Formaldehyde release
Effect of using waste tire rubber on physical and mechanical properties of Paulownia Oriented strand boards [Volume 36, Issue 1, 2021-2022, Pages 1-13]
Fourier transform infrared
Calcium silicate formation using of Nano-silica and wood flour calcareous-treated and investigating of properties of the wood plastic composite obtained from it [Volume 31, Fall 3, 2016-2017, Pages 486-499]
Fourier Transform Infrared (FTIR)
Investigation effect of Weathering on Acetylated Beech Wood by FTIR
Spectroscopy and Electron Microscopic [Volume 25, Issue 1, 2010-2011, Pages 48-61]
Fourier-transform infrared spectroscopy
Effect of thermal modification on chemical and physical properties of Iranian Beech (Fagus orientalis) and Velvet Maple (Acer Velutinum) [Volume 33, Issue 1, 2018-2019, Pages 142-154]
Fracture Mechanics
Fracture Behavior of Beech-Furan Wood Polymer under Mode I [Volume 29, WINTER 4, 2014-2015, Pages 609-622]
Fracture Toughness
Fracture Behavior of Beech-Furan Wood Polymer under Mode I [Volume 29, WINTER 4, 2014-2015, Pages 609-622]
Free drying
Investigation on the Influence of Paper Making Variables on Apparent Density of Paper Produced From Old Corrugated Container [Volume 22, Issue 1, 2007-2008, Pages 1-17]
Free vibration method
Nondestructive evaluation of dynamic properties in beach wood using free vibration method on free- free bar [Volume 29, WINTER 4, 2014-2015, Pages 633-643]
Freezing
Investigating the effect of coated cardboard storage in freezer coated with two layers of nano-polyurethane and nano-clay on its physical and mechanical properties [Volume 38, Issue 3, 2023-2024, Pages 205-214]
Frequency
ACOUSTICAL PROPERTIES OF WOOD IN 2000, 4000 AND 8000 IN HERTZ FERQUENCIES [Volume 14, 14-No. 272, 2001-2002, Pages 27-47]
FSP
RELATIONSHIP BETWEEN MOISTURE CONTENT AND ULTRASONIC WAVE SPEED DURING KILN DRYING OF BASSWOOD LUMBER [Volume 21, No., 1, 2006-2007, Pages 1-8]
FTIR
The effect of core layer treatment and almond shell powder content in the glue line on the pull off adhesion sandwich panel [Volume 31, SPRING 1, 2016-2017, Pages 141-153]
FTIR
Investigation on possibility of making a Nano composite consist of Pebax and Nano cellulose [Volume 31, SPRING 1, 2016-2017, Pages 92-104]
FTIR
The effect of water vapor treatment of wood flour on physical and mechanical properties of hybrid composite made of poplar fiber and recycled polypropylene [Volume 32, Issue 3, 2017-2018, Pages 411-421]
FTIR
Qualitative Structural Characterization of Two Lignin Samples and Quantitative Determination of Hydroxyl and Methoxyl Functional Groups in Kraft Lignin via Acetylation [Volume 32, Issue 3, 2017-2018, Pages 369-381]
FTIR
Investigation of Fire Resistance in reformed Paulownia Wood with citric acid and Comparison with Different of Fire Retardants [Volume 34, Issue 4, 2019-2020, Pages 547-562]
FT-IR
The effect of recycling process on the chemical properties and wettability of obtained fibers from MDF wastes [Volume 32, Issue 4, 2017-2018, Pages 553-564]
FT-IR spectroscopy
Investigation on the effect of acetylation and reduction treatments on the chromophore groups of isolated lignin from unbleached hardwoods chemimecanical pulp using FT-IR spectroscopy [Volume 29, SPRING 1, 2014-2015, Pages 79-93]
FT-IR spectroscopy
Studing the effect of reducing agents (sodium borhydrade and sodium dithionite)
on chemical structures of poplar kraft and bagasse soda alkali lignin
by FT-IR spectroscopy [Volume 27, Issue 3, 2012-2013, Pages 556-568]
FT-IR spectroscopy
Effect of steam treatment on chemical changes of wood components [Volume 26, Issue 4, 2011-2012, Pages 682-698]
FTIR spectroscopy
Investigation on mechanical properties of HDPE recycled composite filled by furfural residue produced from bagasse [Volume 30, Fall 3, 2015-2016, Pages 376-387]
FTIR spectroscopy
Wood plastics composites: Bond formation mechanism and
mechanical properties [Volume 27, Issue 1, 2012-2013, Pages 27-37]
FT_IR spectrum
Use of unconventional water (rain) in urea-formaldehyde adhesive (Arian sina company case study) [Volume 33, Issue 2, 2018-2019, Pages 270-279]
Functionalization
Evaluation of Mechanical Properties of Old Corrugated Container Fibers – Polypropylene Composites Reinforced with Carbon Nanotubes (CNT) [Volume 32, Issue 1, 2017-2018, Pages 47-56]
Fungal decay
Influence of fungal decay on durability and hardness strength characteristics of bagasse/PP composite [Volume 26, Issue 1, 2011-2012, Pages 173-192]
Fungal decay
Effect of Gamma-Ray on the Physical, Mechanical, Morphological and, Biological durability Properties of WPC Composite [Volume 37, Issue 1, 2022-2023, Pages 86-98]
Fungal hypha
Identification of staining fungi in imported Norway spruce lumber [Volume 29, SPRING 1, 2014-2015, Pages 44-56]
Fungal pre-treatment
Effect of Hornbeam chips fungal pre-treatment on bleachability of its Bio-kraft pulp [Volume 30, Fall 3, 2015-2016, Pages 419-429]
Fungi and Celcure
Study on Durability of Oak Wood by Field test stakes [Volume 25, Issue 1, 2010-2011, Pages 22-31]
Fungicide
Study of side effects of Thiophanate-methyl fungicide on aesthetic and structural properties of paper [Volume 32, Issue 2, 2017-2018, Pages 261-274]
Fungicide
The effect of Benomyl antifungal on the gall ink used in historical documents [Volume 34, Issue 2, 2019-2020, Pages 276-289]
Furfural
Control of Inhibitory factors in the Bio-refinery of bagasse pith [Volume 33, Issue 4, 2018-2019, Pages 553-563]
Furfural
Use soda lignin and modify it with furfural as adhesive to make plywood [Volume 36, Issue 4, 2021-2022, Pages 293-304]
Furniture
Survey the Situation of Furniture foreign trade, determine and prioritize the influencing indexes on export development
(Case Study: Household Furniture) [Volume 29, Summer 2, 2014-2015, Pages 299-309]
Furniture
Investigating the Status of Enterprise Entrepreneurship in Public and Private Companies Furniture [Volume 33, Issue 4, 2018-2019, Pages 522-530]
Furniture
Analysis of Barriers to Furniture Exporting in Iran Using Interpretative Structural Modeling (ISM) [Volume 34, Issue 2, 2019-2020, Pages 180-192]
Furniture industry
Evaluation of the effective indexes on industrial buyer satisfaction in the supply chain of the home wooden furniture industry in Tehran province [Volume 30, Fall 3, 2015-2016, Pages 475-490]
G
G-3015 and G-3216
Investigation on Morphological and Mechanical Properties of Coupling Agents on Baggass Polypropylene Composites [Volume 30, SPRING 1, 2015-2016, Pages 85-96]
Gas chromatography
Identification of compounds derived in pyrolysis oils from Oak,
Poplar wood and Bagasse at 573 oK [Volume 28, Issue 3, 2013-2014, Pages 476-488]
Gas chromatography
Identification and comparison of oil compounds derived from pyrolysis of sound wood and decayed wood of beech by using Gas Chromatography and Mass Spectrometry (GC/MS) [Volume 30, Summer 2, 2015-2016, Pages 243-255]
Gas chromatography
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood and Bark of Oak by Atomic Adsorption and GC-MS Methods [Volume 32, Issue 2, 2017-2018, Pages 275-286]
Gas chromatography
Study on the Possibility of Identification and Comparison of Chemical Components in Wood Alnus Subcordata and Alnus Glutinosa GC-MS Methods [Volume 33, Issue 1, 2018-2019, Pages 1-11]
Gas chromatography
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood of Persuan maple and Caucasian maple tree by Atomic Absorption and GC-MS Methods [Volume 34, Issue 3, 2019-2020, Pages 361-371]
Gas chromatography
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood and Bark of Mulberry tree by Atomic Absorption and GC-MS Methods [Volume 35, Issue 3, 2020-2021, Pages 283-293]
Gas chromatography
Identification and Comparison of the Extractives Chemical Components in Wood and Bark of Planted sycamore Tree (Platanus orientalis) by GC-MS Methods [Volume 37, Issue 3, 2022-2023, Pages 229-238]
Gas chromatography
Identification and Comparison of the Phenolic Chemical Components in Wood of Siberian elm, Common elm and Mountain elm trees by GC-MS Methods [Volume 38, Issue 3, 2023-2024, Pages 237-249]
GC-Mass
Identification of Walnut Tree Leaves Extractives Chemical Composition and
the Effect of Growth Time [Volume 39, Issue 1, 2024-2025, Pages 71-82]
GC-MS
A Study on the Possibility of Extraction, Identification and Removal of Metallic Ions and Resins in Bleached Bagass Pulp by ECF Stages [Volume 30, SPRING 1, 2015-2016, Pages 72-84]
Giant milkweed
Investigation on mechanical and thermal properties of giant milkweed (Calotropis persica) fibers -plastics composites [Volume 29, SPRING 1, 2014-2015, Pages 94-105]
Glanapone stab
Utilization of Organic Complex of Glanapone Stab Rather than Sodium Silicate in Peroxide Bleaching of Mixed Hardwood CMP Pulp [Volume 26, Issue 1, 2011-2012, Pages 193-217]
Glass fiber
Features of wood-plastic composites with the base of thermo set epoxy [Volume 26, Issue 2, 2011-2012, Pages 314-325]
Glass fiber
Designing and manufacturing of polyester composites reinforced with natural and synthetic fibers as an alternative for the wood in music instruments [Volume 26, Issue 4, 2011-2012, Pages 732-756]
Glass fiber
A Study on water absorption and thickness swelling behavior
of wood flour/glass fiber hybrid composites [Volume 24, Issue 2, 2009-2010, Pages 315-321]
Glutaraldehyde
Determination the optimal conditions of chemical modification on Poplar wood with Glutaraldehyde and physical properties of products [Volume 31, Summer 2, 2016-2017, Pages 211-223]
Glutaraldehyde
Effects of the Combined Modification Process of Glutaraldehyde/ paraffin on Biological and Mechanical properties of Poplar wood [Volume 31, Issue 4, 2016-2017, Pages 606-620]
GMDH-Type Neural Netwok
A mathematical model to predict particleboard properties using the
GMDH-type neural network and genetic algorithm [Volume 29, Fall 3, 2014-2015, Pages 376-389]
Golestan Province
The manufacture of particleboard using mixture of golestan province wheat straw
and cotton bolls reinforced with nano-clay particles [Volume 28, Summer 2, 2013-2014, Pages 277-289]
Grading
Detection and differentiation of the beech tree knot (Fagus orientalis Libsky) by non-destructive stress wave method [Volume 37, Issue 4, 2022-2023, Pages 282-292]
Grammage
Effect of coating type and grammage of printing paper on water drop contact angle over time [Volume 35, Issue 2, 2020-2021, Pages 165-177]
Granger causality
Investigation the causal relation the economic growth with consumption and imports of fine papers (Writing and printing & Newsprint paper) in Iran [Volume 29, SPRING 1, 2014-2015, Pages 117-131]
GRAPE PRUNINGS RESIDUES
UTILIZATION OF GRAPE PRUNINGS RESIDUES IN PRODUCTION OF PARTICLEBOARD [Volume 19, No., 2, 2004-2005, Pages 159-174]
Graphene oxide
The use of black liquor and nano-graphene oxide in urea formaldehyde adhesive to improve the mechanical and physical properties of particleboard [Volume 32, Issue 3, 2017-2018, Pages 359-368]
Graphite
Effect of Adding Several Graphite-Based Materials to Urea Formaldehyde Adhesive on Thermal and Mechanical Properties of MDF board [Volume 38, Issue 2, 2023-2024, Pages 100-113]
Green Warehousing
Effective indicators for the stability of a stable supply chain model in the cellulosic industry by Vickor method. [Volume 39, Issue 1, 2024-2025, Pages 12-26]
Ground penetration radar
Evaluation of the internal defaults and decay in old timber in building using non-destructive ground penetration radar (GPR) method [Volume 37, Issue 3, 2022-2023, Pages 217-228]
Gypsum
Application of bagasse in composites nano-wollastonite-reinforced gypsum base structures [Volume 35, Issue 2, 2020-2021, Pages 138-151]
Gypsum
Investigation of the effect of nano-wollastonite on the functional properties of gypsum-based composites made of rice straw [Volume 36, Issue 1, 2021-2022, Pages 14-25]
Gypsum board
Gypsum bounded board production reinfoced with Date Palm (Phoenix dactylifera L.) pruning residues fibers [Volume 30, SPRING 1, 2015-2016, Pages 60-71]
Gypsum particleboard
Investigation of the sound absorption properties of gypsum particleboard
produced with kenaf stalks and nano clay [Volume 29, Fall 3, 2014-2015, Pages 434-442]
Gypsum particleboard
Improvement of dimensional stability and mechanical properties of gypsum particleboard by adding white cement [Volume 30, SPRING 1, 2015-2016, Pages 132-143]
H
H2O2 bleaching
Effect of storage and bleaching of cotton fiber pulp on the stability of Bond paper optical properties [Volume 34, Issue 2, 2019-2020, Pages 217-227]
H2S
Comparison of the efficiency of two adsorbents activated carbon and beech wood powder copper-modified in removing sulfide ions (S-2) from the black liquor of Kraft pulp and paper [Volume 35, Issue 4, 2020-2021, Pages 376-391]
HALOXTLON
TECHNOLOGICAL CHARACTERISTICS OF SAXAUL WOOD IN IRAN (KERMAN PROVINCE) [Volume 18, No. 1, 2003-2004, Pages 89-108]
Haloxylon
Investigation Produce of Particleboard with use of Bagasse and Haloxylon sp. in [Volume 24, Issue 1, 2009-2010, Pages 99-116]
HALOXYLON SP
INVESTIGATION ON THE POSSIBILITY OF PARTICLEBOARD PRODUCTION FROM HALOXYLON SP. AND WHEAT STRAW [Volume 17, 17-No. 300, 2002-2003, Pages 27-56]
Hand made paper
The effect of dry- heat aging on properties of handmade papers reinforced with cellulose nanofibers treatment [Volume 36, Issue 4, 2021-2022, Pages 317-328]
HARDENER CONTENT
UTILIZATION OF BEECH SLABS RESIDUES IN PARTICLEBOARDS PRODUCTION [Volume 20, No., 1, 2005-2006, Pages 111-132]
HARDENER CONTENT AND PRESS TIME
INVESTIGATION OF THE PRODUCTION CONDITION ON THE QUALITY OF PARTICLE BOARD MADE OF BAGASSE [Volume 20, No., 2, 2005-2006, Pages 237-254]
Hardwoods kraft
Study on the mechanical and optical properties of kraft liner paper produced
from mixing of OCC and virgin hardwoods kraft pulp [Volume 24, Issue 2, 2009-2010, Pages 264-274]
Harvest time
The effect of harvesing time on kenaf biomass and quality of carton top liner [Volume 36, Issue 1, 2021-2022, Pages 40-52]
HDPE
The utilization of two recycled polymers and bagasse fiber in wood
plastic nano / clay composites production [Volume 28, Issue 3, 2013-2014, Pages 435-450]
HDPE
Chemical Treatment of Rice Husk with Acetic Acid substitute for MAPE Compatibilizer in Rice Husk/High Density Poly Ethylene Composites [Volume 30, Fall 3, 2015-2016, Pages 443-456]
Heart wood
Comparative study of delignification efficiency and pulp yield of heart wood and sap wood of Populus deltoids by kraft and soda processes [Volume 25, Issue 1, 2010-2011, Pages 138-146]
HEARTWOOD
INVETIGATION ON DURABILITY OF EUCALYPTUS WOOD (E. INTERTEXTA R. T.BAKER) BY FIELD TEST STAKES [Volume 21, No., 1, 2006-2007, Pages 52-60]
Heat transfer
Effect of mat moisture content and Cu nanoparticles on heat transfer and physical and mechanical properties of poplar particleboard [Volume 27, Issue 2, 2012-2013, Pages 348-360]
Heat transfer
Investigation on the heat transfer and evolution of temperature gradient through wood during drying; Case study: beech (Fagus orientalis) and spruce (Picea abies) [Volume 25, Issue 2, 2010-2011, Pages 234-247]
Heat-treatment in nitrogen medium
The effect of preheating in nitrogen medium on acoustic properties of walnut and white mulberry [Volume 34, Issue 3, 2019-2020, Pages 349-360]
Heavy metals
Use of magnetic nano bio composites prepared from fibers, nanocrystalline cellulose and carboxy methylcellulose in adsorption of heavy metals )Nickel and Lead( [Volume 35, Issue 4, 2020-2021, Pages 332-347]
Heavy metals
Preparation of adsorbent from recycle newspaper and removal of metal ions from the pulp and paper mills wastewater [Volume 39, Issue 1, 2024-2025, Pages 1-11]
Hemicelulose
Evaluating the durability of particleboard made from steam pretreated poplar
wood particles against of Polyporus versicolor [Volume 29, Fall 3, 2014-2015, Pages 493-501]
Hemp fiber
Designing and manufacturing of polyester composites reinforced with natural and synthetic fibers as an alternative for the wood in music instruments [Volume 26, Issue 4, 2011-2012, Pages 732-756]
Hemp fibers
The effect of dry- heat aging on properties of handmade papers reinforced with cellulose nanofibers treatment [Volume 36, Issue 4, 2021-2022, Pages 317-328]
Hemp stalk
Investigation the possibility of particleboard manufacturing using Hemp stalk [Volume 33, Issue 1, 2018-2019, Pages 63-75]
Herbal Extract
The use of Thyme extract (Zataria Multiflora) to make antibacterial food packaging paper [Volume 39, Issue 1, 2024-2025, Pages 41-54]
High density poly ethylene
Flexural Properties of Wood-Plastic Composites Made From Lignocellulosic Fillers and Recycled High Density Polyethylene Manufactured Using a Dry Blend/Hot Press Method [Volume 22, Issue 2, 2007-2008, Pages 109-120]
HIGH DENSITY POLYETHYLENE
Tensile and Impact Properties of Polyethylene/ Olive Mill Sludge Composites [Volume 29, Summer 2, 2014-2015, Pages 230-241]
HIGH DENSITY POLYETHYLENE
Study on the effect of polymer types and Quality of lignocellulosic materials on the Physical and Mechanical properties of wood/plastic composite [Volume 30, WINTER 4, 2015-2016, Pages 595-605]
HIGH DENSITY POLYETHYLENE
A STUDY ON THE LONG TERM WATER ABSORPTION AND THICKNESS SWELLING BEHAVIOR OF WOOD-PLASTIC COMPOSITE PANELS [Volume 20, No., 2, 2005-2006, Pages 255-270]
HIGH DENSITY POLYETHYLENE
THE EFFECT OF PRODUCING METHOD ON THE MECHANICAL PROPERTIES OF WOOD PLASTIC COMPOSITES MADE FROM PARTICLEBOARD WASTE [Volume 21, No., 1, 2006-2007, Pages 33-42]
High Density Poly Ethylene/ Wood flour
The Investigation of Acetylation and Anti-Oxidant Effect on Weathering of wood
Plastic Composites By Means of FTIR and Color Metry (Color measurement) [Volume 25, Issue 1, 2010-2011, Pages 70-79]
HIGH POLYETHYLENE
MECHANICAL PROPERTIES OF WOOD-PLASTIC COMPOSITE MADE FROM PARTICLEBOARD AND MDF WASTES AND POLYETHYLENE (HDPE) WASTES [Volume 20, No., 2, 2005-2006, Pages 271-284]
H- joint
Investigating the bending strength of wooden pin in
H-shaped joints in MDF [Volume 27, Issue 3, 2012-2013, Pages 423-433]
Holding Time
Evaluation of Physical and Mechanical Properties of Hygro-thermal Modified Wood [Volume 32, Issue 1, 2017-2018, Pages 1-12]
Holocellulose
Investigation of the quality of cellulosic compounds of some Calotropis procera Willd. ecotypes in southern Iran [Volume 36, Issue 3, 2021-2022, Pages 171-181]
Hooralazim and talab Anzali
Comparative investigation on the Biological, Anatomical, Physical and Chemical Characteristics of reeds from Hooralazim and talab Anzali [Volume 2, 2- No 166, 1996, Pages 1-115]
HORB BEAM
DURABILITY OF 6 WOOD SPECIES AGAINST MARINE BORERS IN CHABAHAR PORT COASTS (OMAN SEA) [Volume 18, No. 2, 2003-2004, Pages 205-218]
Hornbeam and iron wood
Identification and Comparison of Organic Chemical Components in Wood and Bark of Hornbeam and Ironwood Wood by GC-MS Methods [Volume 37, Issue 2, 2022-2023, Pages 150-165]
HORNBEAM WOOD
Engineering properties of Hornbeam wood in Veisar region [Volume 9, 9-No. 225, 2000, Pages 109-149]
HORNBEAM WOOD
COMPARATIVE INVESTIGATION ON FIBER DIMENSIONS OF TRUNK AND BRANCH WOOD OF CARPINUS BETULUS L. [Volume 19, No., 2, 2004-2005, Pages 243-254]
HORNBEAM WOOD
INVESTIGATION ON THE PROPERTIES OF MEDIUM DENSITY FIBERBOARDS FROM MIXTURE OF SAXAUL AND HORNBEAM WOOD [Volume 21, No., 1, 2006-2007, Pages 22-32]
HOT PRESS
The effect of Nano-wollastonite on bending properties and fire resistance characteristics of wood flour/polypropylene composite [Volume 31, Fall 3, 2016-2017, Pages 425-434]
HOT PRESS
Influence of fungal decay on durability and hardness strength characteristics of bagasse/PP composite [Volume 26, Issue 1, 2011-2012, Pages 173-192]
HOT PRESS
Study bhavior creep composites made mixes particle board and medium
density Fiber Board-Recycled from HDPE waste and effect water
fiber board absorption on Composites [Volume 24, Issue 2, 2009-2010, Pages 194-205]
HOT PRESS
MECHANICAL PROPERTIES OF WOOD-PLASTIC COMPOSITE MADE FROM PARTICLEBOARD AND MDF WASTES AND POLYETHYLENE (HDPE) WASTES [Volume 20, No., 2, 2005-2006, Pages 271-284]
HOT PRESS
THE EFFECT OF PRODUCING METHOD ON THE MECHANICAL PROPERTIES OF WOOD PLASTIC COMPOSITES MADE FROM PARTICLEBOARD WASTE [Volume 21, No., 1, 2006-2007, Pages 33-42]
Hot Water
The effect of hot water and alkaline pre-extractions on properties of bagasse pulps produced by monoethanolamine-AQ process [Volume 34, Issue 3, 2019-2020, Pages 409-423]
Household furniture
Identifying and ranking of factors affecting customer satisfaction of
the household wood furniture industry by Multi-Attribute Decision making method
(Case Study: home furniture) [Volume 28, Issue 4, 2013-2014, Pages 691-708]
Household wooden furniture
Consumer behaviors in the decision- making process of foreign and domestic household wooden furniture buying [Volume 34, Issue 2, 2019-2020, Pages 167-179]
Human Capital
Investigating the Status of Enterprise Entrepreneurship in Public and Private Companies Furniture [Volume 33, Issue 4, 2018-2019, Pages 522-530]
Hybrid Composite
Evaluation of effect of Nano SiO2 on the physical, mechanical and morphological properties of hybrid Nano composite from polypropylene-wood flour [Volume 30, Summer 2, 2015-2016, Pages 266-277]
Hydraulic conductivity
Inter-relations between tree-ring width and vessel features in black alder (Alnus glutinosa) [Volume 30, Summer 2, 2015-2016, Pages 278-288]
Hydrodynamic specific volume
Identification of Cellulosic Fiberfines Properties in Kraft, Chemical Mechanical, and Recycled Pulps [Volume 33, Issue 2, 2018-2019, Pages 231-243]
Hydrothermal treatment
Effect of hydrothermal treatment on the acoustic properties of wood from Walnut and Elm species, utilizable in musical instruments [Volume 29, WINTER 4, 2014-2015, Pages 636-647]
Hydro Thermo-Mechanical Treatment
Effect of press conditions on physical and mechanical properties of hydro thermo- mechanical treated poplar wood [Volume 36, Issue 3, 2021-2022, Pages 218-230]
Hydroxy benzoic acid
Biotechnology Application in Wood Industry: Utilization of Phenol
Oxidase Enzyme as a Renewable Binder in MDF Manufacture [Volume 27, Issue 2, 2012-2013, Pages 275-293]
Hydroxymethyl furfural
Control of Inhibitory factors in the Bio-refinery of bagasse pith [Volume 33, Issue 4, 2018-2019, Pages 553-563]
Hydroxypropyl methylcellulose
Preparation and characterization of the cellulose nanocrystal properties from recycled papers and its application as a reinforcement agent in the hydroxypropyl methyl cellulose/cationic starch nanocomposite for use in food packaging industries [Volume 36, Issue 3, 2021-2022, Pages 243-255]
Hygro-Thermal Modification
Evaluation of Physical and Mechanical Properties of Hygro-thermal Modified Wood [Volume 32, Issue 1, 2017-2018, Pages 1-12]
Hypothesis
Evaluation of the effective indexes on industrial buyer satisfaction in the supply chain of the home wooden furniture industry in Tehran province [Volume 30, Fall 3, 2015-2016, Pages 475-490]
I
IB
Evaluation of Mechanical Properties of Homogeneous and layering Particleboards by Ultrasonic Technique [Volume 30, Summer 2, 2015-2016, Pages 341-349]
IB
Investigation on the Effect of UF resin polymerization variable on strength of Uf bonded Hornbeam particleboard [Volume 1, Issue 148, 1995, Pages 1-53]
IB
THE EFFECT OF RESIN CONTENT AND PRESS TIME ON PROPERTIES OF MDF FROM BAGGASSE [Volume 18, No. 1, 2003-2004, Pages 77-88]
IB
INVESTIGATION ON POSSIBILITY OF MDF PRODUCTION FROM REED [Volume 19, No., 2, 2004-2005, Pages 225-242]
IB
THE EFFECT OF PRODUCTION VARIABLES ON MEDIUM DENSITY FIBERBOARD QUALITY MADE FROM TALABE -ANZALYE REED [Volume 20, No., 1, 2005-2006, Pages 1-22]
I-joist beam
Effect of web configuration and flange type on bending strength of I-joist beams [Volume 34, Issue 2, 2019-2020, Pages 263-275]
Image J
Inter-relations between tree-ring width and vessel features in black alder (Alnus glutinosa) [Volume 30, Summer 2, 2015-2016, Pages 278-288]
Immersion
Comparative study on antimicrobial property of cellulose-silver nanocomposite and cellulose film coved by Ag nanoparticles [Volume 31, Issue 4, 2016-2017, Pages 541-556]
IMPACT BENDING AND COMPRESSION PARALLEL TO GRAIN
THE EFFECT OF SPECIES AND LAYER THICKNESS ON LAMINATED VENEER LUMBER (L. V. L.) MECHANICAL PROPERTIES [Volume 19, No., 2, 2004-2005, Pages 211-224]
Impact resistance
Evaluation of composite properties made of sunflower stem flour and natural poly lactic acid (PLA) polymer [Volume 33, Issue 3, 2018-2019, Pages 391-401]
IMPACT STRENGHT
THE COMPARATIVE OF EFFECTS OF CELLULOSIC MATERIALS IN DIFFERENT LEVELS OF MAPP IN WOOD FIBER- FLOUR/ POLYPROPYLENE COMPOSITES [Volume 19, No., 1, 2004-2005, Pages 49-68]
Import of Paper Products
The Effect of Exchange Rate on the Imports of Paper Products in Iran [Volume 36, Issue 4, 2021-2022, Pages 356-367]
IMPREGNATION
Study on Fire-Retarding Properties of Nano-Wollastonite
in Fir Wood (Abies alba) [Volume 28, Summer 2, 2013-2014, Pages 252-265]
IMPREGNATION
Study on Durability of Oak Wood by Field test stakes [Volume 25, Issue 1, 2010-2011, Pages 22-31]
IMPREGNATION
Study on Termites Resistance of Oak Wood by Field test stakes [Volume 22, Issue 1, 2007-2008, Pages 62-72]
IMPREGNATION
INVESTIGATION ON DESIGN AND FABRICATION OF TWO HALF LAMINATED SLEEPERS IN COMPARION WITH CONVENTIONAL TYPE [Volume 12, 12-No. 251, 2000-2001, Pages 39-72]
IMPREGNATION
PRESERVATIVE TREATMENT OF GREEN POPLAR POLES BY USING TIRE -TUBE METHOD [Volume 19, No., 1, 2004-2005, Pages 97-114]
Index
Study of the effective indices on imports of Wooden furniture in Iran [Volume 28, Summer 2, 2013-2014, Pages 205-223]
Index
Identifying and ranking of factors affecting customer satisfaction of
the household wood furniture industry by Multi-Attribute Decision making method
(Case Study: home furniture) [Volume 28, Issue 4, 2013-2014, Pages 691-708]
Index
Survey the Situation of Furniture foreign trade, determine and prioritize the influencing indexes on export development
(Case Study: Household Furniture) [Volume 29, Summer 2, 2014-2015, Pages 299-309]
Index
Investigation of the domestic living furniture producer’s point of view on the way of manufacturing and selling of these products [Volume 31, Issue 4, 2016-2017, Pages 581-594]
Index
Determination of effective indexes on the purchase and selection of paper in Packaging Industry by Analytical Hierarchy Process (AHP) [Volume 33, Issue 4, 2018-2019, Pages 544-552]
Industral sawdust
Effects of Nano Cellulose and Nano Clay on Properties of Biodegradable Composites Made of Recycled Polymers and Industrial Saw Dust [Volume 34, Issue 3, 2019-2020, Pages 337-348]
Industrial wastewater
Modification of Nano-zeolite Clinoptilolite by iron oxide Magnetic Nanoparticles for green acid 20 Dye Removal from Aqueous Solution [Volume 36, Issue 2, 2021-2022, Pages 90-104]
Industrial wood chips
Evaluation the physical and mechanical properties of the boards manufactured by mixture of wheat straw and tobacco stalk [Volume 32, Issue 4, 2017-2018, Pages 576-584]
Industrial wooden fibers
Influence of nano metals oxide treatment on medium density fiberboard properties made of sunflower straw fibers [Volume 30, SPRING 1, 2015-2016, Pages 97-109]
Industry
Competitiveness model for laminate flooring industry with non-parametric tests [Volume 37, Issue 2, 2022-2023, Pages 177-192]
Inhibitors
Control of Inhibitory factors in the Bio-refinery of bagasse pith [Volume 33, Issue 4, 2018-2019, Pages 553-563]
Ink
Adhesion improvement of water-based flexographic inks on polyethylene coated paperboard by silane adhesion promoters [Volume 33, Issue 1, 2018-2019, Pages 76-87]
Innovation
The effect of marketing capabilities, innovation and learning ability of employees on the performance of wooden office furniture companies [(Articles in Press)]
Input-output table
Investigation the position of wood and paper industry in the economic sector in Iran by input-output approach [Volume 31, Issue 4, 2016-2017, Pages 634-647]
Intercalation structure
Investigation on The Effects of Nanoclay Particles on Mechanical
Properties of Wood Polymer Composites Made of High
Density Polyethylene-Wood Flour [Volume 25, Issue 1, 2010-2011, Pages 91-101]
INTERNAL BOND AND THICKNESS SWELLING
THE EFFECT OF MAT MOISTURE CONTENT GRADIENT ON PHYSICAL & MECHANICAL PROPERTIES OF PARTICLEBOARD [Volume 20, No., 1, 2005-2006, Pages 95-110]
Internal bonding
The effect of fiber external fibrillation on paper properties [Volume 28, SPRING 1, 2013-2014, Pages 1-10]
Internal bonding
The manufacture of particleboard using tannin-modified urea
formaldehyde adhesive [Volume 28, Summer 2, 2013-2014, Pages 266-276]
Internal bonding
The effect of boric acid on the physical and mechanical properties of particleboard made to Urea-formaldehyde resin (UF) [Volume 31, SPRING 1, 2016-2017, Pages 40-47]
Internal bonding
Evaluation the physical and mechanical properties of the boards manufactured by mixture of wheat straw and tobacco stalk [Volume 32, Issue 4, 2017-2018, Pages 576-584]
Internal bonding
The Investigation of Physical and Mechanical Properties of Oriented Strand Board (OSB) Production Using Corn Stalks Residues [Volume 33, Issue 2, 2018-2019, Pages 155-165]
Internal bonding
Investigation the possibility of particleboard manufacturing using Hemp stalk [Volume 33, Issue 1, 2018-2019, Pages 63-75]
Internal bonding
Use of unconventional water (rain) in urea-formaldehyde adhesive (Arian sina company case study) [Volume 33, Issue 2, 2018-2019, Pages 270-279]
Internal bonding
Investigation of applying the old corrugated container (OCC)
and aspen chips in particleboard production [Volume 26, Issue 1, 2011-2012, Pages 138-150]
Internal bonding
Effect of the presence of tobacco stalk wastes mixed with industrial wood particle on the dimensional stability and mechanical properties of particleboard [Volume 33, Issue 4, 2018-2019, Pages 564-578]
Internal bonding
Effect of nano gel wollastonite on physical, mechanical and morphological properties of bagasse-cement composites [Volume 34, Issue 3, 2019-2020, Pages 397-408]
Internal bonding
The Potential of utilizing corn cop in particleboard production [Volume 34, Issue 4, 2019-2020, Pages 461-474]
Internal bonding
Application of bagasse in composites nano-wollastonite-reinforced gypsum base structures [Volume 35, Issue 2, 2020-2021, Pages 138-151]
Internal bonding
Effect of density and industrial wood particles to cement ratio on mechanical and physical properties of wood cement composites [Volume 35, Issue 4, 2020-2021, Pages 362-375]
INTERNAL BONDING (IB)
Study on the effect of urea addition to urea-formaldehyde adhesive on physical and mechanical properties of poplar particleboard [Volume 27, WINTER 4, 2012-2013, Pages 649-654]
INTERNAL BONDING (IB)
INVESTIGATION ON THE PROPERTIES OF MEDIUM DENSITY FIBERBOARDS FROM MIXTURE OF SAXAUL AND HORNBEAM WOOD [Volume 21, No., 1, 2006-2007, Pages 22-32]
INTERNAL BOND STRENGTH
THE UTILIZATION OF BAGASSE AND LOGGING RESIDUES OF EUCALYPTUS FOR PARTICLEBOARD PRODUCTION [Volume 11, 11-No. 243, 2000-2001, Pages 1-60]
Internal bond strength (I.B)
Gypsum bounded board production reinfoced with Date Palm (Phoenix dactylifera L.) pruning residues fibers [Volume 30, SPRING 1, 2015-2016, Pages 60-71]
Interpretive Structural Modeling
Analysis of Barriers to Furniture Exporting in Iran Using Interpretative Structural Modeling (ISM) [Volume 34, Issue 2, 2019-2020, Pages 180-192]
INTERTEXTA
PROPERTIES OF EUCALYPTUS INTERTEXTA WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 12, 12-No. 251, 2000-2001, Pages 73-139]
IPBC
Improvement of the weathering resistance of wood /polyethylene composite using carbamate derivatives (IPBC) and Thiabendazole preservative materials [Volume 28, SPRING 1, 2013-2014, Pages 123-133]
Iran
Wood anatomy of an Iranian mangrove plant Avicennia marina (Forsk) Vierth [Volume 29, WINTER 4, 2014-2015, Pages 561-571]
Iran
Simultaneous estimation of demand and supply functions & production and consumption projection of corrugated board in Iran [Volume 26, Issue 2, 2011-2012, Pages 256-270]
Iran
PULP AND PAPER PROPERTIES OF EUCALYPTUS MICROTHECA GROWN IN SOUTHERN REGION OF IRAN [Volume 13, 13-No. 255, 2001, Pages 43-107]
Iran
AN INVESTIGATION ON DAMAGE OF AEOLESTHES SARTA SOLSKY ON INDUSTRIAL TIMBER IN IRAN [Volume 17, 17-No. 300, 2002-2003, Pages 73-95]
Iran
AN INTRODUCING TO IMPORTANT XYLOPHAGOUS PESTS (LONG HORN BEETLES) OF IRAN [Volume 20, No., 2, 2005-2006, Pages 207-236]
Isocyanat
The Effects of Acetylated Poplar Particles on Applicational Properties of manufactured Particleboards with Isocyanate Resin [Volume 24, Issue 1, 2009-2010, Pages 80-90]
Isocyanate
An analysis of the combined effects of isocyanate HMDI and maleic anhydride
(MAPE) coupling agents on the mechanical properties of HDPE- wood flour composite [Volume 28, Summer 2, 2013-2014, Pages 290-300]
Isocyanate
Investigation on the effect of acetylation and the resin type on the biological resistance of aspen tree layered particleboard [Volume 26, Issue 3, 2011-2012, Pages 466-476]
Isocyanate adhesive
Investigating of the effect of using bagasse and isocyanate adhesive on the 3-layer particleboard manufacturing [Volume 26, Issue 2, 2011-2012, Pages 300-313]
Isotherm of Adsorption
Application of Soybean Waste as Adsorbent of Remozol Black B from Aqueous Solution [Volume 37, Issue 4, 2022-2023, Pages 318-329]
J
Joint
The influence of reinforcement of polyvinyl acetate adhesive (PVAc) with carbon nanofiber (CNF) on the bending moment capacity of the corner joint of the furniture [Volume 34, Issue 2, 2019-2020, Pages 242-254]
Joint
The study of joints in Oak wood beam compared to the location of node and anti-node of longitudinal vibration [Volume 36, Issue 3, 2021-2022, Pages 256-263]
JUNIPER. JUNIPERUS EXELSA
JUNIPERUS EXELSA L.: WOOD STRUCTURE AND PHYSICAL PROPERTIES IN IRANO-TORANI REGION [Volume 15, 15-No. 278, 2001-2002, Pages 20-31]
Juniperus excelsa
The effect of erosion on anatomical characteristics of root and bark of Juniperus excelsa [Volume 27, WINTER 4, 2012-2013, Pages 529-583]
Juvenile wood
Investigation of the antomical, biometry and chemical characteristics
of juvenile and mature poplar (Populus alba) wood [Volume 28, SPRING 1, 2013-2014, Pages 182-193]
Juvenile wood
Evaluation of Anatomical and Physical Properties of Juvenile/Mature Wood of
Populus alba and Populus × euramericana [Volume 24, Issue 1, 2009-2010, Pages 134-147]
K
KAPA NO
INVESTIGATION ON SODA PULPING OF COTTON STALKS [Volume 20, No., 2, 2005-2006, Pages 185-206]
Kappa factor
The effect of kappa factor on chlorine dioxide bleaching sequence on the properties of dissolving pulp from recycled fibers (OCC) [Volume 37, Issue 1, 2022-2023, Pages 28-37]
Kappa factor
The effect of kappa factor changes in chlorine dioxide bleaching on the dissolution of pulp from OCC recycled fibers in sodium hydroxide / urea solvent [Volume 37, Issue 2, 2022-2023, Pages 166-176]
Kenaf bast
The effect of kenaf core and bast mixing on soda pulping
and paper strengths [Volume 28, Issue 4, 2013-2014, Pages 642-653]
Keywords
The possibility of utilization of soy straw powder in wood/plastic composites produced with polypropylene [Volume 30, Fall 3, 2015-2016, Pages 434-446]
Keywords: beech wood
Tensile and compressive load-bearing capacity of combined stresses investigated in connection with built-lingual Corner 45 ° Mobile [Volume 30, Summer 2, 2015-2016, Pages 308-319]
Key words: Black poplar wood
Effect of tree age, thickness and depth of black poplar timbers on color change and wettability of wood after accelerated weathering [Volume 38, Issue 2, 2023-2024, Pages 141-154]
Keywords: Bleaching
Investigation on TCF Bleaching of Tobacco stalk ( Nicotiana tabacum L.'Coker 347') Soda Pulp [Volume 29, WINTER 4, 2014-2015, Pages 623-632]
Keywords: color decoration
Study of mental and emotional reactions to decoration color Living and working environment.. [Volume 34, Issue 1, 2019-2020, Pages 134-139]
Keywords: Extrusion
Optimization of Coating Dimethoxydimethylsilane Using Plasma Enhanced Chemical Vapor Deposition (PECVD) on Coated Paper with Ethylene Vinyl Alcohol [Volume 34, Issue 1, 2019-2020, Pages 100-111]
Keywords: Grapevine Branches
Morphological Characteristics and Chemical Composition of Grapevine Branches (Vitis vinifera spp.) Grown in Astara [Volume 30, WINTER 4, 2015-2016, Pages 525-537]
Keywords: heterogeneous catalyst
Synthesis of a new heterogeneous acidic catalyst from Luffa as a lignocellulosic material [Volume 36, Issue 1, 2021-2022, Pages 64-77]
Key words: Hybrid nanocomposite
Effect of chemical modification of wood flour on properties of polypropylene-nano SiO2 hybrid nanocomposite [Volume 30, WINTER 4, 2015-2016, Pages 674-689]
Key words: Modeling
An Intelligent Neural Networks System for Prediction of particleboard properties [Volume 29, Summer 2, 2014-2015, Pages 242-253]
Key words: packaging
Effect of Coating on Paper made from bagasse soda pulp
with Biodegradable Polymer [Volume 31, Summer 2, 2016-2017, Pages 204-210]
Keywords: Particleboard
A mathematical model to predict particleboard properties using the
GMDH-type neural network and genetic algorithm [Volume 29, Fall 3, 2014-2015, Pages 376-389]
Keywords: Particleboard
Investigation on the Effect of Resin Gradient Consumption on Particleboard Properties Made Using Rose Flower Stalks Residues [Volume 32, Issue 2, 2017-2018, Pages 251-260]
Keywords: Particleboard
The Potential of Utilization of Cotton Stalk Residues In Particleboard Production [Volume 32, Issue 4, 2017-2018, Pages 462-472]
Keywords: Particle board
The Possibility of Utilization of Pistachio lignocellulosic residue in Particleboard Production [Volume 36, Issue 4, 2021-2022, Pages 329-339]
Keywords: safety
Assessing safety culture in the North of Iran wood and paper companies [Volume 29, SPRING 1, 2014-2015, Pages 156-169]
Keywords: Silk cocoon
urea formaldehyde resin reinforced by silk cocoon [Volume 31, Fall 3, 2016-2017, Pages 500-509]
Keywords: Sound absorption coefficient
Investigation of the sound absorption properties of gypsum particleboard
produced with kenaf stalks and nano clay [Volume 29, Fall 3, 2014-2015, Pages 434-442]
Keywords: sunflower stalk
The Effect of Nano-Wollastonite on Physical and Mechanical Properties of Wood Plastic Composites Made With Sunflower Stem Waste and Alder [Volume 31, Issue 4, 2016-2017, Pages 684-694]
Key words: sunflower stalks
Investigation on Effect of cement Types on the cement hydration and properties of wood-cement composites manufactured from sunflower stalk(Helianthus Annuus) [Volume 31, Summer 2, 2016-2017, Pages 336-348]
Keywords: Surface roughness
Influence of Hygrothermal Modification on Surface Characteristics and Failure Modes of Poplar Wood [Volume 36, Issue 2, 2021-2022, Pages 132-143]
Keywords: Urea formaldehyde adhesive
Use of unconventional water (rain) in urea-formaldehyde adhesive (Arian sina company case study) [Volume 33, Issue 2, 2018-2019, Pages 270-279]
Keywords: Wood–polymer composite
Investigation on the mechanical and decay resistance properties of wood modified with maleic anhydride and methyl metacrylate [Volume 30, Fall 3, 2015-2016, Pages 490-503]
Klason lignin
Investigation lignin dissolution at pulping process of wheat straw [Volume 25, Issue 2, 2010-2011, Pages 302-308]
KRAFT
Dielectric properties of oil impregnated kraft and soda pulps [Volume 28, Summer 2, 2013-2014, Pages 329-340]
KRAFT
THE COMPARISON ON PULPING OF P.AUSTRALIS [Volume 21, No., 1, 2006-2007, Pages 43-51]
KRAFT
INVESTIGATION OF PROPERTIES OF ETHANOL-ALKALI, KRAFT AND SODA PULPS PREPARED FROM WHEAT STRAW [Volume 21, No., 2, 2006-2007, Pages 105-114]
Kraft cooking
Comparative study of delignification efficiency and pulp yield of heart wood and sap wood of Populus deltoids by kraft and soda processes [Volume 25, Issue 1, 2010-2011, Pages 138-146]
Kraft lignin
Investigating the effect of methylation treatment on the kraft lignin optical behavior through simulation of lignin-containing papers [Volume 31, Fall 3, 2016-2017, Pages 410-424]
Kraft lignin
Use of kraft lignin as compatibilizer in wood flour-polypropylene
Composites [Volume 26, Issue 3, 2011-2012, Pages 454-465]
Kraft liner
Determination of optimum Refining of paper made of recovered Kraft liner [Volume 23, Issue 1, 2008-2009, Pages 12-19]
KRAFT PROCESS
Investigation the properties of radiata pine (pinus radiata)
wood kraft pulp and paper [Volume 28, Issue 4, 2013-2014, Pages 685-690]
KRAFT PROCESS
Comparison on the characteristics of Salix nigra Kraft and Soda pulp and paper [Volume 29, Summer 2, 2014-2015, Pages 324-334]
KRAFT PROCESS
Pulp and paper making features of Sequoia sempervirens wood [Volume 26, Issue 1, 2011-2012, Pages 83-97]
KRAFT PROCESS
Pulping and paper making properties of Populus costanzo [Volume 25, Issue 2, 2010-2011, Pages 157-169]
KRAFT PROCESS
INVESTIGATION ON DELIGNIFICATION AND PULPING OF SPRUCE (PICEA ABIES) [Volume 18, No. 2, 2003-2004, Pages 219-238]
KRAFT PROCESSI
Investigation of lignification and paper making characteristics of populus deltoids col. 77.51 grown under 3 rotation [Volume 16, 16-No. 293, 2002-2003, Pages 1-28]
Kraft pulp
Effect of bark content on physical and mechanical properties of the kraft pulp from chips Populus deltoids [Volume 29, WINTER 4, 2014-2015, Pages 503-514]
Kraft pulp
The Possibility of Using Kiwi Wood Residues for Kraft Pulp and Liner Paper Production [Volume 30, Fall 3, 2015-2016, Pages 408-418]
Kraft pulp
Depended pH behavior of chitosan on surface modified fibers of Kraft pulp [Volume 30, Fall 3, 2015-2016, Pages 513-524]
Kraft pulp
Effects of xylanase on optical properties of bagasse kraft pulp in
ECF bleaching [Volume 24, Issue 2, 2009-2010, Pages 295-306]
Kraft pulp
Effect of silver nanoparticles prepared by plasma method on properties of papers made from Kraft pulp [Volume 34, Issue 1, 2019-2020, Pages 76-88]
Kurdistan
Prioritize of poplar wood processing industries in the Kurdistan province with the aim of poplar wood value chain upgrading [Volume 32, Issue 2, 2017-2018, Pages 181-192]
L
LAMINATED VENEER LUMBER
Investigation on withdrawal capacity of staple in the upholstered furniture frame made of LVL [Volume 32, Issue 2, 2017-2018, Pages 171-180]
LAMINATED VENEER LUMBER
THE EFFECT OF SPECIES AND LAYER THICKNESS ON LAMINATED VENEER LUMBER (L. V. L.) MECHANICAL PROPERTIES [Volume 19, No., 2, 2004-2005, Pages 211-224]
Laminate Flooring
Competitiveness model for laminate flooring industry with non-parametric tests [Volume 37, Issue 2, 2022-2023, Pages 177-192]
Lateral load
Investigation on lateral load of joints made with various screws on
commercial wood-plastic composite [Volume 27, Issue 1, 2012-2013, Pages 100-113]
Lateral Shear Strength
Lateral holding strength of wooden dowel, screw and ready-to-assemble joints
(RTA joints) constructed of Medium Density Fiberboard (MDF) [Volume 24, Issue 2, 2009-2010, Pages 219-231]
Latif paper sludge
The effect of paper sludge , content and polymer types on the physical properties of wood- plastic composites [Volume 26, Issue 3, 2011-2012, Pages 486-494]
Layer by layer (LBL)
Hydrophobization of Paper Using Organosilane and Titanium Dioxide Nanoparticles with Layer by Layer Method [Volume 32, Issue 4, 2017-2018, Pages 530-540]
Layer-by-layer technique
The Effect of Cationic – Anionic Starch Multilayers Formation upon CMP Fibers on Pulp and Paper Properties [Volume 32, Issue 1, 2017-2018, Pages 57-68]
Leaching
The effects of wood extractive on the fixation and leaching of ACC
preservative in Beech (Fagus orientalis Lipsky) wood [Volume 28, SPRING 1, 2013-2014, Pages 62-71]
Leaching
Treatability of Beech and Pine Wood with Pyrolysis Acid Made from Different species of Wood [Volume 35, Issue 1, 2020-2021, Pages 88-101]
Learning
The effect of marketing capabilities, innovation and learning ability of employees on the performance of wooden office furniture companies [(Articles in Press)]
Lightweight cement blocks
Fabrication of cement blocks using rice husk ash and lignocellulosic fibers [Volume 28, Issue 3, 2013-2014, Pages 393-404]
Lightweight composite
Production and evaluation of lightweight particle board using expanded polyurethane foam [Volume 38, Issue 2, 2023-2024, Pages 87-99]
Light weighting
Production and evaluation of lightweight particle board using expanded polyurethane foam [Volume 38, Issue 2, 2023-2024, Pages 87-99]
Lightweight Particleboard
The effect ratio of adhesive urea formaldehyde melamine formaldehyde on the properties lightweight particleboard made from expanded polystyrene [Volume 29, WINTER 4, 2014-2015, Pages 626-635]
LIGNIFICATION
EFFECTS OF ENVIRONMENTAL FACTORS ON FORMATION OF LIGNIN IN EUCALYPTUS CAMALDULENSIS DEHN. GROWN IN KHOSESTAN-IRAN [Volume 18, No. 1, 2003-2004, Pages 1-38]
LIGNIN
The influence of fiber lignin content on mechanical properties of wood
fiber-polypropylene composites [Volume 29, SPRING 1, 2014-2015, Pages 1-11]
LIGNIN
Investigation on the effect of acetylation and reduction treatments on the chromophore groups of isolated lignin from unbleached hardwoods chemimecanical pulp using FT-IR spectroscopy [Volume 29, SPRING 1, 2014-2015, Pages 79-93]
LIGNIN
Simulation of condensing unit of liquor in Mazandaran wood and paper industry [Volume 32, Issue 4, 2017-2018, Pages 565-575]
LIGNIN
Qualitative Structural Characterization of Two Lignin Samples and Quantitative Determination of Hydroxyl and Methoxyl Functional Groups in Kraft Lignin via Acetylation [Volume 32, Issue 3, 2017-2018, Pages 369-381]
LIGNIN
The Effect of Chemical Pre-treatment of Industrial Waste of Licorice Root on its Pulp Structural Properties in Bio- Refinery Concept [Volume 32, Issue 4, 2017-2018, Pages 518-529]
LIGNIN
Comparative Investigation on the Anatomical,Chemical characteristics of E.camaldulensis From region jiroft [Volume 23, Issue 1, 2008-2009, Pages 83-90]
LIGNIN
Chemical structure elucidation of milled wood lignin and cellulytic lignin from Poplar [Volume 23, Issue 2, 2008-2009, Pages 102-122]
LIGNIN
PROPERTIES OF EUCALYPTUS STERIATICALYX WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 11, 11-No. 243, 2000-2001, Pages 61-123]
LIGNIN
PROPERTIES OF EUCALYPTUS INTERTEXTA WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 12, 12-No. 251, 2000-2001, Pages 73-139]
LIGNIN
PROPERTIES OF EUCALYPTUS MICROTHECA WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 13, 13-No. 255, 2001, Pages 43-106]
LIGNIN
INVESTIGATION ON DELIGNIFICATION AND PULPING OF SPRUCE (PICEA ABIES) [Volume 18, No. 2, 2003-2004, Pages 219-238]
LIGNIN
Use soda lignin and modify it with furfural as adhesive to make plywood [Volume 36, Issue 4, 2021-2022, Pages 293-304]
Lignocelluloses
Production and Characterization of Lignocellulosic Aerogel from Rice Straw [Volume 34, Issue 1, 2019-2020, Pages 124-133]
Likert spectrum
Study of the effective indices on imports of Wooden furniture in Iran [Volume 28, Summer 2, 2013-2014, Pages 205-223]
Liner and Flute Paper
Determination of effective indexes on the purchase and selection of paper in Packaging Industry by Analytical Hierarchy Process (AHP) [Volume 33, Issue 4, 2018-2019, Pages 544-552]
LIVE SAWING
SAWING PATTERN FOR POPLAR WOOD (POPULUS NIGRA) [Volume 20, No., 1, 2005-2006, Pages 23-46]
L joints
withdrawal strength and bending strangth of L -type of nail′s joint in particleboard and MDF joints. [Volume 27, WINTER 4, 2012-2013, Pages 676-689]
Load-displacement curve
Investigation of the effect of waste paper fibers on the fracture behavior of fiber-gypsum board [Volume 38, Issue 3, 2023-2024, Pages 193-204]
LONG HORN BEETLES
AN INTRODUCING TO IMPORTANT XYLOPHAGOUS PESTS (LONG HORN BEETLES) OF IRAN [Volume 20, No., 2, 2005-2006, Pages 207-236]
Longitudinal gas permeability
The effect of drying intensity and moisture content on longitudinal permeability of poplar tension and normal wood (populus nigra ) [Volume 26, Issue 3, 2011-2012, Pages 477-485]
Luffa
Synthesis of a new heterogeneous acidic catalyst from Luffa as a lignocellulosic material [Volume 36, Issue 1, 2021-2022, Pages 64-77]
Lumber
Investigation the causal relation of factors influencing on demand for
lumber imports in Iran [Volume 28, SPRING 1, 2013-2014, Pages 134-152]
LUMEN DIAMETER
INVESTIGATION ON TRACHIEDS CHARACTERISTICS OF PINUS TEADA [Volume 19, No., 1, 2004-2005, Pages 25-48]
M
MADM
Identifying and ranking of factors affecting customer satisfaction of
the household wood furniture industry by Multi-Attribute Decision making method
(Case Study: home furniture) [Volume 28, Issue 4, 2013-2014, Pages 691-708]
Magnesium di-hydroxide (MDH)
The effect of using flame retardant mineral fillers on physical and thermal properties of poly lactic acid-rice husk composite [Volume 36, Issue 2, 2021-2022, Pages 105-118]
Magnetic
Use of magnetic nano bio composites prepared from fibers, nanocrystalline cellulose and carboxy methylcellulose in adsorption of heavy metals )Nickel and Lead( [Volume 35, Issue 4, 2020-2021, Pages 332-347]
Magnetic Paper
The dual function of chitosan on improving the retention of iron oxide nanoparticles and the mechanical strength of magnetic paper produced by in situ synthesis [Volume 35, Issue 2, 2020-2021, Pages 205-217]
Magnetic Saturation
The dual function of chitosan on improving the retention of iron oxide nanoparticles and the mechanical strength of magnetic paper produced by in situ synthesis [Volume 35, Issue 2, 2020-2021, Pages 205-217]
MALAG
RELATIONSHIP BETWEEN WOOD EXTRACTIVES AND WOOD DECAY [Volume 18, No. 2, 2003-2004, Pages 139-154]
Management risk
Application of Delfi Method in Identification of Influential Factors on Risk Management Model for Wooden Structures [Volume 36, Issue 3, 2021-2022, Pages 194-204]
Mangrove
Wood anatomy of an Iranian mangrove plant Avicennia marina (Forsk) Vierth [Volume 29, WINTER 4, 2014-2015, Pages 561-571]
MAPE
Investigation physical properties and decay resistance of Medium Density Fiberboard sanding powder- polyethylene-nanoclay composite [Volume 29, Summer 2, 2014-2015, Pages 287-298]
MAPLE
Studying effect of accelerated aging on adhesion resistance of half polyester and polyurethane transparent coatings applied on maple and pine species [Volume 32, Issue 2, 2017-2018, Pages 205-214]
MAPLE
Investigation on Wood Plastic Composite Resistance against Water, Fire and Fungal attack Compared to Untreated Maple and Elm [Volume 22, Issue 2, 2007-2008, Pages 81-98]
MAPLE
INVESTIGATION ON LAMINATED WOOD (LB, LVL) MANUFACTURING [Volume 12, 12-No. 251, 2000-2001, Pages 1-38]
MAPP
The influence of fiber lignin content on mechanical properties of wood
fiber-polypropylene composites [Volume 29, SPRING 1, 2014-2015, Pages 1-11]
MAPP
Feasibility of utilizing polypropylene as a binder for plywood manufacture [Volume 24, Issue 1, 2009-2010, Pages 91-98]
MAPP
A Study on water absorption and thickness swelling behavior
of wood flour/glass fiber hybrid composites [Volume 24, Issue 2, 2009-2010, Pages 315-321]
MAPP
THE COMPARATIVE OF EFFECTS OF CELLULOSIC MATERIALS IN DIFFERENT LEVELS OF MAPP IN WOOD FIBER- FLOUR/ POLYPROPYLENE COMPOSITES [Volume 19, No., 1, 2004-2005, Pages 49-68]
MAPP. nanoclay
The influence of compounding process on the properties of polypropylene-cellulosic fiber nanocomposite containing nanoclay particles. [Volume 32, Issue 2, 2017-2018, Pages 287-299]
MAR
PROPERTIES OF EUCALYPTUS INTERTEXTA WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 12, 12-No. 251, 2000-2001, Pages 73-139]
MAR
THE EFFECT OF RESIN CONTENT AND PRESS TIME ON PROPERTIES OF MDF FROM BAGGASSE [Volume 18, No. 1, 2003-2004, Pages 77-88]
MARINE BORERS
FACTORS CAUSING ATTACK OF WOODEN VESSELS AND MARINE STRUCTURE IN COSTS OF IRAN [Volume 16, 16-No. 293, 2002-2003, Pages 59-72]
MARINE BORERS
THE EFFECT OF MARINE BORERS ATTACK ON SEVEN IRANIAN WOOD SPECIES IN BANDAR ABBAS COASTS [Volume 17, 17-No. 300, 2002-2003, Pages 57-72]
MARINE BORERS
RESISTANCE OF BEECH, OAK AND HORNBEAM WOOD SPECIES AGAINST MARINE BORERS IN BOSHEHR PORT COASTS IN PERSIAN GULF [Volume 18, No. 1, 2003-2004, Pages 63-76]
MARINE BORERS
DURABILITY OF 6 WOOD SPECIES AGAINST MARINE BORERS IN CHABAHAR PORT COASTS (OMAN SEA) [Volume 18, No. 2, 2003-2004, Pages 205-218]
MARINE BORERS
RESISTANCE OF SOME IRANIAN HARDWOODS AGAINST MARINE BORERS IN BOSHEHR PORT COAST (PERSIAN GULF) [Volume 19, No., 1, 2004-2005, Pages 115-131]
MARINE BORERS
RESISTANCE OF SOME IRANIAN HARDWOODS AGAINST MARINE BORERS IN MAHSHAHR (PERSIAN GULF), BANDAR TORKMAN AND NOSHAHR (CASPIAN SEA) COASTS [Volume 19, No., 2, 2004-2005, Pages 193-210]
Marketing
The effect of marketing capabilities, innovation and learning ability of employees on the performance of wooden office furniture companies [(Articles in Press)]
Market Structure
Analysis and investigation the structure of wooden bedroom furniture import market in Iran [Volume 37, Issue 1, 2022-2023, Pages 38-58]
Mass spectrometry
Identification and comparison of oil compounds derived from pyrolysis of sound wood and decayed wood of beech by using Gas Chromatography and Mass Spectrometry (GC/MS) [Volume 30, Summer 2, 2015-2016, Pages 243-255]
Mass spectrometry
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood and Bark of Oak by Atomic Adsorption and GC-MS Methods [Volume 32, Issue 2, 2017-2018, Pages 275-286]
Mass spectrometry
Study on the Possibility of Identification and Comparison of Chemical Components in Wood Alnus Subcordata and Alnus Glutinosa GC-MS Methods [Volume 33, Issue 1, 2018-2019, Pages 1-11]
Mass spectrometry
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood of Persuan maple and Caucasian maple tree by Atomic Absorption and GC-MS Methods [Volume 34, Issue 3, 2019-2020, Pages 361-371]
Mass spectrometry
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood and Bark of Mulberry tree by Atomic Absorption and GC-MS Methods [Volume 35, Issue 3, 2020-2021, Pages 283-293]
Mass spectrometry
Identification and Comparison of the Extractives Chemical Components in Wood and Bark of Planted sycamore Tree (Platanus orientalis) by GC-MS Methods [Volume 37, Issue 3, 2022-2023, Pages 229-238]
Mass spectrometry
Identification and Comparison of the Phenolic Chemical Components in Wood of Siberian elm, Common elm and Mountain elm trees by GC-MS Methods [Volume 38, Issue 3, 2023-2024, Pages 237-249]
MAT MOISTURE CONTENT GRADIENT
The pridiction of particleboard properties with regression models application in different condition production [Volume 23, Issue 1, 2008-2009, Pages 1-11]
MAT MOISTURE CONTENT GRADIENT
THE EFFECT OF MAT MOISTURE CONTENT GRADIENT ON PHYSICAL & MECHANICAL PROPERTIES OF PARTICLEBOARD [Volume 20, No., 1, 2005-2006, Pages 95-110]
Mature wood
Investigation of the antomical, biometry and chemical characteristics
of juvenile and mature poplar (Populus alba) wood [Volume 28, SPRING 1, 2013-2014, Pages 182-193]
Mature wood
Evaluation of Anatomical and Physical Properties of Juvenile/Mature Wood of
Populus alba and Populus × euramericana [Volume 24, Issue 1, 2009-2010, Pages 134-147]
Maximum strength
Comparing the mechanical strength of wooden chairs constructed using two patterns and mortise and tenon and dowel joints [Volume 29, SPRING 1, 2014-2015, Pages 67-78]
Maximum Temperature
Thermography as a non-Destructive method in evaluation of wood density for Oak and Beech [Volume 34, Issue 1, 2019-2020, Pages 89-99]
Mazandaran paper sludge
The effect of paper sludge , content and polymer types on the physical properties of wood- plastic composites [Volume 26, Issue 3, 2011-2012, Pages 486-494]
MC
RELATIONSHIP BETWEEN MOISTURE CONTENT AND ULTRASONIC WAVE SPEED DURING KILN DRYING OF BASSWOOD LUMBER [Volume 21, No., 1, 2006-2007, Pages 1-8]
MDF
The effect of old corrugated container (OCC) powder and as urea
formaldehyde adhesive filler on properties of medium density
fiberboard made from bagasse and waste MDF [Volume 29, Fall 3, 2014-2015, Pages 452-463]
MDF
withdrawal strength and bending strangth of L -type of nail′s joint in particleboard and MDF joints. [Volume 27, WINTER 4, 2012-2013, Pages 676-689]
MDF
Investigating the bending strength of wooden pin in
H-shaped joints in MDF [Volume 27, Issue 3, 2012-2013, Pages 423-433]
MDF
Effect of nanoclay on the properties of medium density
fiberboard (MDF) [Volume 26, Issue 4, 2011-2012, Pages 699-707]
MDF
THE EFFECT OF RESIN CONTENT AND PRESS TIME ON PROPERTIES OF MDF FROM BAGGASSE [Volume 18, No. 1, 2003-2004, Pages 77-88]
MDF
A STUDY ON THE LONG TERM WATER ABSORPTION AND THICKNESS SWELLING BEHAVIOR OF WOOD-PLASTIC COMPOSITE PANELS [Volume 20, No., 2, 2005-2006, Pages 255-270]
MDF
MECHANICAL PROPERTIES OF WOOD-PLASTIC COMPOSITE MADE FROM PARTICLEBOARD AND MDF WASTES AND POLYETHYLENE (HDPE) WASTES [Volume 20, No., 2, 2005-2006, Pages 271-284]
MDF
INVESTIGATION ON THE PROPERTIES OF MEDIUM DENSITY FIBERBOARDS FROM MIXTURE OF SAXAUL AND HORNBEAM WOOD [Volume 21, No., 1, 2006-2007, Pages 22-32]
MDF
THE EFFECT OF PRODUCING METHOD ON THE MECHANICAL PROPERTIES OF WOOD PLASTIC COMPOSITES MADE FROM PARTICLEBOARD WASTE [Volume 21, No., 1, 2006-2007, Pages 33-42]
MDF
Compression and tension strength properties of detachable joints in MDF and particleboard [Volume 34, Issue 2, 2019-2020, Pages 205-216]
MDF
Study of the effect of carbon nanofiber reinforced epoxy adhesive on the flexural moment capacity of corner joints in furniture [Volume 36, Issue 4, 2021-2022, Pages 305-316]
Mechanical and physical properties
The Study of Pulp-Polypropylene biocomposites Properties produced from non-extracted and pre-extracted Bagasse with hot water [Volume 31, SPRING 1, 2016-2017, Pages 78-91]
Mechanical properti
Effect of HeatTreatment with Modified Soybean Oil on Mechanical Properties of Beech [Volume 29, Summer 2, 2014-2015, Pages 208-219]
MECHANICAL PROPERTIES
Investigating the mechanical properties of wood
flour/ polypropylene/ nanoclay composite [Volume 28, SPRING 1, 2013-2014, Pages 153-168]
MECHANICAL PROPERTIES
The effect of paper mill recycling sludge application on the mechanical
properties of composites based on recycled polymers [Volume 28, Issue 3, 2013-2014, Pages 509-521]
MECHANICAL PROPERTIES
The effect of core type and skin on the mechanical properties
of lightweight sandwich Panels [Volume 28, Issue 4, 2013-2014, Pages 720-731]
MECHANICAL PROPERTIES
Comparative Investigation of the Effect of Pre and Post -Enzymatic Refining on OCC Pulp Properties [Volume 29, Summer 2, 2014-2015, Pages 254-265]
MECHANICAL PROPERTIES
Effect of Nano–Bentonite on Physical and Mechanical Properties Medium Density Fiberboard (MDF) [Volume 29, Summer 2, 2014-2015, Pages 266-274]
MECHANICAL PROPERTIES
Evaluation of Cu nano particles addition on the vertical density profile
and mechanical properties of medium density fiberboard (MDF) [Volume 29, Fall 3, 2014-2015, Pages 368-375]
MECHANICAL PROPERTIES
The influence of using waste PET on the mechanical and rheological
properties of wood flour filled PP composites [Volume 29, WINTER 4, 2014-2015, Pages 581-593]
MECHANICAL PROPERTIES
Investigating the Effect of Cotton Stalks Bark on Physical and Mechanical Properties of Cotton Stalk Flour- Polypropylene Composite [Volume 30, SPRING 1, 2015-2016, Pages 144-161]
MECHANICAL PROPERTIES
Investigation on Morphological and Mechanical Properties of Coupling Agents on Baggass Polypropylene Composites [Volume 30, SPRING 1, 2015-2016, Pages 85-96]
MECHANICAL PROPERTIES
Potential of Agricultural Residues Fibers and mineral material in Wood Plastics Composites Production [Volume 30, Summer 2, 2015-2016, Pages 220-229]
MECHANICAL PROPERTIES
Investigation of mechanical properties particleboard based on canola stalks and poplar wood by Response Surface Method (RSM) [Volume 30, Summer 2, 2015-2016, Pages 230-242]
MECHANICAL PROPERTIES
The Effect Type of Chemical Treatment of Wood Material on Physical, Mechanical and Morphological Properties of Wood Flour / Polypropylene Hybrid Composite [Volume 30, SPRING 1, 2015-2016, Pages 119-131]
MECHANICAL PROPERTIES
Improvement of dimensional stability and mechanical properties of gypsum particleboard by adding white cement [Volume 30, SPRING 1, 2015-2016, Pages 132-143]
MECHANICAL PROPERTIES
Investigation on the effect of cellulose fiber surface characteristics on mechanical properties of cellulose fiber /polypropylene composite [Volume 30, Summer 2, 2015-2016, Pages 183-193]
MECHANICAL PROPERTIES
Investigation on utilization The mechanical of Fish wastes (WF) in manufacturing of biodegradable wood plastic composites (WPCs) and high density polyethylene (HDPE) [Volume 30, Fall 3, 2015-2016, Pages 362-375]
MECHANICAL PROPERTIES
The possibility of utilization of soy straw powder in wood/plastic composites produced with polypropylene [Volume 30, Fall 3, 2015-2016, Pages 434-446]
MECHANICAL PROPERTIES
The Possibility of Using Kiwi Wood Residues for Kraft Pulp and Liner Paper Production [Volume 30, Fall 3, 2015-2016, Pages 408-418]
MECHANICAL PROPERTIES
Chemical Treatment of Rice Husk with Acetic Acid substitute for MAPE Compatibilizer in Rice Husk/High Density Poly Ethylene Composites [Volume 30, Fall 3, 2015-2016, Pages 443-456]
MECHANICAL PROPERTIES
Investigation on the mechanical and decay resistance properties of wood modified with maleic anhydride and methyl metacrylate [Volume 30, Fall 3, 2015-2016, Pages 490-503]
MECHANICAL PROPERTIES
Investigation on mechanical properties of HDPE recycled composite filled by furfural residue produced from bagasse [Volume 30, Fall 3, 2015-2016, Pages 376-387]
MECHANICAL PROPERTIES
Evaluating the addition of cellulose nano fibers to reinforce of high yield kraft pulp produced from P.deltoides clone 69-55 [Volume 30, WINTER 4, 2015-2016, Pages 606-617]
MECHANICAL PROPERTIES
Investigation of Properties of paper made from tensile wood and normal wood in Populus nigra [Volume 30, WINTER 4, 2015-2016, Pages 653-661]
MECHANICAL PROPERTIES
The Effect of Micro-Cellulose Length on Mechanical, Thermal and Morphological Properties in Nano/Wood Plastics Composites [Volume 31, SPRING 1, 2016-2017, Pages 154-165]
MECHANICAL PROPERTIES
Investigation on the Effect of Resin Gradient Consumption on Particleboard Properties Made Using Rose Flower Stalks Residues [Volume 32, Issue 2, 2017-2018, Pages 251-260]
MECHANICAL PROPERTIES
Effect of insitu synthesis of zinc oxide nanoparticles on the mechanical and biological properties of a wood-polymer composite [Volume 31, Issue 4, 2016-2017, Pages 566-576]
MECHANICAL PROPERTIES
Effects of the Combined Modification Process of Glutaraldehyde/ paraffin on Biological and Mechanical properties of Poplar wood [Volume 31, Issue 4, 2016-2017, Pages 606-620]
MECHANICAL PROPERTIES
Evaluation of Mechanical Properties of Old Corrugated Container Fibers – Polypropylene Composites Reinforced with Carbon Nanotubes (CNT) [Volume 32, Issue 1, 2017-2018, Pages 47-56]
MECHANICAL PROPERTIES
Investigation of Multi walled Carbon Nanotube and Microcrystalline Cellulose on Mechanical, and Morphological Properties Wood Plastics Composites [Volume 32, Issue 3, 2017-2018, Pages 334-344]
MECHANICAL PROPERTIES
Evaluating the Properties of Bleached Chemi-Mechanical Pulp (CMP) with One and Two-stage of Sodium Hypochlorite and Hydrogen Peroxide [Volume 33, Issue 2, 2018-2019, Pages 205-217]
MECHANICAL PROPERTIES
The Effect of Lignocellulosic Material and Nanoclay on Physical, Mechanical and Morphological Properties of Wood Plastic Composite [Volume 27, Issue 2, 2012-2013, Pages 189-201]
MECHANICAL PROPERTIES
Effects of fungal treatments on chemi-mechanical pulp and paper
properties from hornbeam wood [Volume 27, Issue 1, 2012-2013, Pages 1-15]
MECHANICAL PROPERTIES
Investigation on the physical and mechanical properties of waste newspaper deinked pulp by cellulase enzyme compared to conventional method [Volume 26, Issue 2, 2011-2012, Pages 243-255]
MECHANICAL PROPERTIES
Investigating of the effect of using bagasse and isocyanate adhesive on the 3-layer particleboard manufacturing [Volume 26, Issue 2, 2011-2012, Pages 300-313]
MECHANICAL PROPERTIES
Use of kraft lignin as compatibilizer in wood flour-polypropylene
Composites [Volume 26, Issue 3, 2011-2012, Pages 454-465]
MECHANICAL PROPERTIES
Prediction mechanical properties of particleboard and analysis the interaction effect of slenderness ratio and resin content, using linear, quadratic and exponential equation [Volume 26, Issue 3, 2011-2012, Pages 511-522]
MECHANICAL PROPERTIES
Evaluation of steam pretreatment of poplar wood particles on the mechanical and physical properties of particleboard [Volume 26, Issue 4, 2011-2012, Pages 785-797]
MECHANICAL PROPERTIES
Effect of Beech bark Content on Physical and Mechanical Properties
of Bark Flour-Polypropylene Composites [Volume 26, Issue 4, 2011-2012, Pages 811-823]
MECHANICAL PROPERTIES
Studying from the Properties of Chemi-Mechanical Pulping and Alkaline Peroxide Mechanical Pulping of Wheat Straw Golestan province [Volume 25, Issue 1, 2010-2011, Pages 32-47]
MECHANICAL PROPERTIES
Investigation on The Effects of Nanoclay Particles on Mechanical
Properties of Wood Polymer Composites Made of High
Density Polyethylene-Wood Flour [Volume 25, Issue 1, 2010-2011, Pages 91-101]
MECHANICAL PROPERTIES
Effect of fiber length on mechanical properties of wood composite plastic (Polypropylene) [Volume 25, Issue 2, 2010-2011, Pages 187-200]
MECHANICAL PROPERTIES
Effect of UF and MUF resins on the practical properties of particleboard produced
from rice straw and aspen particles [Volume 25, Issue 2, 2010-2011, Pages 321-331]
MECHANICAL PROPERTIES
Effect of cemical modification of lignocellulosics fiber on physical and
mechanical properties in MDF [Volume 24, Issue 2, 2009-2010, Pages 167-182]
MECHANICAL PROPERTIES
Effect of compatibilizer, MAPP, on physical and mechanical properties of
reed stem flour- polypropylene composites [Volume 24, Issue 2, 2009-2010, Pages 232-243]
MECHANICAL PROPERTIES
Studies On Mechanical and Morphological Proprties Of
Bagasse - Polypropylene Composite [Volume 23, Issue 2, 2008-2009, Pages 178-190]
MECHANICAL PROPERTIES
Effect of longitudinal compression to bulk cell wall on mechanical properties of steamed treated of beach wood [Volume 23, Issue 2, 2008-2009, Pages 191-199]
MECHANICAL PROPERTIES
Effect of Acetylation on Physical and Mechanical Properties of Prticleboard [Volume 22, Issue 1, 2007-2008, Pages 18-28]
MECHANICAL PROPERTIES
The effect of Bagasse characteristics fibers on MDF properties [Volume 16, 16-No. 293, 2002-2003, Pages 29-55]
MECHANICAL PROPERTIES
MECHANICAL PROPERTIES OF WOOD-PLASTIC COMPOSITE MADE FROM PARTICLEBOARD AND MDF WASTES AND POLYETHYLENE (HDPE) WASTES [Volume 20, No., 2, 2005-2006, Pages 271-284]
MECHANICAL PROPERTIES
THE EFFECT OF SIT CONDITION ON SOME MECHANICAL PROPERTIES OF PICEA ABIES WOOD IN TWO REGIONS [Volume 21, No., 1, 2006-2007, Pages 9-21]
MECHANICAL PROPERTIES
THE EFFECT OF PRODUCING METHOD ON THE MECHANICAL PROPERTIES OF WOOD PLASTIC COMPOSITES MADE FROM PARTICLEBOARD WASTE [Volume 21, No., 1, 2006-2007, Pages 33-42]
MECHANICAL PROPERTIES
Influence of Sheet Type, Layout, and Height of Cardboard Tubes as Cores on the Mechanical Properties of the Sandwich Panel [Volume 34, Issue 4, 2019-2020, Pages 563-571]
MECHANICAL PROPERTIES
Fire resistance and mechanical properties of nano-wollastonite/styrene-treated poplar wood [Volume 35, Issue 1, 2020-2021, Pages 46-60]
MECHANICAL PROPERTIES
Production wood plastic of polypropylene/ poplar wood flour and starch powder with improved mechanical and biodegradability properties [Volume 36, Issue 3, 2021-2022, Pages 182-193]
MECHANICAL PROPERTIES
The effect of starch sizing on the aesthetic and mechanical properties of historical papers [Volume 36, Issue 4, 2021-2022, Pages 394-403]
MECHANICAL PROPERTIES
Evaluation of sandwich panels from palm leaves waste and plywood [Volume 38, Issue 1, 2023-2024, Pages 48-58]
MECHANICAL PROPERTIES
Effect of Adding Several Graphite-Based Materials to Urea Formaldehyde Adhesive on Thermal and Mechanical Properties of MDF board [Volume 38, Issue 2, 2023-2024, Pages 100-113]
MECHANICAL PROPERTIES
Investigation of the effect of waste paper fibers on the fracture behavior of fiber-gypsum board [Volume 38, Issue 3, 2023-2024, Pages 193-204]
MECHANICAL PROPERTIES
Studying physical and mechanical properties of two Iranian walnut wood from Noor and Shahrkord regions [Volume 38, Issue 3, 2023-2024, Pages 215-224]
Mechanical Properties and surface roughness
Investigation on The Effect of Paraffin content, Press Time and temperature on Practical Properties Especially Surface Roughness of Particleboard [Volume 23, Issue 1, 2008-2009, Pages 50-62]
Mechanical strength
Evaluation of pulp properties produced from rice straw by combination the monoethanolamine and potassium hydroxide [Volume 30, SPRING 1, 2015-2016, Pages 46-59]
Mechanical strength
The Effect of Chitosan - Poly (vinyl alcohol) Coatings on Strength and Barrier Properties of Packaging Paper [Volume 30, Summer 2, 2015-2016, Pages 330-340]
Mechanical strength
Effect of thermal modification on the practical properties of horn beam bark flour-polypropylene composites [Volume 31, Summer 2, 2016-2017, Pages 280-293]
Mechanical strength
Densification of Paullownia wood by using of hot-press [Volume 23, Issue 2, 2008-2009, Pages 136-148]
MEDIUM DENSITY FIBERBOARD
Evaluating the quality of the medium density fiberboard made from kenaf
core and stalk [Volume 28, SPRING 1, 2013-2014, Pages 48-61]
MEDIUM DENSITY FIBERBOARD
Investigation on the properties of medium density fiberboard produced from rose flower residues [Volume 29, SPRING 1, 2014-2015, Pages 23-33]
MEDIUM DENSITY FIBERBOARD
Evaluation of Cu nano particles addition on the vertical density profile
and mechanical properties of medium density fiberboard (MDF) [Volume 29, Fall 3, 2014-2015, Pages 368-375]
MEDIUM DENSITY FIBERBOARD
MDF Production from Date Palm Pruning Residues in Pilot plant Scale [Volume 29, WINTER 4, 2014-2015, Pages 594-608]
MEDIUM DENSITY FIBERBOARD
Investigation of gluability and wettability properties of Medium Density Fiberboard produced using vine pruning fibers in combination with wood fibers [Volume 30, Summer 2, 2015-2016, Pages 289-298]
MEDIUM DENSITY FIBERBOARD
The Investigation of Press Temperature and Time on Properties of Medium Density Fiberboard Produced From Cotton Stalks Fibers [Volume 31, Summer 2, 2016-2017, Pages 194-203]
MEDIUM DENSITY FIBERBOARD
Investigating the properties of medium density fiberboard from
licorice root residues [Volume 27, Issue 3, 2012-2013, Pages 471-482]
MEDIUM DENSITY FIBERBOARD
Investigation on physical and mechanical properties of medium density
fiberboard produced from Eucalyptus steriaticalyx fibers [Volume 27, Issue 1, 2012-2013, Pages 89-99]
MEDIUM DENSITY FIBERBOARD
Effect of steaming time on medium density fiberboard properties produced from beech wood fibers [Volume 26, Issue 4, 2011-2012, Pages 667-681]
MEDIUM DENSITY FIBERBOARD
Investigation on Physical and Mechanical Properties of Medium Density Fiberboard Produced From Eucalyptus camaldulensis Fibers [Volume 25, Issue 1, 2010-2011, Pages 1-10]
MEDIUM DENSITY FIBERBOARD
The potential of utilization of alder wood fibers In medium density fiberboard production [Volume 26, Issue 1, 2011-2012, Pages 26-38]
MEDIUM DENSITY FIBERBOARD
The effect of press temperature and press time on Medium Density Fiberboard (MDF) properties produced from EucalyptusIntertexta fibers [Volume 24, Issue 1, 2009-2010, Pages 26-35]
MEDIUM DENSITY FIBERBOARD
Effect of cemical modification of lignocellulosics fiber on physical and
mechanical properties in MDF [Volume 24, Issue 2, 2009-2010, Pages 167-182]
MEDIUM DENSITY FIBERBOARD
Lateral holding strength of wooden dowel, screw and ready-to-assemble joints
(RTA joints) constructed of Medium Density Fiberboard (MDF) [Volume 24, Issue 2, 2009-2010, Pages 219-231]
MEDIUM DENSITY FIBERBOARD
The effect of steaming time and resin content on MDF made from canola straw [Volume 23, Issue 2, 2008-2009, Pages 149-156]
MEDIUM DENSITY FIBERBOARD
The effect of press time and resin content on properties of MDF produced
from Rice straw [Volume 22, Issue 1, 2007-2008, Pages 51-61]
MEDIUM DENSITY FIBERBOARD
The effect of Bagasse characteristics fibers on MDF properties [Volume 16, 16-No. 293, 2002-2003, Pages 29-55]
MEDIUM DENSITY FIBERBOARD
INVESTIGATION ON POSSIBILITY OF MDF PRODUCTION FROM REED [Volume 19, No., 2, 2004-2005, Pages 225-242]
MEDIUM DENSITY FIBERBOARD
THE EFFECT OF PRODUCTION VARIABLES ON MEDIUM DENSITY FIBERBOARD QUALITY MADE FROM TALABE -ANZALYE REED [Volume 20, No., 1, 2005-2006, Pages 1-22]
MEDIUM DENSITY FIBERBOARD
The influence of reinforcement of polyvinyl acetate adhesive (PVAc) with carbon nanofiber (CNF) on the bending moment capacity of the corner joint of the furniture [Volume 34, Issue 2, 2019-2020, Pages 242-254]
Medium density fiber board (MDF)
study on the cut load test, siding strength of two ready-to-assemble corner joints and comparing them with fixed joints [Volume 27, WINTER 4, 2012-2013, Pages 619-634]
Medium-density fiberboard (MDF)
Effect of Nano–Bentonite on Physical and Mechanical Properties Medium Density Fiberboard (MDF) [Volume 29, Summer 2, 2014-2015, Pages 266-274]
Medium-density fiberboard (MDF)
Study on the tensile and compression tension-carrying capacity of corner V-nails [Volume 31, Issue 4, 2016-2017, Pages 621-633]
MEDIUM DENSITY FIBERBOARD (MDF)
The influence of fiber chemical treatment on prevention of biologic
deterioration of medium density fiberboard (MDF) [Volume 29, Fall 3, 2014-2015, Pages 390-398]
MEDIUM DENSITY FIBERBOARD (MDF)
A STUDY ON DENSITY PROFILE OF THREE TYPES OF MEDIUM DENSITY FIBERBAORD (MDF) USED IN IRAN MARKET [Volume 20, No., 2, 2005-2006, Pages 285-301]
MEDIUM DENSITY FIBERBOARD (MDF)
Effect of Adding Several Graphite-Based Materials to Urea Formaldehyde Adhesive on Thermal and Mechanical Properties of MDF board [Volume 38, Issue 2, 2023-2024, Pages 100-113]
Medium paper
Investigation on the Effects of humidity and heat of combined papers on quality of CorrugatedBoard [Volume 25, Issue 2, 2010-2011, Pages 309-320]
Melamine coating
Investigation of antibacterial properties of melamine coatings containing chitosan and clay nanofibers [Volume 37, Issue 3, 2022-2023, Pages 239-250]
Melamine Formaldehyde
Investigation of mechanical properties particleboard based on canola stalks and poplar wood by Response Surface Method (RSM) [Volume 30, Summer 2, 2015-2016, Pages 230-242]
Melamine Formaldehyde
Effect of wheat straw surface treatment by using amino silane coupling agent on properties of amino plastic resin-bonded wheat straw particle boards [Volume 26, Issue 1, 2011-2012, Pages 128-137]
Melamine Formaldehyde
Evaluation of sandwich panels from palm leaves waste and plywood [Volume 38, Issue 1, 2023-2024, Pages 48-58]
Melamine formaldehyde resin
Making wheat straw particleboards by using mixture of MF and UF resins [Volume 25, Issue 2, 2010-2011, Pages 291-301]
Melamin urea formaldehyde
study on the possibility of particle board tree-layer manufacturing using of Cicer arietinum stem [Volume 28, Summer 2, 2013-2014, Pages 224-237]
Mercury porosimetry
Evaluation of the refining effects on the properties of transparent
paper produced from bagasse fiber [Volume 29, Fall 3, 2014-2015, Pages 484-492]
Metallic Ions
A Study on the Possibility of Extraction, Identification and Removal of Metallic Ions and Resins in Bleached Bagass Pulp by ECF Stages [Volume 30, SPRING 1, 2015-2016, Pages 72-84]
Metallic Ions
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood and Bark of Oak by Atomic Adsorption and GC-MS Methods [Volume 32, Issue 2, 2017-2018, Pages 275-286]
Metallic Ions
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood of Persuan maple and Caucasian maple tree by Atomic Absorption and GC-MS Methods [Volume 34, Issue 3, 2019-2020, Pages 361-371]
Metallic Ions
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood and Bark of Mulberry tree by Atomic Absorption and GC-MS Methods [Volume 35, Issue 3, 2020-2021, Pages 283-293]
Methylation reaction
Investigating the effect of methylation treatment on the kraft lignin optical behavior through simulation of lignin-containing papers [Volume 31, Fall 3, 2016-2017, Pages 410-424]
Methylene Blue dye
Improved adsorption performance of sawdust by ultrasonic wave: Optimization through response surface methodology, kinetic and thermodynamic studies [Volume 34, Issue 1, 2019-2020, Pages 12-26]
MIC
The minimum inhibitory concentration of Benomyl for four fungal species on historical papers [Volume 32, Issue 1, 2017-2018, Pages 131-144]
Micro- cellulose
The Effect of Micro-Cellulose Length on Mechanical, Thermal and Morphological Properties in Nano/Wood Plastics Composites [Volume 31, SPRING 1, 2016-2017, Pages 154-165]
Micro- cellulose
Investigation of Multi walled Carbon Nanotube and Microcrystalline Cellulose on Mechanical, and Morphological Properties Wood Plastics Composites [Volume 32, Issue 3, 2017-2018, Pages 334-344]
Micro-crystalline cellulose (MCC)
Preparation and Characterization of Micro (MCC) and Nano crystalline Cellulose (NCC) from Cotton Stem [Volume 30, Summer 2, 2015-2016, Pages 299-307]
Microencapsulation
Effects of free and microencapsulated biocides on characteristics of wood coatings and their mold growth resistance [Volume 34, Issue 1, 2019-2020, Pages 39-49]
Micronize gypsum
Improvement of dimensional stability and mechanical properties of gypsum particleboard by adding white cement [Volume 30, SPRING 1, 2015-2016, Pages 132-143]
Microscopic studies
Identification of staining fungi in imported Norway spruce lumber [Volume 29, SPRING 1, 2014-2015, Pages 44-56]
MICROTHECA
PROPERTIES OF EUCALYPTUS MICROTHECA WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 13, 13-No. 255, 2001, Pages 43-106]
Milling
Different CNC machining condition of paulownia wood by CNC;
Influence on the abbott roughness parameters [Volume 28, Summer 2, 2013-2014, Pages 301-312]
Mineral fibers
Effect of Cellulosic and Rockwool Fibres on Mechanical strengths and Ballistic Impact of Epoxy-bentonite NanoComposite [Volume 33, Issue 3, 2018-2019, Pages 347-358]
MOB
THE UTILIZATION OF BAGASSE AND LOGGING RESIDUES OF EUCALYPTUS FOR PARTICLEBOARD PRODUCTION [Volume 11, 11-No. 243, 2000-2001, Pages 1-60]
Mode I
Fracture Behavior of Beech-Furan Wood Polymer under Mode I [Volume 29, WINTER 4, 2014-2015, Pages 609-622]
Modification
Depended pH behavior of chitosan on surface modified fibers of Kraft pulp [Volume 30, Fall 3, 2015-2016, Pages 513-524]
Modified carbon nanofibre
The influence of reinforcement of polyvinyl acetate adhesive (PVAc) with carbon nanofiber (CNF) on the bending moment capacity of the corner joint of the furniture [Volume 34, Issue 2, 2019-2020, Pages 242-254]
Modulus of elasticity
study on the possibility of particle board tree-layer manufacturing using of Cicer arietinum stem [Volume 28, Summer 2, 2013-2014, Pages 224-237]
Modulus of elasticity
Shear and elastic moduli of Poplar wood affected by glue coverage deficiency of lamination in a vibration based nondestructive approach [Volume 29, WINTER 4, 2014-2015, Pages 550-560]
Modulus of elasticity
Investigation of relationship between dynamic modulus of elasticity and static bending properties in particleboard plates [Volume 32, Issue 2, 2017-2018, Pages 193-204]
Modulus of elasticity
Investigation of applying the old corrugated container (OCC)
and aspen chips in particleboard production [Volume 26, Issue 1, 2011-2012, Pages 138-150]
Modulus of elasticity
Flexural Properties of Wood-Plastic Composites Made From Lignocellulosic Fillers and Recycled High Density Polyethylene Manufactured Using a Dry Blend/Hot Press Method [Volume 22, Issue 2, 2007-2008, Pages 109-120]
Modulus of elasticity
INVESTIGATION ON LAMINATED WOOD (LB, LVL) MANUFACTURING [Volume 12, 12-No. 251, 2000-2001, Pages 1-38]
Modulus of elasticity
THE EFFECT OF SPECIES AND LAYER THICKNESS ON LAMINATED VENEER LUMBER (L. V. L.) MECHANICAL PROPERTIES [Volume 19, No., 2, 2004-2005, Pages 211-224]
Modulus of elasticity
A STUDY ON DENSITY PROFILE OF THREE TYPES OF MEDIUM DENSITY FIBERBAORD (MDF) USED IN IRAN MARKET [Volume 20, No., 2, 2005-2006, Pages 285-301]
Modulus of elasticity
Nondestructive evaluation of flexural strength comparing to static bending strength in wood from Pine and Beech [Volume 34, Issue 2, 2019-2020, Pages 157-166]
Modulus of elasticity
The effect of preheating in nitrogen medium on acoustic properties of walnut and white mulberry [Volume 34, Issue 3, 2019-2020, Pages 349-360]
Modulus of elasticity
Use soda lignin and modify it with furfural as adhesive to make plywood [Volume 36, Issue 4, 2021-2022, Pages 293-304]
MODULUS OF ELASTICITY (MOE)
The impact of reeds residue addition on physical and mechanical properties
of particleboard made from pomegranate prunings [Volume 27, Issue 1, 2012-2013, Pages 38-50]
MODULUS OF ELASTICITY (MOE)
INVESTIGATION ON THE PROPERTIES OF MEDIUM DENSITY FIBERBOARDS FROM MIXTURE OF SAXAUL AND HORNBEAM WOOD [Volume 21, No., 1, 2006-2007, Pages 22-32]
Modulus of Elastisity
The effect of using Palm Flour in the Manufacture of pp-based wood-plastic Composite [Volume 31, SPRING 1, 2016-2017, Pages 30-39]
Modulus of rupture
study on the possibility of particle board tree-layer manufacturing using of Cicer arietinum stem [Volume 28, Summer 2, 2013-2014, Pages 224-237]
Modulus of rupture
The Investigation of Physical and Mechanical Properties of Oriented Strand Board (OSB) Production Using Corn Stalks Residues [Volume 33, Issue 2, 2018-2019, Pages 155-165]
Modulus of rupture
Investigation of applying the old corrugated container (OCC)
and aspen chips in particleboard production [Volume 26, Issue 1, 2011-2012, Pages 138-150]
Modulus of rupture
Flexural Properties of Wood-Plastic Composites Made From Lignocellulosic Fillers and Recycled High Density Polyethylene Manufactured Using a Dry Blend/Hot Press Method [Volume 22, Issue 2, 2007-2008, Pages 109-120]
Modulus of rupture
INVESTIGATION ON LAMINATED WOOD (LB, LVL) MANUFACTURING [Volume 12, 12-No. 251, 2000-2001, Pages 1-38]
Modulus of rupture
Nondestructive evaluation of flexural strength comparing to static bending strength in wood from Pine and Beech [Volume 34, Issue 2, 2019-2020, Pages 157-166]
Modulus of rupture
Investigation of the effect of nano-wollastonite on the functional properties of gypsum-based composites made of rice straw [Volume 36, Issue 1, 2021-2022, Pages 14-25]
Modulus of rupture
Use soda lignin and modify it with furfural as adhesive to make plywood [Volume 36, Issue 4, 2021-2022, Pages 293-304]
Modulus of rupture
The effect of the bacteria of nano fiber cellulose on the functional properties of cementitious structures [Volume 37, Issue 4, 2022-2023, Pages 293-305]
MOE
Investigating the possibility of particleboard manufacture using corn
(zea mays) stalks [Volume 28, Issue 4, 2013-2014, Pages 608-627]
MOE
Evaluation of Mechanical Properties of Homogeneous and layering Particleboards by Ultrasonic Technique [Volume 30, Summer 2, 2015-2016, Pages 341-349]
MOE
Investigation on the Effect of UF resin polymerization variable on strength of Uf bonded Hornbeam particleboard [Volume 1, Issue 148, 1995, Pages 1-53]
MOE
Investigation on production of particleboard from Date palm residues [Volume 1, Issue 148, 1995, Pages 50-110]
MOE
PROPERTIES OF EUCALYPTUS STERIATICALYX WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 11, 11-No. 243, 2000-2001, Pages 61-123]
MOE
PROPERTIES OF EUCALYPTUS INTERTEXTA WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 12, 12-No. 251, 2000-2001, Pages 73-139]
MOE
PROPERTIES OF EUCALYPTUS MICROTHECA WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 13, 13-No. 255, 2001, Pages 43-106]
MOE
THE EFFECT OF RESIN CONTENT AND PRESS TIME ON PROPERTIES OF MDF FROM BAGGASSE [Volume 18, No. 1, 2003-2004, Pages 77-88]
Mofid hybrid populus
Investigating the use of wood-flour of hybrid populus (euphratica-alba) cultivar of “Mofid” in wood-plastic composite [Volume 36, Issue 3, 2021-2022, Pages 231-242]
Moisture
Nondestructive Evaluation of Effects of Moisture Content and Temperature on the Elastic Properties of Beech Wood Using Flexural Vibration Test [Volume 32, Issue 1, 2017-2018, Pages 13-24]
Moisture content
The influence of beech wood drying condition on its pH, buffering capacity and UF bond strength [Volume 29, Summer 2, 2014-2015, Pages 275-286]
Moisture content
Effect of Moisture Content and Cutting Speed on Shearing Properties of Four Almond Tree Varieties [Volume 31, Fall 3, 2016-2017, Pages 388-397]
Moisture content
Investigation on the properties of oriented strand boards (OSB) made from mixture ten- year- old poplar clones [Volume 31, Issue 4, 2016-2017, Pages 648-661]
Moisture content
Comparison of thermal energy production from wood biomass [Volume 34, Issue 3, 2019-2020, Pages 313-325]
Mold growth
Effects of free and microencapsulated biocides on characteristics of wood coatings and their mold growth resistance [Volume 34, Issue 1, 2019-2020, Pages 39-49]
Monetary policy
Investigating the Impact of Monetary Policy on Value Added Growth in Iran's Industrial Sub-Sectors (Positive Mathematical Programming Approach) with Emphasis on Wood industry sub-sector [Volume 34, Issue 4, 2019-2020, Pages 520-534]
Monopoly
Analysis and investigation the structure of wooden bedroom furniture import market in Iran [Volume 37, Issue 1, 2022-2023, Pages 38-58]
MOR
Investigating the possibility of particleboard manufacture using corn
(zea mays) stalks [Volume 28, Issue 4, 2013-2014, Pages 608-627]
MOR
Evaluation of Mechanical Properties of Homogeneous and layering Particleboards by Ultrasonic Technique [Volume 30, Summer 2, 2015-2016, Pages 341-349]
MOR
The potential of mesquite (somr) wood in particleboard production [Volume 27, Issue 1, 2012-2013, Pages 51-68]
MOR
Investigation on the Effect of UF resin polymerization variable on strength of Uf bonded Hornbeam particleboard [Volume 1, Issue 148, 1995, Pages 1-53]
MOR
Investigation on production of particleboard from Date palm residues [Volume 1, Issue 148, 1995, Pages 50-110]
MOR
THE UTILIZATION OF BAGASSE AND LOGGING RESIDUES OF EUCALYPTUS FOR PARTICLEBOARD PRODUCTION [Volume 11, 11-No. 243, 2000-2001, Pages 1-60]
MOR
PROPERTIES OF EUCALYPTUS STERIATICALYX WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 11, 11-No. 243, 2000-2001, Pages 61-123]
MOR
PROPERTIES OF EUCALYPTUS MICROTHECA WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 13, 13-No. 255, 2001, Pages 43-106]
MOR
INVESTIGATION ON POSSIBILITY OF MDF PRODUCTION FROM REED [Volume 19, No., 2, 2004-2005, Pages 225-242]
MOR
THE EFFECT OF PRODUCTION VARIABLES ON MEDIUM DENSITY FIBERBOARD QUALITY MADE FROM TALABE -ANZALYE REED [Volume 20, No., 1, 2005-2006, Pages 1-22]
MOR AND IB
INVESTIGATION ON THE POSSIBILITY OF PARTICLEBOARD PRODUCTION FROM HALOXYLON SP. AND WHEAT STRAW [Volume 17, 17-No. 300, 2002-2003, Pages 27-56]
Morphological characteristics
Morphological characteristics and chemical components of two corn varieties
(oilseed and 704) stalks cultivated in Astara [Volume 28, Issue 3, 2013-2014, Pages 561-582]
Morphological characteristics
Morphological Characteristics and Chemical Composition of Grapevine Branches (Vitis vinifera spp.) Grown in Astara [Volume 30, WINTER 4, 2015-2016, Pages 525-537]
Morphology
The Effect Type of Chemical Treatment of Wood Material on Physical, Mechanical and Morphological Properties of Wood Flour / Polypropylene Hybrid Composite [Volume 30, SPRING 1, 2015-2016, Pages 119-131]
Morphology
Effect of chemical modification of wood flour on properties of polypropylene-nano SiO2 hybrid nanocomposite [Volume 30, WINTER 4, 2015-2016, Pages 674-689]
Mortis and tenon joint
A Study of the Effects of height and Thickness of Tenon Made Out of Beech and Hornbeam on bending Strength of Mortise and tenon joint [Volume 25, Issue 1, 2010-2011, Pages 128-137]
Mountain elm
Identification and Comparison of the Phenolic Chemical Components in Wood of Siberian elm, Common elm and Mountain elm trees by GC-MS Methods [Volume 38, Issue 3, 2023-2024, Pages 237-249]
MOW
Applying Enzymatic treatment and Refining Sequence to Investigate Their Effect on Properties of Pulp and Paper Produced from Mixed Office Waste Paper [Volume 35, Issue 2, 2020-2021, Pages 195-204]
MUF
The effects of thermal treatment and resin type on physical and
mechanical properties of Kenaf stalk particleboard [Volume 28, Summer 2, 2013-2014, Pages 313-328]
MUF
Effect of UF and MUF resins on the practical properties of particleboard produced
from rice straw and aspen particles [Volume 25, Issue 2, 2010-2011, Pages 321-331]
MUF resin
The Effects of Some Production Variables on Physical and Mechanical Properties of Particleboard Made of Alnus subcordata by UF and MUF resin [Volume 25, Issue 2, 2010-2011, Pages 201-210]
Mulberry tree
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood and Bark of Mulberry tree by Atomic Absorption and GC-MS Methods [Volume 35, Issue 3, 2020-2021, Pages 283-293]
Multilayer Paperboard
Raw and Oxidized Starch Performance as Reinforcing Additives of Internal Bond in Recycled Multilayer Paperboards [Volume 35, Issue 1, 2020-2021, Pages 76-87]
Multi wall carbon nano tubes
Investigation on the impact of multi wall carbon nano tubes (MWCNT) addition on the mechanical properties, water absorption and thickness swelling of polypropylene/old corrugated container fibers composite [Volume 27, Issue 3, 2012-2013, Pages 522-535]
Multi walled Carbon Nanotube
Investigation of Multi walled Carbon Nanotube and Microcrystalline Cellulose on Mechanical, and Morphological Properties Wood Plastics Composites [Volume 32, Issue 3, 2017-2018, Pages 334-344]
Music
Effect of fermentation pretreatment and extraction on the acoustic properties of Ash wood (Fraxinus excelsior) [Volume 39, Issue 1, 2024-2025, Pages 27-40]
Musical instruments
Effect of hydrothermal treatment on the acoustic properties of wood from Walnut and Elm species, utilizable in musical instruments [Volume 29, WINTER 4, 2014-2015, Pages 636-647]
MWCNT
Evaluation of Mechanical Properties of Old Corrugated Container Fibers – Polypropylene Composites Reinforced with Carbon Nanotubes (CNT) [Volume 32, Issue 1, 2017-2018, Pages 47-56]
MWL
Analysis of photodegraded lignin from hardwood
bleached chemimechanical pulp by 13C-NMR [Volume 24, Issue 2, 2009-2010, Pages 254-263]
N
Nano
Production of plastic wood nanocomposites using agricultural waste and urban polymer waste [Volume 35, Issue 4, 2020-2021, Pages 392-406]
Nano Adhesive
Compression and tension strength properties of detachable joints in MDF and particleboard [Volume 34, Issue 2, 2019-2020, Pages 205-216]
Nano alumina
The Effect of alumina nanoparticles on adhesion strength of clear varnishes applied on walnut and spruce wood [Volume 37, Issue 4, 2022-2023, Pages 271-281]
Nanobentonite
Comparing the Effect of Silica Sol and Bentonite Nanoparticles on the Performance of Cationic Starch for Drainability, Retention and Strength Properties of Recycled Paper [Volume 32, Issue 2, 2017-2018, Pages 227-237]
Nano-Bentonite
Effect of Nano–Bentonite on Physical and Mechanical Properties Medium Density Fiberboard (MDF) [Volume 29, Summer 2, 2014-2015, Pages 266-274]
Nano-Bentonite
Effect of cationic poly acrylamide - nano bentonite system on retention,
drainage and properties of recycled paper from OCC [Volume 29, Fall 3, 2014-2015, Pages 474-483]
Nanocellulose
Effect of using PCC fillers and nanocellulose on pulp and paper properties [Volume 33, Issue 1, 2018-2019, Pages 12-24]
Nanocellulose
Investigating the effect of butanediol diglycidyl ether on the crosslinking of nanocellulose [Volume 33, Issue 2, 2018-2019, Pages 300-310]
Nano cellulose
Effect of Nano-fibrillated Cellulose and Chitosan Bio-polymeric System on the Optical and Mechanical Properties of Chemi-mechanical Pulp(CMP) [Volume 35, Issue 1, 2020-2021, Pages 61-75]
Nano-cellulose
Preparation of nano-cellulose from cladophora, a fibrous algae, utilizing it at improving the strength properties of CMP pulp. [Volume 31, Issue 4, 2016-2017, Pages 695-702]
Nano-cellulose
The Effect of nano-Chitosan, nano-Cellulose and DTPA Spray on the Optical Properties of Paper Obtained from Chemical-mechanical Pulp (CMP) [Volume 39, Issue 1, 2024-2025, Pages 55-71]
Nanocellulose fiber
Investigation on possibility of making a Nano composite consist of Pebax and Nano cellulose [Volume 31, SPRING 1, 2016-2017, Pages 92-104]
Nano-Chitosan
Effect of Polyalumium Chloride and Nano-Chitosan Bio-polymeric System on the Optical and Mechanical Properties of Chemi-mechanical Pulp (CMP) [Volume 36, Issue 4, 2021-2022, Pages 368-381]
Nano-Chitosan
The Effect of nano-Chitosan, nano-Cellulose and DTPA Spray on the Optical Properties of Paper Obtained from Chemical-mechanical Pulp (CMP) [Volume 39, Issue 1, 2024-2025, Pages 55-71]
Nanoclay
The manufacture of particleboard using mixture of golestan province wheat straw
and cotton bolls reinforced with nano-clay particles [Volume 28, Summer 2, 2013-2014, Pages 277-289]
Nanoclay
Investigating the mechanical properties of wood
flour/ polypropylene/ nanoclay composite [Volume 28, SPRING 1, 2013-2014, Pages 153-168]
Nanoclay
Physico-mechanical and morphological properties
of nanocomposite made from Canola stalk [Volume 28, Issue 4, 2013-2014, Pages 742-754]
Nanoclay
Investigation physical properties and decay resistance of Medium Density Fiberboard sanding powder- polyethylene-nanoclay composite [Volume 29, Summer 2, 2014-2015, Pages 287-298]
Nanoclay
The Effect of Micro-Cellulose Length on Mechanical, Thermal and Morphological Properties in Nano/Wood Plastics Composites [Volume 31, SPRING 1, 2016-2017, Pages 154-165]
Nanoclay
The Influence of Nanoclay on the Performance of HDPE/ Wheat Straw Powder Composite Produced by Two Stage Mixing Process [Volume 27, WINTER 4, 2012-2013, Pages 635-645]
Nanoclay
The impact of nanoclay on the performance of polypropylene/OCC fibers/nanoclay composite [Volume 27, Issue 3, 2012-2013, Pages 373-385]
Nanoclay
The Effect of Lignocellulosic Material and Nanoclay on Physical, Mechanical and Morphological Properties of Wood Plastic Composite [Volume 27, Issue 2, 2012-2013, Pages 189-201]
Nanoclay
Investigation on the effect of nanoclay on physical and tensile properties of nanocomposite made from reed residues [Volume 27, Issue 2, 2012-2013, Pages 202-211]
Nanoclay
Thermal properties and X-ray diffraction of wood plastic nanocomposite (effect of coupling agent and nanoclay content) [Volume 26, Issue 1, 2011-2012, Pages 151-160]
Nanoclay
Effect of nanoclay on the properties of medium density
fiberboard (MDF) [Volume 26, Issue 4, 2011-2012, Pages 699-707]
Nanoclay
Investigation on The Effects of Nanoclay Particles on Mechanical
Properties of Wood Polymer Composites Made of High
Density Polyethylene-Wood Flour [Volume 25, Issue 1, 2010-2011, Pages 91-101]
Nano clay
Investigation of the sound absorption properties of gypsum particleboard
produced with kenaf stalks and nano clay [Volume 29, Fall 3, 2014-2015, Pages 434-442]
Nano clay
Effects of Nano Cellulose and Nano Clay on Properties of Biodegradable Composites Made of Recycled Polymers and Industrial Saw Dust [Volume 34, Issue 3, 2019-2020, Pages 337-348]
Nano composite
Comparative study on antimicrobial property of cellulose-silver nanocomposite and cellulose film coved by Ag nanoparticles [Volume 31, Issue 4, 2016-2017, Pages 541-556]
Nanocomposite film
Production and investigation of cellulose nanocrystals properties obtained from cotton linter and their use as a reinforcing agent in polycaprolactone nanocomposite films [Volume 38, Issue 3, 2023-2024, Pages 225-236]
Nano-composite/ hybrid coating
Fabrication of Durable, Super-hydrophobic and Self-cleaning Wood Surfaces Based on Silica-Carnauba Wax, Nano-hybrid coating into Epoxy resin matrix [Volume 38, Issue 4, 2023-2024, Pages 281-295]
Nanocomposites
Preparation and Characterization of Electrospun Nanofiber of Poly (Vinyl Alcohol) and Cellulose Nanocrystals [Volume 33, Issue 3, 2018-2019, Pages 438-452]
Nanocrystal cellulose
Use of magnetic nano bio composites prepared from fibers, nanocrystalline cellulose and carboxy methylcellulose in adsorption of heavy metals )Nickel and Lead( [Volume 35, Issue 4, 2020-2021, Pages 332-347]
Nanocrystalline Cellulose
Investigation of mechanical and optical properties of papers coated with Polycaprolactone - Nanocrystalline cellulose - zinc oxide Nanoparticle [Volume 34, Issue 1, 2019-2020, Pages 27-38]
Nanocrystalline Cellulose
Preparation and characterization of the cellulose nanocrystal properties from recycled papers and its application as a reinforcement agent in the hydroxypropyl methyl cellulose/cationic starch nanocomposite for use in food packaging industries [Volume 36, Issue 3, 2021-2022, Pages 243-255]
Nano crystalline cellulose (NCC)
Preparation and Characterization of Micro (MCC) and Nano crystalline Cellulose (NCC) from Cotton Stem [Volume 30, Summer 2, 2015-2016, Pages 299-307]
Nanofibers
Preparation and Characterization of Electrospun Nanofiber of Poly (Vinyl Alcohol) and Cellulose Nanocrystals [Volume 33, Issue 3, 2018-2019, Pages 438-452]
Nano Fibrillated cellulose
Studying the Effect of Pulp Refining and Paper Pressing in Using Nano Fibrillated Cellulose to Improve the CMP Pulp Properties [Volume 31, Summer 2, 2016-2017, Pages 224-236]
Nano Fibrillated cellulose
Comparative study on antimicrobial property of cellulose-silver nanocomposite and cellulose film coved by Ag nanoparticles [Volume 31, Issue 4, 2016-2017, Pages 541-556]
Nano gel wollastonite
Investigation on effect of nano gel wollastonite on properties usage of wood-cement composites manufactured from rice straw fibers [Volume 33, Issue 3, 2018-2019, Pages 453-465]
Nano Magnetite
The dual function of chitosan on improving the retention of iron oxide nanoparticles and the mechanical strength of magnetic paper produced by in situ synthesis [Volume 35, Issue 2, 2020-2021, Pages 205-217]
Nano materilas
Production and Characterization of Lignocellulosic Aerogel from Rice Straw [Volume 34, Issue 1, 2019-2020, Pages 124-133]
Nano silica
Calcium silicate formation using of Nano-silica and wood flour calcareous-treated and investigating of properties of the wood plastic composite obtained from it [Volume 31, Fall 3, 2016-2017, Pages 486-499]
Nano silica
Adhesive Modification and Improvement of Properties of Polyvinyl Acetate Using Nano silica [Volume 38, Issue 2, 2023-2024, Pages 128-140]
Nano silicon dioxide
Evaluation of physical and mechanical properties of Nanocomposites made of polyvinyl alcohol - Nanofiber cellulose and Nano silicon dioxide [Volume 36, Issue 1, 2021-2022, Pages 78-89]
Nanosilver
Comparative study on antimicrobial property of cellulose-silver nanocomposite and cellulose film coved by Ag nanoparticles [Volume 31, Issue 4, 2016-2017, Pages 541-556]
Nano SiO2
Effect of chemical modification of wood flour on properties of polypropylene-nano SiO2 hybrid nanocomposite [Volume 30, WINTER 4, 2015-2016, Pages 674-689]
Nanotechnology
Optimum Production of Cellulose NanoCrystal from Cotton Stalk under Acidic Hydrolysis Condition [Volume 30, SPRING 1, 2015-2016, Pages 1-13]
Nano Tio2
Effect of Nano TiO2 on Properties of Old Corrugated Paper Recycling Waste Water [Volume 29, WINTER 4, 2014-2015, Pages 526-237]
Nano wollastonite
Effect of nano-wollastonite, poly vinyl chloride and heavy polyethylene polymers and board structure on fire resistance of particleboard made of pepper stalk and industrial wood [Volume 30, Fall 3, 2015-2016, Pages 503-512]
Nano wollastonite
The effect of nano wollastonite on the fire resistance and the adhesion properties of water based acrylic coating in wood surface [Volume 33, Issue 2, 2018-2019, Pages 166-178]
Nano wollastonite
Fire resistance and mechanical properties of nano-wollastonite/styrene-treated poplar wood [Volume 35, Issue 1, 2020-2021, Pages 46-60]
Nanozeolite Cliniptilolite
Modification of Nano-zeolite Clinoptilolite by iron oxide Magnetic Nanoparticles for green acid 20 Dye Removal from Aqueous Solution [Volume 36, Issue 2, 2021-2022, Pages 90-104]
Nano-zinc oxide
A study on the protective effect of nano zinc oxide against weathering of wood-polypropylene composite [Volume 37, Issue 1, 2022-2023, Pages 17-27]
Native Starch
Raw and Oxidized Starch Performance as Reinforcing Additives of Internal Bond in Recycled Multilayer Paperboards [Volume 35, Issue 1, 2020-2021, Pages 76-87]
Natural durability
Evaluating the durability of particleboard made from steam pretreated poplar
wood particles against of Polyporus versicolor [Volume 29, Fall 3, 2014-2015, Pages 493-501]
Natural-fiber composite
The possibility of utilization of soy straw powder in wood/plastic composites produced with polypropylene [Volume 30, Fall 3, 2015-2016, Pages 434-446]
Natural fibers
Increasing the flexural strength capacity of cement composite
with natural fibres [Volume 24, Issue 2, 2009-2010, Pages 206-218]
Natural Poly lactic acid polymer
Evaluation of composite properties made of sunflower stem flour and natural poly lactic acid (PLA) polymer [Volume 33, Issue 3, 2018-2019, Pages 391-401]
Natural resistance
Effect of silica dioxide on natural resistance and morphological study of wood plastic composite against of white rot fungi (Trametes Versicolor) [Volume 31, SPRING 1, 2016-2017, Pages 14-29]
Natural weathering
The effects of natural weathering on different properties of paper made in Pars factory [Volume 32, Issue 4, 2017-2018, Pages 509-517]
Neutral Papermaking
Sizing Mechanism of Recycled Test Liner Using Poly Aluminum Chloride and Rosin under Neutral Condition [Volume 23, Issue 1, 2008-2009, Pages 40-49]
Neutral Sulfite Semi Chemical
Effect of anthraquinone on NSSC pupling of P.deltoides [Volume 26, Issue 4, 2011-2012, Pages 622-633]
Neutral Sulfite Semi Chemical
Investigation on Neutral Sulfite Semi-Chemical Pulping of Reapseed (Canola) Residues [Volume 25, Issue 1, 2010-2011, Pages 113-127]
Neutral Sulfite Semi-chemical Pulp
Effect of Cationic Starch- CMC Self-assembly Layers on Recovered Fibers of Neutral Sulfite Semi-chemical Pulp and Resultant Paper Properties [Volume 33, Issue 1, 2018-2019, Pages 25-37]
Neutral Sulfite Semi Chemical pulp
Effect of alkaline pre-treatment on physical, optical and mechanical properties
of semi-chemical NSSC wheat straw pulp [Volume 28, Summer 2, 2013-2014, Pages 366-380]
Neutral Sulfite Semi Chemical pulp
Comparison of hot water and alkaline pre-treatments on the properties
of wheat straw NSSC pulp [Volume 28, Issue 4, 2013-2014, Pages 774-794]
Neutral Sulfite Semi Chemical pulp
Effect of boiling water pre-treatment on the yield, physical, optical and mechanical properties of neutral sulfite semi chemical pulp from wheat straw [Volume 29, Fall 3, 2014-2015, Pages 422-433]
New method approach
A new approach to dendroecological studies: Climate change impact on forest’ wood production in Astara (Gilan) [Volume 27, WINTER 4, 2012-2013, Pages 690-706]
Newsprint paper
The Study of Fiber Fines and Its Effects On Optical and Physical Propertie of Newsprint Paper from CMP Pulp [Volume 22, Issue 1, 2007-2008, Pages 29-40]
NFC
Investigation of the independent and combined effect of different additives on the properties of liner and fluting paper made from OCC [Volume 37, Issue 3, 2022-2023, Pages 204-216]
Non-destructive
Investigation of relationship between dynamic modulus of elasticity and static bending properties in particleboard plates [Volume 32, Issue 2, 2017-2018, Pages 193-204]
Nondestructive test
Evaluation of Mechanical Properties of Homogeneous and layering Particleboards by Ultrasonic Technique [Volume 30, Summer 2, 2015-2016, Pages 341-349]
Nondestructive test
Possibility of using non-destructive spectrophotometery to detect the poplar tension
wood and spruce compression wood in freshly cut and dried timbers [Volume 27, WINTER 4, 2012-2013, Pages 568-753]
Non-destructive testing
Assessment of decay in poplar and beech by using of x-ray non-destructive method [Volume 33, Issue 1, 2018-2019, Pages 112-121]
Non-destructive testing
Thermography as a non-Destructive method in evaluation of wood density for Oak and Beech [Volume 34, Issue 1, 2019-2020, Pages 89-99]
Non-destructive testing
Evaluation of the internal defaults and decay in old timber in building using non-destructive ground penetration radar (GPR) method [Volume 37, Issue 3, 2022-2023, Pages 217-228]
Nonoclay
Effect of nanoclay on mechanical properties of HDPE/wheat straw composite [Volume 27, WINTER 4, 2012-2013, Pages 595-605]
Non-wood fibers
Preparation of Bleached Soda Pulp from Canola Stalks [Volume 25, Issue 1, 2010-2011, Pages 80-90]
Normalization Equation
The Influence of Alkalinity in Oxygen Delignification of Soda/AQ Pulp From
Old Corrugated Container [Volume 26, Issue 2, 2011-2012, Pages 232-242]
Normalization Equation
Study on the mechanical and optical properties of kraft liner paper produced
from mixing of OCC and virgin hardwoods kraft pulp [Volume 24, Issue 2, 2009-2010, Pages 264-274]
NSSC
THE COMPARISON ON PULPING OF P.AUSTRALIS [Volume 21, No., 1, 2006-2007, Pages 43-51]
NSSC
Effect of Alkali Oxidation of fiber on characteristic of virgin and recycled pulp [Volume 38, Issue 4, 2023-2024, Pages 316-329]
NSSC pulp
Comparison of the NSSC pulp characteristics from Mazandaran wood and
paper mill and rapeseed straw NSSC pulp [Volume 27, Issue 2, 2012-2013, Pages 326-337]
NSSC pulp
The effect of using bulking agents on the physical and strength properties of the medium corrugated board made by NSSC and OCC [Volume 37, Issue 3, 2022-2023, Pages 193-203]
N-tert butyl carbamate
Synthesis of a new heterogeneous acidic catalyst from Luffa as a lignocellulosic material [Volume 36, Issue 1, 2021-2022, Pages 64-77]
Nutrients
Investigation on the influence of nutrients and treatment period on enzyme activities of Phanerochaete chrysosporium [Volume 25, Issue 2, 2010-2011, Pages 275-290]
O
Oak
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood and Bark of Oak by Atomic Adsorption and GC-MS Methods [Volume 32, Issue 2, 2017-2018, Pages 275-286]
Oak
A new approach to dendroecological studies: Climate change impact on forest’ wood production in Astara (Gilan) [Volume 27, WINTER 4, 2012-2013, Pages 690-706]
Oak
Climate and environmental impacts on beech and oak wood
production in the Hyrcanian forests [Volume 27, Issue 3, 2012-2013, Pages 386-408]
Oak
Climate and environmental impacts on beech and oak wood
production in the Hyrcanian forests [Volume 30, Fall 3, 2015-2016, Pages 386-408]
Oak
Study on Durability of Oak Wood by Field test stakes [Volume 25, Issue 1, 2010-2011, Pages 22-31]
Oak
Variation in Mechanical properties of oak
(Quercus castanefolia C.A.Mey) wood grown of Shafarod Forests (Gilan), Iran [Volume 22, Issue 1, 2007-2008, Pages 41-50]
Oak
Study on Termites Resistance of Oak Wood by Field test stakes [Volume 22, Issue 1, 2007-2008, Pages 62-72]
Oak
DURABILITY OF 6 WOOD SPECIES AGAINST MARINE BORERS IN CHABAHAR PORT COASTS (OMAN SEA) [Volume 18, No. 2, 2003-2004, Pages 205-218]
OAK (QUEREUS EASTANEAEFOLIA)
VARIATION IN PHYSICAL AND MECHANICAL PROPERTIES OF OAK (QUEREUS EASTANEAEFOLIA C.A. MEY) IN SANGDEH REGION OF CASPIAN FORESTS [Volume 17, 17-No. 300, 2002-2003, Pages 1-26]
Oak wood
Identification of compounds derived in pyrolysis oils from Oak,
Poplar wood and Bagasse at 573 oK [Volume 28, Issue 3, 2013-2014, Pages 476-488]
OCC
Comparing the performance of cationic starch, corn and tapioca to improve the strength characteristics of paper from old corrugated containers [Volume 31, Issue 4, 2016-2017, Pages 662-670]
OCC
The impact of nanoclay on the performance of polypropylene/OCC fibers/nanoclay composite [Volume 27, Issue 3, 2012-2013, Pages 373-385]
OCC
Investigation on the properties of polypropylene/old corrugated container fibers composites with added foaming agents [Volume 27, Issue 3, 2012-2013, Pages 445-460]
OCC
The Influence of Alkalinity in Oxygen Delignification of Soda/AQ Pulp From
Old Corrugated Container [Volume 26, Issue 2, 2011-2012, Pages 232-242]
OCC
Investigation of the independent and combined effect of different additives on the properties of liner and fluting paper made from OCC [Volume 37, Issue 3, 2022-2023, Pages 204-216]
OCC
Effect of Alkali Oxidation of fiber on characteristic of virgin and recycled pulp [Volume 38, Issue 4, 2023-2024, Pages 316-329]
OCC Fibers
Investigation of OCC Fiber/Polymers Composites in Air – Forming Production [Volume 23, Issue 2, 2008-2009, Pages 91-101]
Occlusion
Detection and differentiation of the beech tree knot (Fagus orientalis Libsky) by non-destructive stress wave method [Volume 37, Issue 4, 2022-2023, Pages 282-292]
OCC pulp
Comparative Investigation of the Effect of Pre and Post -Enzymatic Refining on OCC Pulp Properties [Volume 29, Summer 2, 2014-2015, Pages 254-265]
OCC pulp
Potential of GL as cationic polymer to control stickies of OCC pulp [Volume 33, Issue 2, 2018-2019, Pages 256-269]
OCC pulp
Investigating the effect of pH on cellulase enzyme efficiency on the OCC pulp properties [Volume 33, Issue 3, 2018-2019, Pages 381-390]
OCC pulp
Study on production of fluting paper from wheat straw soda – AQ pulp and OCC pulp blends [Volume 26, Issue 2, 2011-2012, Pages 387-397]
Oil-heat treatment
Evaluate the effect of oil-heat treatment of Fir species on contact angle and adhesion strength of water based clear and acid catalyzed transparent coat [Volume 30, SPRING 1, 2015-2016, Pages 173-181]
Old corrugated container
Comparing the Effect of Silica Sol and Bentonite Nanoparticles on the Performance of Cationic Starch for Drainability, Retention and Strength Properties of Recycled Paper [Volume 32, Issue 2, 2017-2018, Pages 227-237]
Old corrugated container
Investigation of applying the old corrugated container (OCC)
and aspen chips in particleboard production [Volume 26, Issue 1, 2011-2012, Pages 138-150]
Old corrugated container
Investigation on the feasibility of utilization wood and OCC fiber on the surface
layer of particleboard and their effects on surface hardness and roughness [Volume 25, Issue 1, 2010-2011, Pages 62-69]
Old corrugated container(OCC)
Comparison of the Effect of Using Cellulose Nanofibers and Cationic Starch instead of Refining on the Physical and Mechanical Properties of Manufacture Paper from OCC pulp [Volume 33, Issue 4, 2018-2019, Pages 593-605]
Old corrugators container
Effect of Nano TiO2 on Properties of Old Corrugated Paper Recycling Waste Water [Volume 29, WINTER 4, 2014-2015, Pages 526-237]
Old Magazine
The effect of different charges of sodium dithionite and bleaching
times on the optical and mechanical properties and COD
of bleached recycled mixed ONP and OMG pulps [Volume 29, Fall 3, 2014-2015, Pages 411-421]
Old newspaper
The effect of poly acrylic acid, sodium salt grafted to poly ethylene oxide complex
on the physical and optical properties of old newsprint paper deinked pulp [Volume 28, Issue 3, 2013-2014, Pages 405-416]
Old newspaper
The effect of different charges of sodium dithionite and bleaching
times on the optical and mechanical properties and COD
of bleached recycled mixed ONP and OMG pulps [Volume 29, Fall 3, 2014-2015, Pages 411-421]
Old newspaper
Enzymatic Versus Chemical Deinking of Old Newspaper [Volume 25, Issue 2, 2010-2011, Pages 223-233]
Old newspaper
Use of Central Composite Design for Optimization of ultrasonic pre-treatment parameters on chemical deinking of old newspaper [Volume 33, Issue 4, 2018-2019, Pages 489-500]
Old recycled pulp
The Effect of Using Cationic Starch and Bentonite on Physical and Mechanical Properties of Old Recycled Pulp [Volume 36, Issue 4, 2021-2022, Pages 404-416]
Old structural timber
Evaluation of the internal defaults and decay in old timber in building using non-destructive ground penetration radar (GPR) method [Volume 37, Issue 3, 2022-2023, Pages 217-228]
Olive Mill Sludge
Tensile and Impact Properties of Polyethylene/ Olive Mill Sludge Composites [Volume 29, Summer 2, 2014-2015, Pages 230-241]
Online control
Nondestructive Evaluation of Effects of Moisture Content and Temperature on the Elastic Properties of Beech Wood Using Flexural Vibration Test [Volume 32, Issue 1, 2017-2018, Pages 13-24]
OPACITY
Utilization of Organic Complex of Glanapone Stab Rather than Sodium Silicate in Peroxide Bleaching of Mixed Hardwood CMP Pulp [Volume 26, Issue 1, 2011-2012, Pages 193-217]
OPACITY
The effect of consistency on the optical properties of hydrogen peroxide bleached CMP pulp [Volume 26, Issue 2, 2011-2012, Pages 298-409]
OPACITY
Investigation of Substituting the organic complex of sulvy-x rather than sodium silicate in CMP pulp bleaching of Mazandaran wood and paper industries [Volume 26, Issue 3, 2011-2012, Pages 411-428]
OPACITY
Effect of refining of deinked pulp on the optical, physical and
mechanical properties of paper [Volume 24, Issue 1, 2009-2010, Pages 148-157]
OPACITY
Replacing imported long fiber pulp with kenaf bast fiber soda pulp to improve quality of paper made from bagasse soda pulp [Volume 23, Issue 2, 2008-2009, Pages 157-168]
OPACITY
DETERMINATION OF PRACTICAL PROPERTIES OF ALNUS GLUTINOSA GROWN AT SHORT ROTATION PERIOD IN PAPER MAKING [Volume 20, No., 1, 2005-2006, Pages 65-94]
OPACITY
P pulp bleaching whit hydrogen peroxide and sodium hypochlorite [Volume 35, Issue 1, 2020-2021, Pages 11-21]
Opcity
The Study of Fiber Fines and Its Effects On Optical and Physical Propertie of Newsprint Paper from CMP Pulp [Volume 22, Issue 1, 2007-2008, Pages 29-40]
Optical and mechanical properties
Effect of boiling water pre-treatment on the yield, physical, optical and mechanical properties of neutral sulfite semi chemical pulp from wheat straw [Volume 29, Fall 3, 2014-2015, Pages 422-433]
Optical and mechanical properties
An Investigation and comparison of newsprint properties from Bamboo and Reed CMP Pulps [Volume 30, Summer 2, 2015-2016, Pages 256-265]
Optical and mechanical properties
The Effect of ECF Bleaching on Optical and Mechanical Properties of Bagasse Soda Pulp [Volume 31, Summer 2, 2016-2017, Pages 349-361]
Optical and mechanical properties
Investigation and Comparison of Newsprint Properties from Bleached CMP Pulp of Ash and Orange Woods [Volume 31, Issue 4, 2016-2017, Pages 569-580]
Optical and mechanical properties
Investigation of Optical and Mechanical Properties of Bleached Chemi-mechanical Pulps (CMP) with Oxygen, Hydrogen Peroxide and Sodium Dithionite Stages [Volume 32, Issue 3, 2017-2018, Pages 311-321]
Optical and mechanical properties
Investigation and Comparison of Bagasse Soda Pulps Properties Bleached with Total Chlorine Free (TCF) and Elemental Chlorine Free (ECF) Stages [Volume 32, Issue 4, 2017-2018, Pages 473-485]
Optical and mechanical properties
Use of Central Composite Design for Optimization of ultrasonic pre-treatment parameters on chemical deinking of old newspaper [Volume 33, Issue 4, 2018-2019, Pages 489-500]
Optical and mechanical properties
Effect of Nano-fibrillated Cellulose and Chitosan Bio-polymeric System on the Optical and Mechanical Properties of Chemi-mechanical Pulp(CMP) [Volume 35, Issue 1, 2020-2021, Pages 61-75]
Optical and mechanical properties
Effect of Polyalumium Chloride and Nano-Chitosan Bio-polymeric System on the Optical and Mechanical Properties of Chemi-mechanical Pulp (CMP) [Volume 36, Issue 4, 2021-2022, Pages 368-381]
Optical and mechanical Properties
Determination the opti mum pulping and bleaching conditions for some forest species and evaluation its papers [Volume 33, Issue 1, 2018-2019, Pages 38-49]
Optical properties
The effect of poly acrylic acid, sodium salt grafted to poly ethylene oxide complex
on the physical and optical properties of old newsprint paper deinked pulp [Volume 28, Issue 3, 2013-2014, Pages 405-416]
Optical properties
Evaluation of pulp properties produced from rice straw by combination the monoethanolamine and potassium hydroxide [Volume 30, SPRING 1, 2015-2016, Pages 46-59]
Optical properties
Investigation on newsprint paper production from wheat straw and its specification [Volume 30, Summer 2, 2015-2016, Pages 320-329]
Optical properties
Investigation on imported aspen admixture with two hardwoods
native forest species for CMP pulping [Volume 30, WINTER 4, 2015-2016, Pages 662-673]
Optical properties
Properties of high quality paper from rag fibers recycling [Volume 27, Issue 3, 2012-2013, Pages 434-444]
Optical properties
Evaluating the Properties of Bleached Chemi-Mechanical Pulp (CMP) with One and Two-stage of Sodium Hypochlorite and Hydrogen Peroxide [Volume 33, Issue 2, 2018-2019, Pages 205-217]
Optical properties
Improvement of the properties of Poplar chemi-mechanical newsprint through controlling process parameters [Volume 33, Issue 2, 2018-2019, Pages 290-299]
Optical properties
The effect of heat ageing on color change and optical properties of bleached Chemi-Mechanical Pulp (CMP) with One and Two-stage of Sodium Hypochlorite and Hydrogen Peroxide [Volume 33, Issue 4, 2018-2019, Pages 467-477]
Optical properties
The effect of consistency on the optical properties of hydrogen peroxide bleached CMP pulp [Volume 26, Issue 2, 2011-2012, Pages 298-409]
Optical properties
Optical and physical properties of mixed hardwood CMP pulp and the birch wood [Volume 26, Issue 3, 2011-2012, Pages 523-534]
Optical properties
Effect of anthraquinone on NSSC pupling of P.deltoides [Volume 26, Issue 4, 2011-2012, Pages 622-633]
Optical properties
Studying from the Properties of Chemi-Mechanical Pulping and Alkaline Peroxide Mechanical Pulping of Wheat Straw Golestan province [Volume 25, Issue 1, 2010-2011, Pages 32-47]
Optical properties
Enzymatic Versus Chemical Deinking of Old Newspaper [Volume 25, Issue 2, 2010-2011, Pages 223-233]
Optical properties
Effects of xylanase on optical properties of bagasse kraft pulp in
ECF bleaching [Volume 24, Issue 2, 2009-2010, Pages 295-306]
Optical properties
Effect of ink and paper characteristics on optical properties of packaging
papers.Part II:Viscosity of ink 50-55 [Volume 24, Issue 2, 2009-2010, Pages 325-340]
Optical properties
The Study of Fiber Fines and Its Effects On Optical and Physical Propertie of Newsprint Paper from CMP Pulp [Volume 22, Issue 1, 2007-2008, Pages 29-40]
Optical properties
Applying Enzymatic treatment and Refining Sequence to Investigate Their Effect on Properties of Pulp and Paper Produced from Mixed Office Waste Paper [Volume 35, Issue 2, 2020-2021, Pages 195-204]
Optical properties
The Effect of nano-Chitosan, nano-Cellulose and DTPA Spray on the Optical Properties of Paper Obtained from Chemical-mechanical Pulp (CMP) [Volume 39, Issue 1, 2024-2025, Pages 55-71]
Optimazation
Optimization of process variables of carboxymethyl cellulose production from alpha-cellulose obtained from cotton Linter using response surface methodology [Volume 33, Issue 4, 2018-2019, Pages 579-592]
Orange
Investigation and Comparison of Newsprint Properties from Bleached CMP Pulp of Ash and Orange Woods [Volume 31, Issue 4, 2016-2017, Pages 569-580]
Organic bases
Study of Organic Bases Potential in Bagasse Pulping [Volume 22, Issue 2, 2007-2008, Pages 73-80]
Organic biocides
Laboratory Study of Synergistic Effects of Mixtures of Organic Biocides, Metal Chelator and Antioxidant Materials against Rainbow White-rot Fungus [Volume 32, Issue 3, 2017-2018, Pages 422-435]
Organic Complex of Sulvy-x
Investigation on the Application of the Organic Complex " Sulvy-x " in Peroxide Bleaching of Hornbeam CMP Pulp [Volume 26, Issue 1, 2011-2012, Pages 117-127]
Organic compounds
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood and Bark of Oak by Atomic Adsorption and GC-MS Methods [Volume 32, Issue 2, 2017-2018, Pages 275-286]
Organic compounds
Study on the Possibility of Identification and Comparison of Chemical Components in Wood Alnus Subcordata and Alnus Glutinosa GC-MS Methods [Volume 33, Issue 1, 2018-2019, Pages 1-11]
Organic compounds
A Study on the Possibility of Identification and Comparison of Metallic Ions and Chemical Components in Wood and Bark of Mulberry tree by Atomic Absorption and GC-MS Methods [Volume 35, Issue 3, 2020-2021, Pages 283-293]
Organic solvent
Study of Organic Bases Potential in Bagasse Pulping [Volume 22, Issue 2, 2007-2008, Pages 73-80]
Organizational entrepreneurship
Investigating the Status of Enterprise Entrepreneurship in Public and Private Companies Furniture [Volume 33, Issue 4, 2018-2019, Pages 522-530]
ORIENTED STRAND BOARD
The Investigation of Physical and Mechanical Properties of Oriented Strand Board (OSB) Production Using Corn Stalks Residues [Volume 33, Issue 2, 2018-2019, Pages 155-165]
ORIENTED STRAND BOARD
THE EFFECT OF RESIN AMOUNT AND ORIENTATION OF STRAND BOARD ON PHYSICAL AND MECHANICAL PROPERTIES [Volume 21, No., 2, 2006-2007, Pages 70-77]
OSB
Investigation on the properties of oriented strand boards (OSB) made from mixture ten- year- old poplar clones [Volume 31, Issue 4, 2016-2017, Pages 648-661]
OSB
Investigation Of press Temperature And press Time On Physical And Mechanical Properties Of OSB Board Made of Aspen [Volume 23, Issue 1, 2008-2009, Pages 74-82]
Oxidized Starch
Raw and Oxidized Starch Performance as Reinforcing Additives of Internal Bond in Recycled Multilayer Paperboards [Volume 35, Issue 1, 2020-2021, Pages 76-87]
Oxygen
Investigation of Optical and Mechanical Properties of Bleached Chemi-mechanical Pulps (CMP) with Oxygen, Hydrogen Peroxide and Sodium Dithionite Stages [Volume 32, Issue 3, 2017-2018, Pages 311-321]
Oxygen delignification
The potential of acid pre-hydrolyzed Soda-AQ process to manufacture highly purified α-cellulose [Volume 30, SPRING 1, 2015-2016, Pages 162-172]
Oxygen delignification
Investigating the effect of using oxygen delignification process on bagasse soda pulp properties [Volume 31, Summer 2, 2016-2017, Pages 261-279]
Oxygen delignification
Investigating the effect of using oxygen delignification process on kenaf bast kraft pulp properties [Volume 33, Issue 3, 2018-2019, Pages 369-380]
Oxygen delignification
The Influence of Alkalinity in Oxygen Delignification of Soda/AQ Pulp From
Old Corrugated Container [Volume 26, Issue 2, 2011-2012, Pages 232-242]
Oxygen transmission rate
Optimization of Coating Dimethoxydimethylsilane Using Plasma Enhanced Chemical Vapor Deposition (PECVD) on Coated Paper with Ethylene Vinyl Alcohol [Volume 34, Issue 1, 2019-2020, Pages 100-111]
P
Packaging
Selection and determination of the effective factors on packaging paper
print quality using design of experiments [Volume 29, SPRING 1, 2014-2015, Pages 12-22]
Packaging
Adhesion improvement of water-based flexographic inks on polyethylene coated paperboard by silane adhesion promoters [Volume 33, Issue 1, 2018-2019, Pages 76-87]
Packaging
The effect of some additives to improve water absorption and strengths of paper prepared from old corrugated container [Volume 38, Issue 4, 2023-2024, Pages 251-265]
Packaging paper
Effect of ink and paper characteristics on print quality in board-packaging industries based on print density index. [Volume 26, Issue 1, 2011-2012, Pages 39-57]
Packaging paper
Effect of ink and paper characteristics on optical properties of packaging
papers.Part II:Viscosity of ink 50-55 [Volume 24, Issue 2, 2009-2010, Pages 325-340]
Packaging paper
Comparison of separate and combined effect of nanosilica and cationic additives on the optical properties of the white packaging liner [Volume 38, Issue 4, 2023-2024, Pages 266-280]
PAE
Investigation on the effect of using PAE and CMC dual system on dry
and wet strength properties of tissue papers [Volume 28, Issue 3, 2013-2014, Pages 451-462]
Palm flour
The effect of using Palm Flour in the Manufacture of pp-based wood-plastic Composite [Volume 31, SPRING 1, 2016-2017, Pages 30-39]
PAPER
Study of side effects of Thiophanate-methyl fungicide on aesthetic and structural properties of paper [Volume 32, Issue 2, 2017-2018, Pages 261-274]
PAPER
The assessment of antifungal effect of Thiophanate-methyl on Paper destructive fungi and its application in conservation paper works [Volume 32, Issue 3, 2017-2018, Pages 345-358]
PAPER
PULP AND PAPER PROPERTIES OF EUCALYPTUS MICROTHECA GROWN IN SOUTHERN REGION OF IRAN [Volume 13, 13-No. 255, 2001, Pages 43-107]
PAPER
PULPING PROPERTIES OF RINDS FROM SUNFLOWER SEEDS [Volume 18, No. 2, 2003-2004, Pages 185-204]
PAPER
The effect of Benomyl antifungal on the gall ink used in historical documents [Volume 34, Issue 2, 2019-2020, Pages 276-289]
PAPER
Characterization of water-repellent cellulose paper and nanopaper using silane [Volume 35, Issue 1, 2020-2021, Pages 22-32]
Paper Coating
Biorefinery of Black Liquor from Bagasse Soda Pulping as Surface Coating on Recycled Based Paper [Volume 32, Issue 4, 2017-2018, Pages 498-508]
Paper oxidation
Modification of yellowing caused by oxidation of paper cellulose using Sodium borohydride and Sodium dithionite [Volume 38, Issue 4, 2023-2024, Pages 296-315]
Paper properties
Studying the Effect of Pulp Refining and Paper Pressing in Using Nano Fibrillated Cellulose to Improve the CMP Pulp Properties [Volume 31, Summer 2, 2016-2017, Pages 224-236]
Paper properties
Comparison of filler type performance on paper properties in the presence of cationic rosin sizing agent [Volume 32, Issue 2, 2017-2018, Pages 215-226]
Paper properties
Effect of alum-cationic rosin consumption level on the properties of papers made from recycled white sheets trimmings [Volume 32, Issue 2, 2017-2018, Pages 238-250]
Paper properties
Effect of Cationic Starch- CMC Self-assembly Layers on Recovered Fibers of Neutral Sulfite Semi-chemical Pulp and Resultant Paper Properties [Volume 33, Issue 1, 2018-2019, Pages 25-37]
Paper properties
Effects of oxidized recycled fibers on paper properties [Volume 27, Issue 3, 2012-2013, Pages 409-422]
Paper properties
Surface Coating of Acrylic acid-Chitosan Nano Hydrogel on Water Uptake, strengths and Optical Properties of Paper [Volume 34, Issue 1, 2019-2020, Pages 1-11]
Paper properties
Study on production of fluting paper from wheat straw soda – AQ pulp and OCC pulp blends [Volume 26, Issue 2, 2011-2012, Pages 387-397]
Paper properties
Investigation on Soda-Anthraquinone Pulping of Rapeseed Straw [Volume 24, Issue 1, 2009-2010, Pages 69-79]
Paper properties
The effect of dry- heat aging on properties of handmade papers reinforced with cellulose nanofibers treatment [Volume 36, Issue 4, 2021-2022, Pages 317-328]
Paper relics
The minimum inhibitory concentration of Benomyl for four fungal species on historical papers [Volume 32, Issue 1, 2017-2018, Pages 131-144]
Paper roughness
Effect of ink and paper characteristics on print quality in board-packaging industries based on print density index. [Volume 26, Issue 1, 2011-2012, Pages 39-57]
Paper roughness
Effect of ink and paper characteristics on optical properties of packaging
papers.Part II:Viscosity of ink 50-55 [Volume 24, Issue 2, 2009-2010, Pages 325-340]
PAPER SLUDGE
STUDY ON THE POSSIBILITY OF MANUFACTURING PARTICLEBOARD WITH PAPER SLUDGE AND WOOD CHIPS [Volume 19, No., 2, 2004-2005, Pages 137-158]
Paraffin
Effects of the Combined Modification Process of Glutaraldehyde/ paraffin on Biological and Mechanical properties of Poplar wood [Volume 31, Issue 4, 2016-2017, Pages 606-620]
Paraffin
Water repelling Populus Alba by emulsion of paraffin, Quaternary ammonium and hydrated starch [Volume 25, Issue 2, 2010-2011, Pages 211-222]
Paraffin
Investigation on The Effect of Paraffin content, Press Time and temperature on Practical Properties Especially Surface Roughness of Particleboard [Volume 23, Issue 1, 2008-2009, Pages 50-62]
PARENCHYMA
COMPARATIVE INVESTIGATION ON THE ANATOMICAL, PHYSICAL AND CHEMICAL CHARACTERISTICS OF ZIZIPHUS LOTUS (L.) LAM. FROM TWO REGION IN IRAN [Volume 18, No. 1, 2003-2004, Pages 109-133]
PARENCHYMA
COMPARATIVE INVESTIGATION ON THE ANATOMICAL, PHYSICAL AND CHEMICAL CHARACTERISTICS OF ZIZIPHUS SPINA - CHRISTI (L.) WILD FROM TWO REGION IN IRAN [Volume 18, No. 2, 2003-2004, Pages 155-184]
Parotia oersica
Comparative study on Pulping characteristics of Carpinus betulus and Parotia oersica woods [Volume 9, 9-No. 225, 2000, Pages 1-33]
PARTIBOARD
INVESTIGATION ON THE POSSIBILITY OF PARTICLEBOARD PRODUCTION FROM LIGNOCELLULOSIC SOURCES IN SOURTHERN REGION OF IRAN (2) REPORT 2: THE POTENTIAL OF DATE PALM RESIDUES AND PROSOPIS (MESQUITE) WOOD IN PARTICLEBOARD INDUSTRY [Volume 15, 15-No. 278, 2001-2002, Pages 61-87]
Particleboard
Evaluation of formaldehyde emissions from composite wood products [Volume 28, Summer 2, 2013-2014, Pages 195-204]
Particleboard
study on the possibility of particle board tree-layer manufacturing using of Cicer arietinum stem [Volume 28, Summer 2, 2013-2014, Pages 224-237]
Particleboard
The manufacture of particleboard using tannin-modified urea
formaldehyde adhesive [Volume 28, Summer 2, 2013-2014, Pages 266-276]
Particleboard
Utilization of pomegranate tree pruning in the core layer of particleboard
produced from Eucalyptus camedulensis wood [Volume 28, Summer 2, 2013-2014, Pages 381-391]
Particleboard
The possibility of estimating some of the acoustical properties of particleboards using plate mechanical vibration test [Volume 28, SPRING 1, 2013-2014, Pages 89-96]
Particleboard
Investigation on the influence of the density reduction of the particleboard by
canola residues on the properties of particleboard [Volume 28, Issue 3, 2013-2014, Pages 463-475]
Particleboard
Investigating the possibility of particleboard manufacture using corn
(zea mays) stalks [Volume 28, Issue 4, 2013-2014, Pages 608-627]
Particleboard
Evaluating the durability of particleboard made from steam pretreated poplar
wood particles against of Polyporus versicolor [Volume 29, Fall 3, 2014-2015, Pages 493-501]
Particleboard
Investigation of mechanical properties particleboard based on canola stalks and poplar wood by Response Surface Method (RSM) [Volume 30, Summer 2, 2015-2016, Pages 230-242]
Particleboard
Evaluation of Mechanical Properties of Homogeneous and layering Particleboards by Ultrasonic Technique [Volume 30, Summer 2, 2015-2016, Pages 341-349]
Particleboard
Stem and root comparative wood anatomy of (Calligonum comosum)
In the deserts of Iran and short sight to technical properties of fabricated of particleboard from its wood [Volume 30, WINTER 4, 2015-2016, Pages 538-551]
Particleboard
Utilization of Recycled Polyethylene For Physical & Mechanical Properties Modification of Particleboard [Volume 31, Issue 4, 2016-2017, Pages 557-568]
Particleboard
Construction of Particlboard Using Tannin-Based Phenol Adhesive [Volume 27, WINTER 4, 2012-2013, Pages 655-663]
Particleboard
withdrawal strength and bending strangth of L -type of nail′s joint in particleboard and MDF joints. [Volume 27, WINTER 4, 2012-2013, Pages 676-689]
Particleboard
Investigation the possibility of particleboard manufacturing using Hemp stalk [Volume 33, Issue 1, 2018-2019, Pages 63-75]
Particleboard
Influence of rose flower stem residues on the properties of poplar
wood particleboard [Volume 27, Issue 3, 2012-2013, Pages 483-494]
Particleboard
The impact of reeds residue addition on physical and mechanical properties
of particleboard made from pomegranate prunings [Volume 27, Issue 1, 2012-2013, Pages 38-50]
Particleboard
The potential of mesquite (somr) wood in particleboard production [Volume 27, Issue 1, 2012-2013, Pages 51-68]
Particleboard
The effect of wood species on particleboard properties [Volume 26, Issue 1, 2011-2012, Pages 58-71]
Particleboard
Investigation of applying the old corrugated container (OCC)
and aspen chips in particleboard production [Volume 26, Issue 1, 2011-2012, Pages 138-150]
Particleboard
Evaluation of steam pretreatment of poplar wood particles on the mechanical and physical properties of particleboard [Volume 26, Issue 4, 2011-2012, Pages 785-797]
Particleboard
Study of particleboard manufacture by nonconventional bonding [Volume 26, Issue 1, 2011-2012, Pages 1-9]
Particleboard
The Effects of Some Production Variables on Physical and Mechanical Properties of Particleboard Made of Alnus subcordata by UF and MUF resin [Volume 25, Issue 2, 2010-2011, Pages 201-210]
Particleboard
Effect of UF and MUF resins on the practical properties of particleboard produced
from rice straw and aspen particles [Volume 25, Issue 2, 2010-2011, Pages 321-331]
Particleboard
The Effects of Acetylated Poplar Particles on Applicational Properties of manufactured Particleboards with Isocyanate Resin [Volume 24, Issue 1, 2009-2010, Pages 80-90]
Particleboard
Investigation on the utilization of pomegranate wood for particleboard production [Volume 24, Issue 1, 2009-2010, Pages 158-166]
Particleboard
Investigation of physical and mechanical properties of particleboard
made from Apricot pruning and industrial wood particles [Volume 24, Issue 2, 2009-2010, Pages 244-253]
Particleboard
The pridiction of particleboard properties with regression models application in different condition production [Volume 23, Issue 1, 2008-2009, Pages 1-11]
Particleboard
Investigation on The Effect of Paraffin content, Press Time and temperature on Practical Properties Especially Surface Roughness of Particleboard [Volume 23, Issue 1, 2008-2009, Pages 50-62]
Particleboard
Application of Apple pruning on particleboard manufacturing [Volume 23, Issue 1, 2008-2009, Pages 63-73]
Particleboard
Effect of Acetylation on Physical and Mechanical Properties of Prticleboard [Volume 22, Issue 1, 2007-2008, Pages 18-28]
Particleboard
THE UTILIZATION OF BAGASSE AND LOGGING RESIDUES OF EUCALYPTUS FOR PARTICLEBOARD PRODUCTION [Volume 11, 11-No. 243, 2000-2001, Pages 1-60]
Particleboard
PROPERTIES OF PARTICLEBOARD MANUFACTURED FROM 4-YEARSOLD INTENSIVELY CULTURED POPULUS CLONES IN KARAJ [Volume 14, 14-No. 272, 2001-2002, Pages 49-72]
Particleboard
INVESTIGATION ON THE POSSIBILITY OF PARTICLEBOARD PRODUCTION FROM HALOXYLON SP. AND WHEAT STRAW [Volume 17, 17-No. 300, 2002-2003, Pages 27-56]
Particleboard
THE EFFECT OF HEAT ON WOOD ACIDITY IN PARTICLEBOARD PROCESS [Volume 18, No. 1, 2003-2004, Pages 39-62]
Particleboard
THE SUITABILITY OF TWO- YEAR- OLD POPLAR CLONES FOR PRODUCTION OF PARTICLEBOARD [Volume 19, No., 1, 2004-2005, Pages 1-24]
Particleboard
STUDY ON THE POSSIBILITY OF MANUFACTURING PARTICLEBOARD WITH PAPER SLUDGE AND WOOD CHIPS [Volume 19, No., 2, 2004-2005, Pages 137-158]
Particleboard
UTILIZATION OF GRAPE PRUNINGS RESIDUES IN PRODUCTION OF PARTICLEBOARD [Volume 19, No., 2, 2004-2005, Pages 159-174]
Particleboard
THE EFFECT OF RESIN CONTENT AND PRESS TIME ON PROPERTIES OF PARTICLEBOARD PRODUCTION FROM SOUTHERN LIGNOCELLULOSIC MATERIALS IN IRAN [Volume 20, No., 1, 2005-2006, Pages 47-64]
Particleboard
THE EFFECT OF MAT MOISTURE CONTENT GRADIENT ON PHYSICAL & MECHANICAL PROPERTIES OF PARTICLEBOARD [Volume 20, No., 1, 2005-2006, Pages 95-110]
Particleboard
A STUDY ON THE LONG TERM WATER ABSORPTION AND THICKNESS SWELLING BEHAVIOR OF WOOD-PLASTIC COMPOSITE PANELS [Volume 20, No., 2, 2005-2006, Pages 255-270]
Particleboard
MECHANICAL PROPERTIES OF WOOD-PLASTIC COMPOSITE MADE FROM PARTICLEBOARD AND MDF WASTES AND POLYETHYLENE (HDPE) WASTES [Volume 20, No., 2, 2005-2006, Pages 271-284]
Particleboard
THE EFFECT OF PRODUCING METHOD ON THE MECHANICAL PROPERTIES OF WOOD PLASTIC COMPOSITES MADE FROM PARTICLEBOARD WASTE [Volume 21, No., 1, 2006-2007, Pages 33-42]
Particleboard
Compression and tension strength properties of detachable joints in MDF and particleboard [Volume 34, Issue 2, 2019-2020, Pages 205-216]
Particleboard
The Potential of utilizing corn cop in particleboard production [Volume 34, Issue 4, 2019-2020, Pages 461-474]
PARTICLE BOARD
The use of black liquor and nano-graphene oxide in urea formaldehyde adhesive to improve the mechanical and physical properties of particleboard [Volume 32, Issue 3, 2017-2018, Pages 359-368]
PARTICLE BOARD
INVESTIGATION OF THE PRODUCTION CONDITION ON THE QUALITY OF PARTICLE BOARD MADE OF BAGASSE [Volume 20, No., 2, 2005-2006, Pages 237-254]
PARTICLEBOARDS
Effect of great size wood particles on density profile and physical -mechanical properties of particleboards made from poplar [Volume 26, Issue 4, 2011-2012, Pages 719-731]
PARTICLEBOARDS
UTILIZATION OF BEECH SLABS RESIDUES IN PARTICLEBOARDS PRODUCTION [Volume 20, No., 1, 2005-2006, Pages 111-132]
Particle Geometry
The pridiction of particleboard properties with regression models application in different condition production [Volume 23, Issue 1, 2008-2009, Pages 1-11]
Particle size
Production and evaluation of lightweight particle board using expanded polyurethane foam [Volume 38, Issue 2, 2023-2024, Pages 87-99]
Paullownia
Densification of Paullownia wood by using of hot-press [Volume 23, Issue 2, 2008-2009, Pages 136-148]
P.australis
THE COMPARISON OF FIBER BIOMETRY AND CHEMICAL COMPONENTS OF PHRAGMITES AUSTRALIS FOR PAPERMAKING [Volume 14, 14-No. 272, 2001-2002, Pages 73-109]
PCC
The performance of cationized pulp fiber as paper making
wet-end additive [Volume 29, Fall 3, 2014-2015, Pages 354-367]
PC number
The effect of heat ageing on color change and optical properties of bleached Chemi-Mechanical Pulp (CMP) with One and Two-stage of Sodium Hypochlorite and Hydrogen Peroxide [Volume 33, Issue 4, 2018-2019, Pages 467-477]
Pearson correlation
Correlation between vessel features and hardwood drying properties; case study: beech (Fagus orientalis) and oak (Quercus castaneifolia) [Volume 33, Issue 3, 2018-2019, Pages 417-427]
Penetration of coating
Investigation on the effect of different methods of applying transparent coatings on adhesion strength of coating in wooden surfaces [Volume 31, Summer 2, 2016-2017, Pages 248-260]
PERIODICITY
TECHNOLOGICAL CHARACTERISTICS OF SAXAUL WOOD IN IRAN (KERMAN PROVINCE) [Volume 18, No. 1, 2003-2004, Pages 89-108]
Permeability
The modifying effect of different Bacillus subtilis strains on permeability of pine (Pinus taeda) in two different culture media [Volume 31, Summer 2, 2016-2017, Pages 309-322]
Peroxide hydrogen
Depended pH behavior of chitosan on surface modified fibers of Kraft pulp [Volume 30, Fall 3, 2015-2016, Pages 513-524]
PESESON
THE EFFECT OF SIT CONDITION ON SOME MECHANICAL PROPERTIES OF PICEA ABIES WOOD IN TWO REGIONS [Volume 21, No., 1, 2006-2007, Pages 9-21]
PFI mill
Effect of Refining Intensity on Pulp and Paper Properties Made of Eucalyptus Camaldulensis Wood [Volume 24, Issue 1, 2009-2010, Pages 124-133]
PFI mill
Determination of optimum Refining of paper made of recovered Kraft liner [Volume 23, Issue 1, 2008-2009, Pages 12-19]
P.GLISTRALIS
THE COMPARISON ON PULPING OF P.AUSTRALIS [Volume 21, No., 1, 2006-2007, Pages 43-51]
Phanerochaete chrysosporium
Investigation on the influence of nutrients and treatment period on enzyme activities of Phanerochaete chrysosporium [Volume 25, Issue 2, 2010-2011, Pages 275-290]
Phenol-Formaldehid
Investigation on the properties of oriented strand boards (OSB) made from mixture ten- year- old poplar clones [Volume 31, Issue 4, 2016-2017, Pages 648-661]
Phenol formaldehyde
Effect of using waste tire rubber on physical and mechanical properties of Paulownia Oriented strand boards [Volume 36, Issue 1, 2021-2022, Pages 1-13]
Phenol formaldehyde resin
The possibility of using waste tire particles for oriented strand board production [Volume 37, Issue 2, 2022-2023, Pages 113-127]
Photodegradation
Analysis of Photodegraded Lignin and Lignin Model Compounds by ATR-FTIR Spectroscopy [Volume 29, Fall 3, 2014-2015, Pages 343-353]
Photodegradation
Analysis of photodegraded lignin from hardwood
bleached chemimechanical pulp by 13C-NMR [Volume 24, Issue 2, 2009-2010, Pages 254-263]
PHYSICAL
The influence of OCC pulp refining to improve the properties of test liner board [Volume 28, SPRING 1, 2013-2014, Pages 77-88]
PHYSICAL
Some anatomical, physical and chemical properties of toothbrush wood
(Salvadora persica L.) in Zabol region [Volume 29, SPRING 1, 2014-2015, Pages 132-141]
PHYSICAL
Investigation on the properties of medium density fiberboard produced from rose flower residues [Volume 29, SPRING 1, 2014-2015, Pages 23-33]
PHYSICAL
Effect of boiling water pre-treatment on the yield, physical, optical and mechanical properties of neutral sulfite semi chemical pulp from wheat straw [Volume 29, Fall 3, 2014-2015, Pages 422-433]
PHYSICAL
The Potential of Utilization of Cotton Stalk Residues In Particleboard Production [Volume 32, Issue 4, 2017-2018, Pages 462-472]
PHYSICAL
Influence of rose flower stem residues on the properties of poplar
wood particleboard [Volume 27, Issue 3, 2012-2013, Pages 483-494]
PHYSICAL
Investigating the properties of medium density fiberboard from
licorice root residues [Volume 27, Issue 3, 2012-2013, Pages 471-482]
PHYSICAL
Comparison of the NSSC pulp characteristics from Mazandaran wood and
paper mill and rapeseed straw NSSC pulp [Volume 27, Issue 2, 2012-2013, Pages 326-337]
PHYSICAL
Investigation on physical and mechanical properties of medium density
fiberboard produced from Eucalyptus steriaticalyx fibers [Volume 27, Issue 1, 2012-2013, Pages 89-99]
PHYSICAL
The mechanical properties of Pinus taeda L. wood growing in different
regions of Caspian forests [Volume 27, Issue 1, 2012-2013, Pages 178-187]
PHYSICAL
Effect of Acetylation on Physical and Mechanical Properties of Prticleboard [Volume 22, Issue 1, 2007-2008, Pages 18-28]
PHYSICAL
Properties of Eucalyptus Camaldulensis wood grown in southern region of Iran [Volume 10, 10-No. 232, 2000-2001, Pages 91-147]
PHYSICAL
WOOD PROPERTIES OF POPULUS DELTOIDES 77.51 GROWN IN GILAN, IRAN [Volume 15, 15-No. 278, 2001-2002, Pages 1-17]
PHYSICAL
COMPARATIVE INVESTIGATION ON THE ANATOMICAL, PHYSICAL AND CHEMICAL CHARACTERISTICS OF ZIZIPHUS SPINA - CHRISTI (L.) WILD FROM TWO REGION IN IRAN [Volume 18, No. 2, 2003-2004, Pages 155-184]
Physical & Mechanical Properties
Depended pH behavior of chitosan on surface modified fibers of Kraft pulp [Volume 30, Fall 3, 2015-2016, Pages 513-524]
Physical & Mechanical Properties
Investigation on Physical and Mechanical Properties of Medium Density Fiberboard Produced From Eucalyptus camaldulensis Fibers [Volume 25, Issue 1, 2010-2011, Pages 1-10]
Physical & Mechanical Properties
The potential of utilization of alder wood fibers In medium density fiberboard production [Volume 26, Issue 1, 2011-2012, Pages 26-38]
Physical & Mechanical Properties
The effect of press temperature and press time on Medium Density Fiberboard (MDF) properties produced from EucalyptusIntertexta fibers [Volume 24, Issue 1, 2009-2010, Pages 26-35]
Physical and Chemical Characteristics
Comparative investigation on the Biological, Anatomical, Physical and Chemical Characteristics of reeds from Hooralazim and talab Anzali [Volume 2, 2- No 166, 1996, Pages 1-115]
Physical and chemical properties
Anatomical, physical and chemical properties of
(Seidlitzia rosmarinus Bunge ex Boiss) wood in irano-torani region [Volume 27, Issue 2, 2012-2013, Pages 112-225]
PHYSICAL AND MECHANICAL PROPERTIES
Study of utilizing recycled polyvinyl chloride (PVC) in wood-plastic composite [Volume 28, SPRING 1, 2013-2014, Pages 35-47]
PHYSICAL AND MECHANICAL PROPERTIES
Effect of filler material and foaming agent on practical properties
of wood plastic composites [Volume 28, Issue 4, 2013-2014, Pages 597-607]
PHYSICAL AND MECHANICAL PROPERTIES
Preparation of cellulose-nylon composite in liquid phase using macro-waves [Volume 28, Issue 4, 2013-2014, Pages 732-741]
PHYSICAL AND MECHANICAL PROPERTIES
The effect of old corrugated container (OCC) powder and as urea
formaldehyde adhesive filler on properties of medium density
fiberboard made from bagasse and waste MDF [Volume 29, Fall 3, 2014-2015, Pages 452-463]
PHYSICAL AND MECHANICAL PROPERTIES
The effect ratio of adhesive urea formaldehyde melamine formaldehyde on the properties lightweight particleboard made from expanded polystyrene [Volume 29, WINTER 4, 2014-2015, Pages 626-635]
PHYSICAL AND MECHANICAL PROPERTIES
MDF Production from Date Palm Pruning Residues in Pilot plant Scale [Volume 29, WINTER 4, 2014-2015, Pages 594-608]
PHYSICAL AND MECHANICAL PROPERTIES
Study on the effect of polymer types and Quality of lignocellulosic materials on the Physical and Mechanical properties of wood/plastic composite [Volume 30, WINTER 4, 2015-2016, Pages 595-605]
PHYSICAL AND MECHANICAL PROPERTIES
The Investigation of Press Temperature and Time on Properties of Medium Density Fiberboard Produced From Cotton Stalks Fibers [Volume 31, Summer 2, 2016-2017, Pages 194-203]
PHYSICAL AND MECHANICAL PROPERTIES
Investigation on Effect of cement Types on the cement hydration and properties of wood-cement composites manufactured from sunflower stalk(Helianthus Annuus) [Volume 31, Summer 2, 2016-2017, Pages 336-348]
PHYSICAL AND MECHANICAL PROPERTIES
Calcium silicate formation using of Nano-silica and wood flour calcareous-treated and investigating of properties of the wood plastic composite obtained from it [Volume 31, Fall 3, 2016-2017, Pages 486-499]
PHYSICAL AND MECHANICAL PROPERTIES
The Effect of Nano-Wollastonite on Physical and Mechanical Properties of Wood Plastic Composites Made With Sunflower Stem Waste and Alder [Volume 31, Issue 4, 2016-2017, Pages 684-694]
PHYSICAL AND MECHANICAL PROPERTIES
Effect of beating time on properties of soda and monoethanolamine pulp from wheat straw [Volume 32, Issue 1, 2017-2018, Pages 94-105]
PHYSICAL AND MECHANICAL PROPERTIES
Evaluation of Physical and Mechanical Properties of Hygro-thermal Modified Wood [Volume 32, Issue 1, 2017-2018, Pages 1-12]
PHYSICAL AND MECHANICAL PROPERTIES
The use of black liquor and nano-graphene oxide in urea formaldehyde adhesive to improve the mechanical and physical properties of particleboard [Volume 32, Issue 3, 2017-2018, Pages 359-368]
PHYSICAL AND MECHANICAL PROPERTIES
The effects of recycling on the physical and mechanical properties of wood plastitc composite made with high density polyethylene [Volume 32, Issue 3, 2017-2018, Pages 402-410]
PHYSICAL AND MECHANICAL PROPERTIES
The effect of using cellulosic Nanofiber and imported chemical pulp and paper on durable paper made of below comb fibers [Volume 33, Issue 3, 2018-2019, Pages 337-346]
PHYSICAL AND MECHANICAL PROPERTIES
Effect of mat moisture content and Cu nanoparticles on heat transfer and physical and mechanical properties of poplar particleboard [Volume 27, Issue 2, 2012-2013, Pages 348-360]
PHYSICAL AND MECHANICAL PROPERTIES
Effect of nanoclay on the properties of medium density
fiberboard (MDF) [Volume 26, Issue 4, 2011-2012, Pages 699-707]
PHYSICAL AND MECHANICAL PROPERTIES
Effect of great size wood particles on density profile and physical -mechanical properties of particleboards made from poplar [Volume 26, Issue 4, 2011-2012, Pages 719-731]
PHYSICAL AND MECHANICAL PROPERTIES
An Investigation on the possibility of utilizing domestic wood in cooling towers [Volume 25, Issue 2, 2010-2011, Pages 170-186]
PHYSICAL AND MECHANICAL PROPERTIES
The Effects of Some Production Variables on Physical and Mechanical Properties of Particleboard Made of Alnus subcordata by UF and MUF resin [Volume 25, Issue 2, 2010-2011, Pages 201-210]
PHYSICAL AND MECHANICAL PROPERTIES
Feasibility of utilizing polypropylene as a binder for plywood manufacture [Volume 24, Issue 1, 2009-2010, Pages 91-98]
PHYSICAL AND MECHANICAL PROPERTIES
Investigation of physical and mechanical properties of particleboard
made from Apricot pruning and industrial wood particles [Volume 24, Issue 2, 2009-2010, Pages 244-253]
PHYSICAL AND MECHANICAL PROPERTIES
Application of Apple pruning on particleboard manufacturing [Volume 23, Issue 1, 2008-2009, Pages 63-73]
PHYSICAL AND MECHANICAL PROPERTIES
The effect of steaming time and resin content on MDF made from canola straw [Volume 23, Issue 2, 2008-2009, Pages 149-156]
PHYSICAL AND MECHANICAL PROPERTIES
Variation in Mechanical properties of oak
(Quercus castanefolia C.A.Mey) wood grown of Shafarod Forests (Gilan), Iran [Volume 22, Issue 1, 2007-2008, Pages 41-50]
PHYSICAL AND MECHANICAL PROPERTIES
VARIATION IN MECHANICAL PROPERTIES OF BEECH (FAGUS ORIENTALIS LIPSKY) WOOD GROWN AT DIFFERENT ELEVATION OF ASALEM FORESTS (GILAN), IRAN [Volume 14, 14-No. 272, 2001-2002, Pages 1-26]
PHYSICAL AND MECHANICAL PROPERTIES
VARIATION IN MECHANICAL PROPERTIES OF HORNBEAM (CARPINUS BETULUS L.) WOOD GROWN AT DIFFERENT ELEVATION OF ASALEM FORESTS (GILAN), IRAN [Volume 15, 15-No. 278, 2001-2002, Pages 33-60]
PHYSICAL AND MECHANICAL PROPERTIES
VARIATION IN PHYSICAL AND MECHANICAL PROPERTIES OF OAK (QUEREUS EASTANEAEFOLIA C.A. MEY) IN SANGDEH REGION OF CASPIAN FORESTS [Volume 17, 17-No. 300, 2002-2003, Pages 1-26]
PHYSICAL AND MECHANICAL PROPERTIES
THE SUITABILITY OF TWO- YEAR- OLD POPLAR CLONES FOR PRODUCTION OF PARTICLEBOARD [Volume 19, No., 1, 2004-2005, Pages 1-24]
PHYSICAL AND MECHANICAL PROPERTIES
VARIATION IN MECHANICAL PROPERTIES OF BEECH (FAGUS ORIENTALIS LIPSKY) WOOD GROWN ON SANGDEH FORESTS (MAZANDERAN), IRAN [Volume 19, No., 2, 2004-2005, Pages 175-192]
PHYSICAL AND MECHANICAL PROPERTIES
VARIATION IN MECHANICAL PROPERTIES OF HORNBEAM WOOD (CARPINUS BETULUS L.) GROWN AT DIFFERENT ELEVATION OF GOLESTAN FORESTS, IRAN [Volume 19, No., 2, 2004-2005, Pages 259-287]
PHYSICAL AND MECHANICAL PROPERTIES
THE EFFECT OF RESIN AMOUNT AND ORIENTATION OF STRAND BOARD ON PHYSICAL AND MECHANICAL PROPERTIES [Volume 21, No., 2, 2006-2007, Pages 70-77]
PHYSICAL AND MECHANICAL PROPERTIES
Influence of filler modification on physical and mechanical properties of wood plastic composite [Volume 34, Issue 4, 2019-2020, Pages 435-447]
PHYSICAL AND MECHANICAL PROPERTIES
Effect of press conditions on physical and mechanical properties of hydro thermo- mechanical treated poplar wood [Volume 36, Issue 3, 2021-2022, Pages 218-230]
PHYSICAL AND MECHANICAL PROPERTIES
The Possibility of Utilization of Pistachio lignocellulosic residue in Particleboard Production [Volume 36, Issue 4, 2021-2022, Pages 329-339]
PHYSICAL AND MECHANICAL PROPERTIES
Investigating the effect of functionalized carbon nanotubes on physical and mechanical properties of wood-plastic nanocomposite [Volume 38, Issue 1, 2023-2024, Pages 59-74]
PHYSICAL AND MECHANICAL PROPERTIES
Influence of thermally modification of ash and spruce on the functionality of fungal destructive agent (Coniophora puteana) [Volume 38, Issue 3, 2023-2024, Pages 170-180]
PHYSICAL CHARACTERISTICS
THE INVESTIGATION ON ANATOMICAL, CHEMICAL AND PHYSICAL CHARACTERISTICS OF SAXAUL WOOD (HALOXYLON PERSICUM) FROM HARESABAD-E-SABZEVAR [Volume 21, No., 2, 2006-2007, Pages 78-94]
Physical - mechanical properties
Effect of bark content on physical and mechanical properties of the kraft pulp from chips Populus deltoids [Volume 29, WINTER 4, 2014-2015, Pages 503-514]
Physical Mechanical Properties
A mathematical model to predict particleboard properties using the
GMDH-type neural network and genetic algorithm [Volume 29, Fall 3, 2014-2015, Pages 376-389]
Physical Mechanical Properties
Investigation of OCC Fiber/Polymers Composites in Air – Forming Production [Volume 23, Issue 2, 2008-2009, Pages 91-101]
PICEA ABIES
INVESTIGATION ON DELIGNIFICATION AND PULPING OF SPRUCE (PICEA ABIES) [Volume 18, No. 2, 2003-2004, Pages 219-238]
PICEA ABIES
THE EFFECT OF SIT CONDITION ON SOME MECHANICAL PROPERTIES OF PICEA ABIES WOOD IN TWO REGIONS [Volume 21, No., 1, 2006-2007, Pages 9-21]
PINUS ELDARICA
INVESTIGATION ON TREND OF FIBER VARIATION OF PINUS ELDARICA [Volume 16, 16-No. 293, 2002-2003, Pages 73-93]
Pinus eldarica Medw
Investigation on wood properties of eldar pine and its relations to soil chemical and physical characteristics (in western of Mazandarn province platation) [Volume 29, Summer 2, 2014-2015, Pages 199-207]
Pinus taeda
The mechanical properties of Pinus taeda L. wood growing in different
regions of Caspian forests [Volume 27, Issue 1, 2012-2013, Pages 178-187]
PINUS TEADA
INVESTIGATION ON TRACHIEDS CHARACTERISTICS OF PINUS TEADA [Volume 19, No., 1, 2004-2005, Pages 25-48]
Plastics
Investigation of OCC Fiber/Polymers Composites in Air – Forming Production [Volume 23, Issue 2, 2008-2009, Pages 91-101]
Plate
Investigation of relationship between dynamic modulus of elasticity and static bending properties in particleboard plates [Volume 32, Issue 2, 2017-2018, Pages 193-204]
POLES
PRESERVATIVE TREATMENT OF GREEN POPLAR POLES BY USING TIRE -TUBE METHOD [Volume 19, No., 1, 2004-2005, Pages 97-114]
Polish
Effects of waste polyester fibers on the mechanical and thermal properties of WPC products [Volume 30, WINTER 4, 2015-2016, Pages 552-566]
Polyacrylamide
Investigation of replacement of imported long fiber pulp with cellulose nanofibers and cationic materials in the production of durable paper [Volume 36, Issue 2, 2021-2022, Pages 157-169]
Polyacrylamide
Comparison of separate and combined effect of nanosilica and cationic additives on the optical properties of the white packaging liner [Volume 38, Issue 4, 2023-2024, Pages 266-280]
Poly Aluminum Chloride
Sizing Mechanism of Recycled Test Liner Using Poly Aluminum Chloride and Rosin under Neutral Condition [Volume 23, Issue 1, 2008-2009, Pages 40-49]
Polyalumium chloride
Effect of Polyalumium Chloride and Nano-Chitosan Bio-polymeric System on the Optical and Mechanical Properties of Chemi-mechanical Pulp (CMP) [Volume 36, Issue 4, 2021-2022, Pages 368-381]
Polycaprolactone
Investigation of mechanical and optical properties of papers coated with Polycaprolactone - Nanocrystalline cellulose - zinc oxide Nanoparticle [Volume 34, Issue 1, 2019-2020, Pages 27-38]
Polycaprolactone
Production and investigation of cellulose nanocrystals properties obtained from cotton linter and their use as a reinforcing agent in polycaprolactone nanocomposite films [Volume 38, Issue 3, 2023-2024, Pages 225-236]
Polycrease ECR
Influence of Chemical Modification with Polycrease ECR on the Functional Performance of Poplar wood Polymer [Volume 32, Issue 1, 2017-2018, Pages 33-46]
Polycrease ECR (mDMDHEU)
Modification of Paulownia Wood with methylolated dimethyloldihydroxyethylenurea (mDMDHEU) and the investigation of its effect on Some of Strength Properties [Volume 32, Issue 3, 2017-2018, Pages 436-449]
Polyethylene
Effect of nano-wollastonite, poly vinyl chloride and heavy polyethylene polymers and board structure on fire resistance of particleboard made of pepper stalk and industrial wood [Volume 30, Fall 3, 2015-2016, Pages 503-512]
Polyethylene
Comparison of Tensile Properties and Mechanical-Dynamic Analysis of Poly-Lactic Acid / Poly-Ethylene Compounded with Natural Fibers [Volume 33, Issue 2, 2018-2019, Pages 218-230]
Polyethylene
Influence of paper mill sludge on the long term hygroscopic behavior
of flat pressed wood-plastic composites [Volume 27, Issue 1, 2012-2013, Pages 81-88]
Polyethylene
The effect of paper sludge , content and polymer types on the physical properties of wood- plastic composites [Volume 26, Issue 3, 2011-2012, Pages 486-494]
Polyethylene
Creep behavior of the composites made from creep behavior of the composites made from waste materials of OCC recycling mills [Volume 26, Issue 4, 2011-2012, Pages 798-810]
Polyethylene
Investigation on Wood Plastic Composite Resistance against Water, Fire and Fungal attack Compared to Untreated Maple and Elm [Volume 22, Issue 2, 2007-2008, Pages 81-98]
Poly ethylene
Investigating the use of wood-flour of hybrid populus (euphratica-alba) cultivar of “Mofid” in wood-plastic composite [Volume 36, Issue 3, 2021-2022, Pages 231-242]
Poly-lactic acid
Assessment of the Biodegradability of Poly-Lactic Acid - Canola stem flour Composites against Natural Biological Factors [Volume 34, Issue 1, 2019-2020, Pages 50-61]
Poly Lactic Acid
THE INVESTIGATION OF POLY LACTIC ACID /WHEAT STRAW FIBERS TREATED WITH SILANE COMPOSITES [Volume 30, Summer 2, 2015-2016, Pages 207-219]
Poly Lactic Acid
Comparison of Tensile Properties and Mechanical-Dynamic Analysis of Poly-Lactic Acid / Poly-Ethylene Compounded with Natural Fibers [Volume 33, Issue 2, 2018-2019, Pages 218-230]
Poly Lactic Acid
The effect of using flame retardant mineral fillers on physical and thermal properties of poly lactic acid-rice husk composite [Volume 36, Issue 2, 2021-2022, Pages 105-118]
Polypropylene
Physical and mechanical properties of wood-plastic composite made of
Canola stem residues and polypropylene [Volume 28, Issue 4, 2013-2014, Pages 628-641]
Polypropylene
Effect of nanoclay-particles on physical and mechanical properties of composites
made of almond shell powder-polypropylene [Volume 28, Issue 4, 2013-2014, Pages 654-671]
Polypropylene
Improving the mechanical and physical of wheat straw particleboard using polypropylene powder [Volume 29, Fall 3, 2014-2015, Pages 464-473]
Polypropylene
The influence of using waste PET on the mechanical and rheological
properties of wood flour filled PP composites [Volume 29, WINTER 4, 2014-2015, Pages 581-593]
Polypropylene
Investigating the Effect of Cotton Stalks Bark on Physical and Mechanical Properties of Cotton Stalk Flour- Polypropylene Composite [Volume 30, SPRING 1, 2015-2016, Pages 144-161]
Polypropylene
Investigation on Morphological and Mechanical Properties of Coupling Agents on Baggass Polypropylene Composites [Volume 30, SPRING 1, 2015-2016, Pages 85-96]
Polypropylene
Potential of Agricultural Residues Fibers and mineral material in Wood Plastics Composites Production [Volume 30, Summer 2, 2015-2016, Pages 220-229]
Polypropylene
Investigation on the effect of cellulose fiber surface characteristics on mechanical properties of cellulose fiber /polypropylene composite [Volume 30, Summer 2, 2015-2016, Pages 183-193]
Polypropylene
The possibility of utilization of soy straw powder in wood/plastic composites produced with polypropylene [Volume 30, Fall 3, 2015-2016, Pages 434-446]
Polypropylene
The Study of Pulp-Polypropylene biocomposites Properties produced from non-extracted and pre-extracted Bagasse with hot water [Volume 31, SPRING 1, 2016-2017, Pages 78-91]
Polypropylene
The effect of using Palm Flour in the Manufacture of pp-based wood-plastic Composite [Volume 31, SPRING 1, 2016-2017, Pages 30-39]
Polypropylene
The Effect of Utilizing ZnO Nanoparticles and Eggshell on Physical and Mechanical Properties of Wood -Plastic Composite Production [Volume 31, Summer 2, 2016-2017, Pages 323-335]
Polypropylene
The Influence of Silica Content on Mechanical Properties of Polypropylene/Wood Powder/Silica Composite [Volume 27, WINTER 4, 2012-2013, Pages 595-605]
Polypropylene
Investigation on the properties of polypropylene/old corrugated container fibers composites with added foaming agents [Volume 27, Issue 3, 2012-2013, Pages 445-460]
Polypropylene
Investigation on the effect of nanoclay on physical and tensile properties of nanocomposite made from reed residues [Volume 27, Issue 2, 2012-2013, Pages 202-211]
Polypropylene
Thermal properties and X-ray diffraction of wood plastic nanocomposite (effect of coupling agent and nanoclay content) [Volume 26, Issue 1, 2011-2012, Pages 151-160]
Polypropylene
The effect of paper sludge , content and polymer types on the physical properties of wood- plastic composites [Volume 26, Issue 3, 2011-2012, Pages 486-494]
Polypropylene
Feasibility of utilizing polypropylene as a binder for plywood manufacture [Volume 24, Issue 1, 2009-2010, Pages 91-98]
Polypropylene
Effect of compatibilizer, MAPP, on physical and mechanical properties of
reed stem flour- polypropylene composites [Volume 24, Issue 2, 2009-2010, Pages 232-243]
Polypropylene
Studies On Mechanical and Morphological Proprties Of
Bagasse - Polypropylene Composite [Volume 23, Issue 2, 2008-2009, Pages 178-190]
Polypropylene
Investigation on Wood Plastic Composite Resistance against Water, Fire and Fungal attack Compared to Untreated Maple and Elm [Volume 22, Issue 2, 2007-2008, Pages 81-98]
Polyurethane
Studying effect of accelerated aging on adhesion resistance of half polyester and polyurethane transparent coatings applied on maple and pine species [Volume 32, Issue 2, 2017-2018, Pages 205-214]
Polyurethane
An Investigation into the Effect of Moisture Content on Adhesion strength of Half-polyester and Polyurethane Clear Paints Applied to Wood Surface [Volume 33, Issue 4, 2018-2019, Pages 511-521]
Polyurethane
Effects of free and microencapsulated biocides on characteristics of wood coatings and their mold growth resistance [Volume 34, Issue 1, 2019-2020, Pages 39-49]
Polyurethane clear coat
The effect of adding zinc oxide nanoparticles on color change and adhesion strength of polyurethane coating on wood surface [Volume 30, WINTER 4, 2015-2016, Pages 690-704]
Poly-Vinyl Acetate
Lateral holding strength of wooden dowel, screw and ready-to-assemble joints
(RTA joints) constructed of Medium Density Fiberboard (MDF) [Volume 24, Issue 2, 2009-2010, Pages 219-231]
Poly (vinyl alcohol)
The Effect of Chitosan - Poly (vinyl alcohol) Coatings on Strength and Barrier Properties of Packaging Paper [Volume 30, Summer 2, 2015-2016, Pages 330-340]
Poly (vinyl alcohol)
Biodegradation and ecotoxicological impact of cellulose nanocomposites under Controlled Composting Conditions [Volume 33, Issue 1, 2018-2019, Pages 122-132]
Polyvinyl Alcohol
Preparation and Characterization of Electrospun Nanofiber of Poly (Vinyl Alcohol) and Cellulose Nanocrystals [Volume 33, Issue 3, 2018-2019, Pages 438-452]
Polyvinyl Alcohol
Evaluation of physical and mechanical properties of Nanocomposites made of polyvinyl alcohol - Nanofiber cellulose and Nano silicon dioxide [Volume 36, Issue 1, 2021-2022, Pages 78-89]
Poplar
Investigation of the antomical, biometry and chemical characteristics
of juvenile and mature poplar (Populus alba) wood [Volume 28, SPRING 1, 2013-2014, Pages 182-193]
Poplar
Effect of colloidal silica nanoparticles produced from rice husk on dimensional stability and water absorption of poplar wood (Populus deltoides) [Volume 28, Issue 4, 2013-2014, Pages 763-773]
Poplar
Effect of wetwood and blue stain (Ceratocystis spp.) on the drying rate and fluid transport coefficients of poplar (P. nigra) [Volume 29, WINTER 4, 2014-2015, Pages 572-580]
Poplar
Effect of zinc oxide nanoparticles synthesis precursor in hydrothermal method on structure and physical properties of poplar wood [Volume 30, Fall 3, 2015-2016, Pages 466-474]
Poplar
Investigation on the properties of oriented strand boards (OSB) made from mixture ten- year- old poplar clones [Volume 31, Issue 4, 2016-2017, Pages 648-661]
Poplar
Influence of Chemical Modification with Polycrease ECR on the Functional Performance of Poplar wood Polymer [Volume 32, Issue 1, 2017-2018, Pages 33-46]
Poplar
Prioritize of poplar wood processing industries in the Kurdistan province with the aim of poplar wood value chain upgrading [Volume 32, Issue 2, 2017-2018, Pages 181-192]
Poplar
Study on the effect of urea addition to urea-formaldehyde adhesive on physical and mechanical properties of poplar particleboard [Volume 27, WINTER 4, 2012-2013, Pages 649-654]
Poplar
Assessment of decay in poplar and beech by using of x-ray non-destructive method [Volume 33, Issue 1, 2018-2019, Pages 112-121]
Poplar
Comparison of stiffness parameters of two kinds of date palm using nondestructive test [Volume 33, Issue 1, 2018-2019, Pages 133-141]
Poplar
Improvement of the properties of Poplar chemi-mechanical newsprint through controlling process parameters [Volume 33, Issue 2, 2018-2019, Pages 290-299]
Poplar
Effect of xylanase treatment on properties of alkaline peroxide mechanical
pulp from poplar (Populus nigra) wood [Volume 27, Issue 1, 2012-2013, Pages 156-166]
Poplar
The effect of wood species on particleboard properties [Volume 26, Issue 1, 2011-2012, Pages 58-71]
Poplar
Comparison of the quality of poplar lumber in the upper, middle and lower rows of wood drying kiln [Volume 26, Issue 2, 2011-2012, Pages 326-338]
Poplar
The effect of drying intensity and moisture content on longitudinal permeability of poplar tension and normal wood (populus nigra ) [Volume 26, Issue 3, 2011-2012, Pages 477-485]
Poplar
The susceptibility of poplar tension and normal wood (P. nigra) to collapse during drying [Volume 26, Issue 3, 2011-2012, Pages 579-591]
Poplar
Effect of great size wood particles on density profile and physical -mechanical properties of particleboards made from poplar [Volume 26, Issue 4, 2011-2012, Pages 719-731]
Poplar
The effects of steaming time, press time and resin content on MDF properties [Volume 25, Issue 1, 2010-2011, Pages 11-21]
Poplar
The Effects of Acetylated Poplar Particles on Applicational Properties of manufactured Particleboards with Isocyanate Resin [Volume 24, Issue 1, 2009-2010, Pages 80-90]
Poplar
The effects of Poplar clones age variations and production conditions on medium density fiberboard (MDF) properties [Volume 23, Issue 1, 2008-2009, Pages 20-39]
Poplar
ACOUSTICAL PROPERTIES OF WOOD IN 2000, 4000 AND 8000 IN HERTZ FERQUENCIES [Volume 14, 14-No. 272, 2001-2002, Pages 27-47]
Poplar
INVESTIGATION OF PULP PAPER CHARACTERISTIC OF THREE POPLAR COLONS, P.NIGRA, 69/55, 144/9 DELTOIDS, ORAMERICAN 214 [Volume 20, No., 2, 2005-2006, Pages 151-168]
Poplar
INVESTIGATION ON TENSILE STRENGTH OF DOWEL JOINT IN PARTICLEBOARD FASTENING [Volume 20, No., 2, 2005-2006, Pages 169-184]
Poplar
Fire resistance and mechanical properties of nano-wollastonite/styrene-treated poplar wood [Volume 35, Issue 1, 2020-2021, Pages 46-60]
Poplar
Investigation of withdrawal resistance of reinforced T-shaped joint with fiber reinforced composites [Volume 35, Issue 3, 2020-2021, Pages 294-305]
Poplar
Effect of press conditions on physical and mechanical properties of hydro thermo- mechanical treated poplar wood [Volume 36, Issue 3, 2021-2022, Pages 218-230]
Poplar
The possibility of using waste tire particles for oriented strand board production [Volume 37, Issue 2, 2022-2023, Pages 113-127]
Poplar
Performance assessment of bending and shear stiffness of hybrid Beech-Poplar cross-laminated timber (CLT) using experimental and finite element methods [Volume 37, Issue 2, 2022-2023, Pages 99-112]
POPLAR INSULATION PARTICLEBOARD
THE EFFECTS OF DENSITY AND PRESS TIME ON POPLAR INSULATION PARTICLEBOARD PROPERTIES [Volume 21, No., 2, 2006-2007, Pages 115-122]
Poplar particleboard
Effect of mat moisture content and Cu nanoparticles on heat transfer and physical and mechanical properties of poplar particleboard [Volume 27, Issue 2, 2012-2013, Pages 348-360]
Poplar (Populus deltoides)
Evaluation of Physical and Mechanical Properties of Hygro-thermal Modified Wood [Volume 32, Issue 1, 2017-2018, Pages 1-12]
Populous deltoides
Comparative study of delignification efficiency and pulp yield of heart wood and sap wood of Populus deltoids by kraft and soda processes [Volume 25, Issue 1, 2010-2011, Pages 138-146]
Populus
Investigation of Properties of paper made from tensile wood and normal wood in Populus nigra [Volume 30, WINTER 4, 2015-2016, Pages 653-661]
Populus
Effects of Populous Deltoids Chips Washing Pre- Treatment Method on CMP Optical and Strength properties.
. [Volume 31, Fall 3, 2016-2017, Pages 375-387]
Populus
Potential of CMP pulp production of Salix species in comparison with Populus [Volume 32, Issue 4, 2017-2018, Pages 585-595]
Populus
PROPERTIES OF PARTICLEBOARD MANUFACTURED FROM 4-YEARSOLD INTENSIVELY CULTURED POPULUS CLONES IN KARAJ [Volume 14, 14-No. 272, 2001-2002, Pages 49-72]
Populus alba
Evaluation of Anatomical and Physical Properties of Juvenile/Mature Wood of
Populus alba and Populus × euramericana [Volume 24, Issue 1, 2009-2010, Pages 134-147]
Populus costanzo
Pulping and paper making properties of Populus costanzo [Volume 25, Issue 2, 2010-2011, Pages 157-169]
POPULUS DELTOIDES
Effect of bark content on physical and mechanical properties of the kraft pulp from chips Populus deltoids [Volume 29, WINTER 4, 2014-2015, Pages 503-514]
POPULUS DELTOIDES
The potential of acid pre-hydrolyzed Soda-AQ process to manufacture highly purified α-cellulose [Volume 30, SPRING 1, 2015-2016, Pages 162-172]
POPULUS DELTOIDES
Evaluating the Rate Equation of Delignification Reaction of Populus deltoides [Volume 32, Issue 1, 2017-2018, Pages 25-32]
POPULUS DELTOIDES
WOOD PROPERTIES OF POPULUS DELTOIDES 77.51 GROWN IN GILAN, IRAN [Volume 15, 15-No. 278, 2001-2002, Pages 1-17]
POPULUS DELTOIDES
Investigation of lignification and paper making characteristics of populus deltoids col. 77.51 grown under 3 rotation [Volume 16, 16-No. 293, 2002-2003, Pages 1-28]
Populus Deltoides species
Efficiency of Response Surface Methodology to Determine Effective Factors on Production Process of Carboxymethyl cellulose from Populus [Volume 34, Issue 2, 2019-2020, Pages 290-301]
Populus euramericana X
Evaluation of Anatomical and Physical Properties of Juvenile/Mature Wood of
Populus alba and Populus × euramericana [Volume 24, Issue 1, 2009-2010, Pages 134-147]
Populus nigra
Investigation on the effect of acetylation and the resin type on the biological resistance of aspen tree layered particleboard [Volume 26, Issue 3, 2011-2012, Pages 466-476]
Populus nigra
SAWING PATTERN FOR POPLAR WOOD (POPULUS NIGRA) [Volume 20, No., 1, 2005-2006, Pages 23-46]
Populus Strands
Effects of using Cellulose Nanocrystal as wood cement
Composite admixture on strength of physical and
Mechanical poroperties of wood cement board [Volume 35, Issue 3, 2020-2021, Pages 271-282]
Populus triplo
Pulping characteristics of Populus triplo wood [Volume 24, Issue 2, 2009-2010, Pages 183-193]
Porous materials
Production and Characterization of Lignocellulosic Aerogel from Rice Straw [Volume 34, Issue 1, 2019-2020, Pages 124-133]
Portland cement
Properties of cement made from agricultural waste [Volume 30, Fall 3, 2015-2016, Pages 457-465]
Portland cement
Evaluation of the properties of wood sawdust-cement perforated blocks [Volume 27, Issue 2, 2012-2013, Pages 294-305]
Portland cement
Investigation on the properties of cement-bagasse fiber composite as a
structural material [Volume 26, Issue 2, 2011-2012, Pages 291-299]
Portland cement
The use of bagasse in the manufacture of reinforced composite reinforced cement-fiber [Volume 34, Issue 2, 2019-2020, Pages 302-311]
Portland cement
Investigation of composite of three layers of cement and ionolite [Volume 35, Issue 1, 2020-2021, Pages 113-125]
Portland cement
Effects of using Cellulose Nanocrystal as wood cement
Composite admixture on strength of physical and
Mechanical poroperties of wood cement board [Volume 35, Issue 3, 2020-2021, Pages 271-282]
Portland cement
Study on Mechanical Properties of Kenaf-Cement Composite [Volume 37, Issue 2, 2022-2023, Pages 141-149]
Positive Mathematical
Investigating the Impact of Monetary Policy on Value Added Growth in Iran's Industrial Sub-Sectors (Positive Mathematical Programming Approach) with Emphasis on Wood industry sub-sector [Volume 34, Issue 4, 2019-2020, Pages 520-534]
Potassium
Comparative analysis of paper properties from rice straw with sodium
and potassium based chemimechanical pulping processes [Volume 28, Issue 3, 2013-2014, Pages 534-544]
Potassium hydroxide
Evaluation of pulp properties produced from rice straw by combination the monoethanolamine and potassium hydroxide [Volume 30, SPRING 1, 2015-2016, Pages 46-59]
Precipitated Calcium Carbonate
Improvement of printing and writing paper properties using PCC Filler Modified by cationic starch modified precipitated calcium carbonate filler [Volume 29, WINTER 4, 2014-2015, Pages 515-525]
Precipitated Calcium Carbonate
Effect of Precipitated Calcium Carbonate and Soy Protein on Properties of Writing and Printing Recycled Pulp [Volume 33, Issue 3, 2018-2019, Pages 311-322]
Preferences
Consumer behaviors in the decision- making process of foreign and domestic household wooden furniture buying [Volume 34, Issue 2, 2019-2020, Pages 167-179]
Preferences
Assessment of Customer Expectations and Preferences in Home and Office Furniture Purchase Process with Non-parametric Tests [Volume 37, Issue 1, 2022-2023, Pages 1-16]
Premixing Sizing
Sizing Mechanism of Recycled Test Liner Using Poly Aluminum Chloride and Rosin under Neutral Condition [Volume 23, Issue 1, 2008-2009, Pages 40-49]
PRESERVATION
PRESERVATIVE TREATMENT OF GREEN POPLAR POLES BY USING TIRE -TUBE METHOD [Volume 19, No., 1, 2004-2005, Pages 97-114]
Press Temperature and Press Time
The pridiction of particleboard properties with regression models application in different condition production [Volume 23, Issue 1, 2008-2009, Pages 1-11]
Press temperatures
Effect of cemical modification of lignocellulosics fiber on physical and
mechanical properties in MDF [Volume 24, Issue 2, 2009-2010, Pages 167-182]
Pretreatment
Comparison of hot water and alkaline pre-treatments on the properties
of wheat straw NSSC pulp [Volume 28, Issue 4, 2013-2014, Pages 774-794]
Pretreatment
The effects of pre-treatment and consistency on treatment time and brightness of bagasse alkaline peroxide mechanical pulp [Volume 27, Issue 1, 2012-2013, Pages 143-155]
Printing
Selection and determination of the effective factors on packaging paper
print quality using design of experiments [Volume 29, SPRING 1, 2014-2015, Pages 12-22]
Printing
Effect of ink and paper characteristics on print quality in board-packaging industries based on print density index. [Volume 26, Issue 1, 2011-2012, Pages 39-57]
Printing
Effect of ink and paper characteristics on optical properties of packaging
papers.Part II:Viscosity of ink 50-55 [Volume 24, Issue 2, 2009-2010, Pages 325-340]
Printing and writing paper consumption
Forecasting of printing and writing paper consumption in Iran using artificial neural network and classical methods [Volume 30, WINTER 4, 2015-2016, Pages 632-652]
Printing paper
Influences of Acetylation on Water Absorption and Dimensional Stability of Manufactured Paper [Volume 22, Issue 2, 2007-2008, Pages 99-108]
Prioritization
Identifying and prioritizing the components of sustainable production in the corrugated box making industry [Volume 38, Issue 1, 2023-2024, Pages 21-36]
Product layout
The effect of new product layout on customer satisfaction in wooden household furniture industries using structural equations model in Tehran province [Volume 31, Summer 2, 2016-2017, Pages 294-308]
Product purchase
Assessment of Customer Expectations and Preferences in Home and Office Furniture Purchase Process with Non-parametric Tests [Volume 37, Issue 1, 2022-2023, Pages 1-16]
Profilometery
Different CNC machining condition of paulownia wood by CNC;
Influence on the abbott roughness parameters [Volume 28, Summer 2, 2013-2014, Pages 301-312]
PROSOPIS (MEQUITE)
INVESTIGATION ON THE POSSIBILITY OF PARTICLEBOARD PRODUCTION FROM LIGNOCELLULOSIC SOURCES IN SOURTHERN REGION OF IRAN (2) REPORT 2: THE POTENTIAL OF DATE PALM RESIDUES AND PROSOPIS (MESQUITE) WOOD IN PARTICLEBOARD INDUSTRY [Volume 15, 15-No. 278, 2001-2002, Pages 61-87]
PROSOPIS (MESQUITE)
THE EFFECT OF RESIN CONTENT AND PRESS TIME ON PROPERTIES OF PARTICLEBOARD PRODUCTION FROM SOUTHERN LIGNOCELLULOSIC MATERIALS IN IRAN [Volume 20, No., 1, 2005-2006, Pages 47-64]
PULP AND PAPER
INVESTIGATION OF PULP PAPER CHARACTERISTIC OF THREE POPLAR COLONS, P.NIGRA, 69/55, 144/9 DELTOIDS, ORAMERICAN 214 [Volume 20, No., 2, 2005-2006, Pages 151-168]
PULP AND PAPER
INVESTIGATION ON TENSILE STRENGTH OF DOWEL JOINT IN PARTICLEBOARD FASTENING [Volume 20, No., 2, 2005-2006, Pages 169-184]
Pulp fiber
Effect of fiber length on mechanical properties of wood composite plastic (Polypropylene) [Volume 25, Issue 2, 2010-2011, Pages 187-200]
Pulp fractionation
The effect of fractionation and fine material removal from old corrugated container pulp on the properties of the produced paperboard in comparison to long fiber application [Volume 36, Issue 4, 2021-2022, Pages 382-393]
PULPING
Investigation on the influence of cooking intensity on strength
properties of bagasse soda pulp [Volume 24, Issue 2, 2009-2010, Pages 275-284]
PULPING
investigation of properties of wood from three tamarix species (T. meyeri, T. aphylla and T. stricta) [Volume 2, 2- No 166, 1996, Pages 152-188]
PULPING
INVESTIGATION ON SODA PULPING OF COTTON STALKS [Volume 20, No., 2, 2005-2006, Pages 185-206]
PULPING
THE COMPARISON ON PULPING OF P.AUSTRALIS [Volume 21, No., 1, 2006-2007, Pages 43-51]
Pulp yield
Investigation the properties of radiata pine (pinus radiata)
wood kraft pulp and paper [Volume 28, Issue 4, 2013-2014, Pages 685-690]
Pulp yield
Investigation of the properties of alkline peroxide mechanical pulp(APMP) from Cotton Stalk [Volume 26, Issue 1, 2011-2012, Pages 98-116]
Pulp yield
Comparative study of delignification efficiency and pulp yield of heart wood and sap wood of Populus deltoids by kraft and soda processes [Volume 25, Issue 1, 2010-2011, Pages 138-146]
Pulp yield
Investigation on Soda-Anthraquinone Pulping of Rapeseed Straw [Volume 24, Issue 1, 2009-2010, Pages 69-79]
Purity
The effect of kappa factor on chlorine dioxide bleaching sequence on the properties of dissolving pulp from recycled fibers (OCC) [Volume 37, Issue 1, 2022-2023, Pages 28-37]
PVA
Investigating the bending strength of wooden pin in
H-shaped joints in MDF [Volume 27, Issue 3, 2012-2013, Pages 423-433]
Q
Quaternary ammonium
Water repelling Populus Alba by emulsion of paraffin, Quaternary ammonium and hydrated starch [Volume 25, Issue 2, 2010-2011, Pages 211-222]
R
Rag
Properties of high quality paper from rag fibers recycling [Volume 27, Issue 3, 2012-2013, Pages 434-444]
Rapeseed straw
Comparison of the NSSC pulp characteristics from Mazandaran wood and
paper mill and rapeseed straw NSSC pulp [Volume 27, Issue 2, 2012-2013, Pages 326-337]
Rapeseed straw
Comparative Study On Fiber Dimension, Density And Chemical
Components Of Two Varieties Of Rapeseed Straw [Volume 24, Issue 1, 2009-2010, Pages 36-44]
Rapeseed straw
Investigation on Soda-Anthraquinone Pulping of Rapeseed Straw [Volume 24, Issue 1, 2009-2010, Pages 69-79]
Rape straw
Investigation of newsprint pulp strength of prepared from rape straw using chemo mechanical pulping process [Volume 26, Issue 3, 2011-2012, Pages 429-436]
Raw and Functionalized CNTs
Investigating the effect of functionalized carbon nanotubes on physical and mechanical properties of wood-plastic nanocomposite [Volume 38, Issue 1, 2023-2024, Pages 59-74]
RAY
STUDY ON COTTON STEM FOR CELLULOSIC INDUSTRIES [Volume 18, No. 2, 2003-2004, Pages 239-267]
RBB
Application of Soybean Waste as Adsorbent of Remozol Black B from Aqueous Solution [Volume 37, Issue 4, 2022-2023, Pages 318-329]
Ready-to-Assemble Joints
Lateral holding strength of wooden dowel, screw and ready-to-assemble joints
(RTA joints) constructed of Medium Density Fiberboard (MDF) [Volume 24, Issue 2, 2009-2010, Pages 219-231]
Recycled Fiber
Effect of refining of deinked pulp on the optical, physical and
mechanical properties of paper [Volume 24, Issue 1, 2009-2010, Pages 148-157]
Recycled Fiber
The effect of kappa factor changes in chlorine dioxide bleaching on the dissolution of pulp from OCC recycled fibers in sodium hydroxide / urea solvent [Volume 37, Issue 2, 2022-2023, Pages 166-176]
Recycled paper
Preparation and characterization of the cellulose nanocrystal properties from recycled papers and its application as a reinforcement agent in the hydroxypropyl methyl cellulose/cationic starch nanocomposite for use in food packaging industries [Volume 36, Issue 3, 2021-2022, Pages 243-255]
Recycled paper mill sludge
The effect of paper mill recycling sludge application on the mechanical
properties of composites based on recycled polymers [Volume 28, Issue 3, 2013-2014, Pages 509-521]
Recycled Paper Properties
Effect of cationic poly acrylamide - nano bentonite system on retention,
drainage and properties of recycled paper from OCC [Volume 29, Fall 3, 2014-2015, Pages 474-483]
Recycled Polyethylene
Effect of bagasse chemical treatment on the mechanical properties
of composites based on treated bagasse/recycled polyethylene [Volume 28, SPRING 1, 2013-2014, Pages 169-181]
Recycled Polyethylene
Utilization of Recycled Polyethylene For Physical & Mechanical Properties Modification of Particleboard [Volume 31, Issue 4, 2016-2017, Pages 557-568]
Recycled Polymer
A study on physical properties of composites produced using recycled polymer filled with paper mill sludge composites [Volume 29, Fall 3, 2014-2015, Pages 443-451]
Recycled Polymer
The effect of nanoclay contents on properties of WPC made of MDF and particleboard wastes with recycled polyethylene and polypropylene [Volume 35, Issue 1, 2020-2021, Pages 1-10]
Recycled polypropylene
The effect of water vapor treatment of wood flour on physical and mechanical properties of hybrid composite made of poplar fiber and recycled polypropylene [Volume 32, Issue 3, 2017-2018, Pages 411-421]
Recycle.Solvent.Stickies
A feasibility study on identification of stickies and their sources in packaging paper mill [Volume 38, Issue 2, 2023-2024, Pages 114-127]
Reducing agents
Modification of yellowing caused by oxidation of paper cellulose using Sodium borohydride and Sodium dithionite [Volume 38, Issue 4, 2023-2024, Pages 296-315]
Reduction
Investigation on the effect of acetylation and reduction treatments on the chromophore groups of isolated lignin from unbleached hardwoods chemimecanical pulp using FT-IR spectroscopy [Volume 29, SPRING 1, 2014-2015, Pages 79-93]
REED
An Investigation and comparison of newsprint properties from Bamboo and Reed CMP Pulps [Volume 30, Summer 2, 2015-2016, Pages 256-265]
REED
The impact of reeds residue addition on physical and mechanical properties
of particleboard made from pomegranate prunings [Volume 27, Issue 1, 2012-2013, Pages 38-50]
REED
THE COMPARISON ON PULPING OF P.AUSTRALIS [Volume 21, No., 1, 2006-2007, Pages 43-51]
Refining
The effect of fiber external fibrillation on paper properties [Volume 28, SPRING 1, 2013-2014, Pages 1-10]
Refining
The influence of OCC pulp refining to improve the properties of test liner board [Volume 28, SPRING 1, 2013-2014, Pages 77-88]
Refining
Evaluation of the refining effects on the properties of transparent
paper produced from bagasse fiber [Volume 29, Fall 3, 2014-2015, Pages 484-492]
Refining
The effect of TCF bleaching before and after refining on the CMP pulp properties [Volume 31, Fall 3, 2016-2017, Pages 510-521]
Refining
Effect of refining of deinked pulp on the optical, physical and
mechanical properties of paper [Volume 24, Issue 1, 2009-2010, Pages 148-157]
Refining
Study on the mechanical and optical properties of kraft liner paper produced
from mixing of OCC and virgin hardwoods kraft pulp [Volume 24, Issue 2, 2009-2010, Pages 264-274]
Refining
Determination of optimum Refining of paper made of recovered Kraft liner [Volume 23, Issue 1, 2008-2009, Pages 12-19]
Refining
Comparison of the Effect of Using Cellulose Nanofibers and Cationic Starch instead of Refining on the Physical and Mechanical Properties of Manufacture Paper from OCC pulp [Volume 33, Issue 4, 2018-2019, Pages 593-605]
Refining
Applying Enzymatic treatment and Refining Sequence to Investigate Their Effect on Properties of Pulp and Paper Produced from Mixed Office Waste Paper [Volume 35, Issue 2, 2020-2021, Pages 195-204]
Regression models
Study of initial alkali charge effects on properties of soda beech pulp by regression models [Volume 26, Issue 2, 2011-2012, Pages 219-231]
Regrind
The effects of recycling on the physical and mechanical properties of wood plastitc composite made with high density polyethylene [Volume 32, Issue 3, 2017-2018, Pages 402-410]
Remzol Black B Dye
Adsorption of Remazol Black B Dye from Aqueous Solution Using Bagasse [Volume 33, Issue 4, 2018-2019, Pages 478-488]
Resin
The potential of mesquite (somr) wood in particleboard production [Volume 27, Issue 1, 2012-2013, Pages 51-68]
Resin
The effects of steaming time, press time and resin content on MDF properties [Volume 25, Issue 1, 2010-2011, Pages 11-21]
Resin
The effects of Poplar clones age variations and production conditions on medium density fiberboard (MDF) properties [Volume 23, Issue 1, 2008-2009, Pages 20-39]
Resin
The effect of press time and resin content on properties of MDF produced
from Rice straw [Volume 22, Issue 1, 2007-2008, Pages 51-61]
Resin
The effect of Bagasse alkaline treatment on Medium Density Fiberboard properties [Volume 35, Issue 3, 2020-2021, Pages 219-231]
Resin and MOR
The effect of wood species on particleboard properties [Volume 26, Issue 1, 2011-2012, Pages 58-71]
RESIN CONTENT
The effect of steaming time and resin content on MDF made from canola straw [Volume 23, Issue 2, 2008-2009, Pages 149-156]
RESIN CONTENT
INVESTIGATION ON THE POSSIBILITY OF PARTICLEBOARD PRODUCTION FROM LIGNOCELLULOSIC SOURCES IN SOURTHERN REGION OF IRAN (2) REPORT 2: THE POTENTIAL OF DATE PALM RESIDUES AND PROSOPIS (MESQUITE) WOOD IN PARTICLEBOARD INDUSTRY [Volume 15, 15-No. 278, 2001-2002, Pages 61-87]
RESIN CONTENT
THE EFFECT OF RESIN CONTENT AND PRESS TIME ON PROPERTIES OF MDF FROM BAGGASSE [Volume 18, No. 1, 2003-2004, Pages 77-88]
RESIN CONTENT
THE EFFECT OF RESIN CONTENT AND PRESS TIME ON PROPERTIES OF PARTICLEBOARD PRODUCTION FROM SOUTHERN LIGNOCELLULOSIC MATERIALS IN IRAN [Volume 20, No., 1, 2005-2006, Pages 47-64]
RESIN CONTENT
UTILIZATION OF BEECH SLABS RESIDUES IN PARTICLEBOARDS PRODUCTION [Volume 20, No., 1, 2005-2006, Pages 111-132]
RESIN CONTENT
INVESTIGATION OF THE PRODUCTION CONDITION ON THE QUALITY OF PARTICLE BOARD MADE OF BAGASSE [Volume 20, No., 2, 2005-2006, Pages 237-254]
Resin dosage gradient
Investigation on the Effect of Resin Gradient Consumption on Particleboard Properties Made Using Rose Flower Stalks Residues [Volume 32, Issue 2, 2017-2018, Pages 251-260]
Resin dosage gradient
The Potential of Utilization of Cotton Stalk Residues In Particleboard Production [Volume 32, Issue 4, 2017-2018, Pages 462-472]
Resin type
MDF Production from Date Palm Pruning Residues in Pilot plant Scale [Volume 29, WINTER 4, 2014-2015, Pages 594-608]
RESIN (U.F.)
THE EFFECT OF RESIN AMOUNT AND ORIENTATION OF STRAND BOARD ON PHYSICAL AND MECHANICAL PROPERTIES [Volume 21, No., 2, 2006-2007, Pages 70-77]
Resistography
Investigation on biomechanical properties of pinus nigra Using stress wave technique and resistography [Volume 36, Issue 2, 2021-2022, Pages 144-156]
Retention Time and GC-MS
Identification and comparison of organic chemical components in leaves of the planted Elder Pine (Pinus eldarica) and Sycamore (Platanus orientalis) using GC-MS methods [Volume 37, Issue 3, 2022-2023, Pages 261-270]
Reverse Sizing
Sizing Mechanism of Recycled Test Liner Using Poly Aluminum Chloride and Rosin under Neutral Condition [Volume 23, Issue 1, 2008-2009, Pages 40-49]
Rheological Behavior
The influence of using waste PET on the mechanical and rheological
properties of wood flour filled PP composites [Volume 29, WINTER 4, 2014-2015, Pages 581-593]
Rheology
Investigating the effect of butanediol diglycidyl ether on the crosslinking of nanocellulose [Volume 33, Issue 2, 2018-2019, Pages 300-310]
Rhodamine B
Adsorption of rhodamine B with activated carbon prepared from beech wood [Volume 33, Issue 2, 2018-2019, Pages 280-289]
Rice husk
Effect of colloidal silica nanoparticles produced from rice husk on dimensional stability and water absorption of poplar wood (Populus deltoides) [Volume 28, Issue 4, 2013-2014, Pages 763-773]
Rice husk
Chemical Treatment of Rice Husk with Acetic Acid substitute for MAPE Compatibilizer in Rice Husk/High Density Poly Ethylene Composites [Volume 30, Fall 3, 2015-2016, Pages 443-456]
Rice husk
The effect of using flame retardant mineral fillers on physical and thermal properties of poly lactic acid-rice husk composite [Volume 36, Issue 2, 2021-2022, Pages 105-118]
Rice Husk Ash
Fabrication of cement blocks using rice husk ash and lignocellulosic fibers [Volume 28, Issue 3, 2013-2014, Pages 393-404]
Rice straw
Comparative analysis of paper properties from rice straw with sodium
and potassium based chemimechanical pulping processes [Volume 28, Issue 3, 2013-2014, Pages 534-544]
Rice straw
Investigation on properties of wood-cement panels based on
Agricultural residues [Volume 28, Issue 3, 2013-2014, Pages 583-896]
Rice straw
Evaluation of pulp properties produced from rice straw by combination the monoethanolamine and potassium hydroxide [Volume 30, SPRING 1, 2015-2016, Pages 46-59]
Rice straw
Investigation on effect of nano gel wollastonite on properties usage of wood-cement composites manufactured from rice straw fibers [Volume 33, Issue 3, 2018-2019, Pages 453-465]
Rice straw
The Effect of Lignocellulosic Material and Nanoclay on Physical, Mechanical and Morphological Properties of Wood Plastic Composite [Volume 27, Issue 2, 2012-2013, Pages 189-201]
Rice straw
Effect of UF and MUF resins on the practical properties of particleboard produced
from rice straw and aspen particles [Volume 25, Issue 2, 2010-2011, Pages 321-331]
Rice straw
The effect of press time and resin content on properties of MDF produced
from Rice straw [Volume 22, Issue 1, 2007-2008, Pages 51-61]
Rice straw
Production and Characterization of Lignocellulosic Aerogel from Rice Straw [Volume 34, Issue 1, 2019-2020, Pages 124-133]
Rice straw
Investigation of the effect of nano-wollastonite on the functional properties of gypsum-based composites made of rice straw [Volume 36, Issue 1, 2021-2022, Pages 14-25]
RINDS
PULPING PROPERTIES OF RINDS FROM SUNFLOWER SEEDS [Volume 18, No. 2, 2003-2004, Pages 185-204]
RING WIDTH
INVESTIGATION ON RELATION OF FIBER DIMENSION AND WOOD DENSITY WITH-AGE AND RING WIDTH IN E.CAMALDULENSIS DEHNH [Volume 19, No., 1, 2004-2005, Pages 69-98]
Root wood anatomy
The effect of erosion on anatomical characteristics of root and bark of Juniperus excelsa [Volume 27, WINTER 4, 2012-2013, Pages 529-583]
Rose flower stalks
Investigation on the Effect of Resin Gradient Consumption on Particleboard Properties Made Using Rose Flower Stalks Residues [Volume 32, Issue 2, 2017-2018, Pages 251-260]
Rosin
Effect of alum-cationic rosin consumption level on the properties of papers made from recycled white sheets trimmings [Volume 32, Issue 2, 2017-2018, Pages 238-250]
Rosin
Sizing Mechanism of Recycled Test Liner Using Poly Aluminum Chloride and Rosin under Neutral Condition [Volume 23, Issue 1, 2008-2009, Pages 40-49]
ROT
Study the basic building wooden structures to withstand the effects of weather and destructive biological agents Alborz research center [Volume 33, Issue 3, 2018-2019, Pages 402-416]
ROT
FACTORS CAUSING ATTACK OF WOODEN VESSELS AND MARINE STRUCTURE IN COSTS OF IRAN [Volume 16, 16-No. 293, 2002-2003, Pages 59-72]
Roughness
Selection and determination of the effective factors on packaging paper
print quality using design of experiments [Volume 29, SPRING 1, 2014-2015, Pages 12-22]
Roughness
Hydrophobization of Paper Using Organosilane and Titanium Dioxide Nanoparticles with Layer by Layer Method [Volume 32, Issue 4, 2017-2018, Pages 530-540]
Roughness
Effect of refining of deinked pulp on the optical, physical and
mechanical properties of paper [Volume 24, Issue 1, 2009-2010, Pages 148-157]
Roughness
The Study of Fiber Fines and Its Effects On Optical and Physical Propertie of Newsprint Paper from CMP Pulp [Volume 22, Issue 1, 2007-2008, Pages 29-40]
Roughness changes
The effect of glide plasma with methane gas on the hydrophobicity of poplar wood surface [Volume 36, Issue 3, 2021-2022, Pages 264-282]
Row
Comparison of the quality of poplar lumber in the upper, middle and lower rows of wood drying kiln [Volume 26, Issue 2, 2011-2012, Pages 326-338]
S
S-2
Comparison of the efficiency of two adsorbents activated carbon and beech wood powder copper-modified in removing sulfide ions (S-2) from the black liquor of Kraft pulp and paper [Volume 35, Issue 4, 2020-2021, Pages 376-391]
Salix
Potential of CMP pulp production of Salix species in comparison with Populus [Volume 32, Issue 4, 2017-2018, Pages 585-595]
Salix nigra
Comparison on the characteristics of Salix nigra Kraft and Soda pulp and paper [Volume 29, Summer 2, 2014-2015, Pages 324-334]
Sap wood
Comparative study of delignification efficiency and pulp yield of heart wood and sap wood of Populus deltoids by kraft and soda processes [Volume 25, Issue 1, 2010-2011, Pages 138-146]
Sari
Effects of climate variables (temperature and precipitation) on annual growth
of Zelkova carpinifolia [Volume 27, Issue 1, 2012-2013, Pages 69-80]
Sawdust
Properties of cement made from agricultural waste [Volume 30, Fall 3, 2015-2016, Pages 457-465]
Sawdust
Comparison of Tensile Properties and Mechanical-Dynamic Analysis of Poly-Lactic Acid / Poly-Ethylene Compounded with Natural Fibers [Volume 33, Issue 2, 2018-2019, Pages 218-230]
Sawdust
Evaluation of the properties of wood sawdust-cement perforated blocks [Volume 27, Issue 2, 2012-2013, Pages 294-305]
SAXAUL
TECHNOLOGICAL CHARACTERISTICS OF SAXAUL WOOD IN IRAN (KERMAN PROVINCE) [Volume 18, No. 1, 2003-2004, Pages 89-108]
SAXAUL WOOD
INVESTIGATION ON THE PROPERTIES OF MEDIUM DENSITY FIBERBOARDS FROM MIXTURE OF SAXAUL AND HORNBEAM WOOD [Volume 21, No., 1, 2006-2007, Pages 22-32]
SAXSUL
THE INVESTIGATION ON ANATOMICAL, CHEMICAL AND PHYSICAL CHARACTERISTICS OF SAXAUL WOOD (HALOXYLON PERSICUM) FROM HARESABAD-E-SABZEVAR [Volume 21, No., 2, 2006-2007, Pages 78-94]
Scanning Electron Microscope
Evaluation of effect of Nano SiO2 on the physical, mechanical and morphological properties of hybrid Nano composite from polypropylene-wood flour [Volume 30, Summer 2, 2015-2016, Pages 266-277]
Scanning Electron Microscopy (SEM)
Investigation effect of Weathering on Acetylated Beech Wood by FTIR
Spectroscopy and Electron Microscopic [Volume 25, Issue 1, 2010-2011, Pages 48-61]
Scarf joint
Detection of defects in joints using the variations in dynamic shear modulus and Correlation Coefficient factor in Beech Wood [Volume 28, Summer 2, 2013-2014, Pages 238-257]
SCHIZOGENOUS CANAL
COMPARATIVE INVESTIGATION ON THE ANATOMICAL, PHYSICAL AND CHEMICAL CHARACTERISTICS OF ZIZIPHUS LOTUS (L.) LAM. FROM TWO REGION IN IRAN [Volume 18, No. 1, 2003-2004, Pages 109-133]
Screw
Lateral holding strength of wooden dowel, screw and ready-to-assemble joints
(RTA joints) constructed of Medium Density Fiberboard (MDF) [Volume 24, Issue 2, 2009-2010, Pages 219-231]
Screw Penetration depth
Investigation on bending moment resistance of L- shaped screwed corner joints constructed of Plywood members [Volume 27, WINTER 4, 2012-2013, Pages 731-742]
Screw withdrawal resistance
Effect of furfurylation on shear strength of bond line and screw withdrawal resistance of beech and fir [Volume 31, Fall 3, 2016-2017, Pages 435-445]
Season
Investigation on the performance of solar kiln for wood drying in different seasons in Karaj [Volume 31, Fall 3, 2016-2017, Pages 472-485]
SEEDS-SUNFLOWER
PULPING PROPERTIES OF RINDS FROM SUNFLOWER SEEDS [Volume 18, No. 2, 2003-2004, Pages 185-204]
Seidlitzia rosmarinus
Anatomical, physical and chemical properties of
(Seidlitzia rosmarinus Bunge ex Boiss) wood in irano-torani region [Volume 27, Issue 2, 2012-2013, Pages 112-225]
Self-assembly Layers
Effect of Cationic Starch- CMC Self-assembly Layers on Recovered Fibers of Neutral Sulfite Semi-chemical Pulp and Resultant Paper Properties [Volume 33, Issue 1, 2018-2019, Pages 25-37]
SEM
The utilization of two recycled polymers and bagasse fiber in wood
plastic nano / clay composites production [Volume 28, Issue 3, 2013-2014, Pages 435-450]
SEM
Improvement of printing and writing paper properties using PCC Filler Modified by cationic starch modified precipitated calcium carbonate filler [Volume 29, WINTER 4, 2014-2015, Pages 515-525]
SEM
Investigation on Morphological and Mechanical Properties of Coupling Agents on Baggass Polypropylene Composites [Volume 30, SPRING 1, 2015-2016, Pages 85-96]
SEM
Investigation on possibility of making a Nano composite consist of Pebax and Nano cellulose [Volume 31, SPRING 1, 2016-2017, Pages 92-104]
SEM
Evaluation of Mechanical Properties of Old Corrugated Container Fibers – Polypropylene Composites Reinforced with Carbon Nanotubes (CNT) [Volume 32, Issue 1, 2017-2018, Pages 47-56]
SEM
The effect of nanoclay contents on properties of WPC made of MDF and particleboard wastes with recycled polyethylene and polypropylene [Volume 35, Issue 1, 2020-2021, Pages 1-10]
SEM
The effect of glide plasma with methane gas on the hydrophobicity of poplar wood surface [Volume 36, Issue 3, 2021-2022, Pages 264-282]
SEM and TEM
Comparing four lignocellulosic materials in the properties of
wood plastics/ nanoclay composites [Volume 27, Issue 2, 2012-2013, Pages 235-255]
Semi-green house
Investigation on the performance of solar kiln for wood drying in different seasons in Karaj [Volume 31, Fall 3, 2016-2017, Pages 472-485]
Sepestan wood
Anatomical, physical and chemical properties of Sepestan wood (Cordia myxa L.) in Iranshahr region [Volume 30, SPRING 1, 2015-2016, Pages 110-118]
Sequoia sempervirens
Pulp and paper making features of Sequoia sempervirens wood [Volume 26, Issue 1, 2011-2012, Pages 83-97]
Setting time of gypsum
Improvement of dimensional stability and mechanical properties of gypsum particleboard by adding white cement [Volume 30, SPRING 1, 2015-2016, Pages 132-143]
Shape factor
Thermography as a non-Destructive method in evaluation of wood density for Oak and Beech [Volume 34, Issue 1, 2019-2020, Pages 89-99]
Shearing stress
Effect of Moisture Content and Cutting Speed on Shearing Properties of Four Almond Tree Varieties [Volume 31, Fall 3, 2016-2017, Pages 388-397]
Shear modulus
Shear and elastic moduli of Poplar wood affected by glue coverage deficiency of lamination in a vibration based nondestructive approach [Volume 29, WINTER 4, 2014-2015, Pages 550-560]
Shear modulus
Nondestructive evaluation of dynamic properties in beach wood using free vibration method on free- free bar [Volume 29, WINTER 4, 2014-2015, Pages 633-643]
Shear strength
Effect of furfurylation on shear strength of bond line and screw withdrawal resistance of beech and fir [Volume 31, Fall 3, 2016-2017, Pages 435-445]
Shear strength
STUDY ON THE POSSIBILITY OF MANUFACTURING PARTICLEBOARD WITH PAPER SLUDGE AND WOOD CHIPS [Volume 19, No., 2, 2004-2005, Pages 137-158]
Shear strength
Effect of soy flour addition into urea-formaldehyde resin on formaldehyde emission [Volume 34, Issue 3, 2019-2020, Pages 387-396]
Shear strength
Mechanical and physical properties of plywood bonded with Bio-based Soy-tannin adhesive [Volume 37, Issue 3, 2022-2023, Pages 251-260]
Shear strength
Adhesive Modification and Improvement of Properties of Polyvinyl Acetate Using Nano silica [Volume 38, Issue 2, 2023-2024, Pages 128-140]
Sheet
Influence of Sheet Type, Layout, and Height of Cardboard Tubes as Cores on the Mechanical Properties of the Sandwich Panel [Volume 34, Issue 4, 2019-2020, Pages 563-571]
SHORT ROTATION
DETERMINATION OF PRACTICAL PROPERTIES OF ALNUS GLUTINOSA GROWN AT SHORT ROTATION PERIOD IN PAPER MAKING [Volume 20, No., 1, 2005-2006, Pages 65-94]
Siberian elm
Identification and Comparison of the Phenolic Chemical Components in Wood of Siberian elm, Common elm and Mountain elm trees by GC-MS Methods [Volume 38, Issue 3, 2023-2024, Pages 237-249]
Silane
Adhesion improvement of water-based flexographic inks on polyethylene coated paperboard by silane adhesion promoters [Volume 33, Issue 1, 2018-2019, Pages 76-87]
Silane
Characterization of water-repellent cellulose paper and nanopaper using silane [Volume 35, Issue 1, 2020-2021, Pages 22-32]
Silica
The Influence of Silica Content on Mechanical Properties of Polypropylene/Wood Powder/Silica Composite [Volume 27, WINTER 4, 2012-2013, Pages 595-605]
Silicate-free bleaching
Investigation on the Application of the Organic Complex " Sulvy-x " in Peroxide Bleaching of Hornbeam CMP Pulp [Volume 26, Issue 1, 2011-2012, Pages 117-127]
Silicate-free bleaching
Utilization of Organic Complex of Glanapone Stab Rather than Sodium Silicate in Peroxide Bleaching of Mixed Hardwood CMP Pulp [Volume 26, Issue 1, 2011-2012, Pages 193-217]
Silver nanoparticles
Application of nano silver in the production of antibacterial banknote paper [Volume 31, SPRING 1, 2016-2017, Pages 166-179]
Silver nanoparticles
Effect of silver nanoparticles prepared by plasma method on properties of papers made from Kraft pulp [Volume 34, Issue 1, 2019-2020, Pages 76-88]
Simultaneous
Simultaneous estimation of demand and supply functions & production and consumption projection of corrugated board in Iran [Volume 26, Issue 2, 2011-2012, Pages 256-270]
SiO2 Nano particles
Evaluation of effect of Nano SiO2 on the physical, mechanical and morphological properties of hybrid Nano composite from polypropylene-wood flour [Volume 30, Summer 2, 2015-2016, Pages 266-277]
SLABS RESIDUES
UTILIZATION OF BEECH SLABS RESIDUES IN PARTICLEBOARDS PRODUCTION [Volume 20, No., 1, 2005-2006, Pages 111-132]
Soaking
Effect of fermentation pretreatment and extraction on the acoustic properties of Ash wood (Fraxinus excelsior) [Volume 39, Issue 1, 2024-2025, Pages 27-40]
SODA
Comparative Investigation on the properties of Soda and Soda-Ethanol pulps from three hardwoods [Volume 30, Fall 3, 2015-2016, Pages 399-407]
SODA
Properties of high quality paper from rag fibers recycling [Volume 27, Issue 3, 2012-2013, Pages 434-444]
SODA
Investigation on Soda-Anthraquinone Pulping of Rapeseed Straw [Volume 24, Issue 1, 2009-2010, Pages 69-79]
SODA
INVESTIGATION ON SODA PULPING OF COTTON STALKS [Volume 20, No., 2, 2005-2006, Pages 185-206]
SODA
THE COMPARISON ON PULPING OF P.AUSTRALIS [Volume 21, No., 1, 2006-2007, Pages 43-51]
SODA
INVESTIGATION OF PROPERTIES OF ETHANOL-ALKALI, KRAFT AND SODA PULPS PREPARED FROM WHEAT STRAW [Volume 21, No., 2, 2006-2007, Pages 105-114]
Soda-Anthraquinone
Investigation on Soda-Anthraquinone Pulping of Rapeseed Straw [Volume 24, Issue 1, 2009-2010, Pages 69-79]
Soda cooking
Comparative study of delignification efficiency and pulp yield of heart wood and sap wood of Populus deltoids by kraft and soda processes [Volume 25, Issue 1, 2010-2011, Pages 138-146]
Soda Lignin
Studying on the Soda and Dioxane Lignin of Bagasse using Derivatization Followed by Reductive Cleavage (DFRC) [Volume 29, WINTER 4, 2014-2015, Pages 538-549]
Soda/oxygen
Investigation on the properties of totally chlorine free bleached
soda - oxygen pulp from old corrugated container [Volume 27, Issue 2, 2012-2013, Pages 256-266]
SODA PROCESS
Comparison on the characteristics of Salix nigra Kraft and Soda pulp and paper [Volume 29, Summer 2, 2014-2015, Pages 324-334]
SODA PROCESS
PULPING PROPERTIES OF RINDS FROM SUNFLOWER SEEDS [Volume 18, No. 2, 2003-2004, Pages 185-204]
Soda pulp
The Effect of ECF Bleaching on Optical and Mechanical Properties of Bagasse Soda Pulp [Volume 31, Summer 2, 2016-2017, Pages 349-361]
Soda pulp
Investigation and Comparison of Bagasse Soda Pulps Properties Bleached with Total Chlorine Free (TCF) and Elemental Chlorine Free (ECF) Stages [Volume 32, Issue 4, 2017-2018, Pages 473-485]
Soda pulp
Replacement of elemental chlorine-free (ECF) with the traditional method for bagasse soda pulp bleaching [Volume 35, Issue 3, 2020-2021, Pages 259-270]
Soda pulping
The effect of kenaf core and bast mixing on soda pulping
and paper strengths [Volume 28, Issue 4, 2013-2014, Pages 642-653]
Soda pulping
Investigation the fiber dimensions, chemical composition and soda pulp production from sorghum straw [Volume 29, SPRING 1, 2014-2015, Pages 34-43]
Soda pulping
Preparation of Bleached Soda Pulp from Canola Stalks [Volume 25, Issue 1, 2010-2011, Pages 80-90]
Sodium Dithionite
The effect of different charges of sodium dithionite and bleaching
times on the optical and mechanical properties and COD
of bleached recycled mixed ONP and OMG pulps [Volume 29, Fall 3, 2014-2015, Pages 411-421]
Sodium Hypochlorite
Evaluating the Properties of Bleached Chemi-Mechanical Pulp (CMP) with One and Two-stage of Sodium Hypochlorite and Hydrogen Peroxide [Volume 33, Issue 2, 2018-2019, Pages 205-217]
Sodium Hypochlorite
The effect of heat ageing on color change and optical properties of bleached Chemi-Mechanical Pulp (CMP) with One and Two-stage of Sodium Hypochlorite and Hydrogen Peroxide [Volume 33, Issue 4, 2018-2019, Pages 467-477]
Sodium Hypochlorite
P pulp bleaching whit hydrogen peroxide and sodium hypochlorite [Volume 35, Issue 1, 2020-2021, Pages 11-21]
Sodium Hypochlorite
Effect of Alkali Oxidation of fiber on characteristic of virgin and recycled pulp [Volume 38, Issue 4, 2023-2024, Pages 316-329]
Sodium silicate
Investigation of Substituting the organic complex of sulvy-x rather than sodium silicate in CMP pulp bleaching of Mazandaran wood and paper industries [Volume 26, Issue 3, 2011-2012, Pages 411-428]
Soil chemical properties
Investigation on wood properties of eldar pine and its relations to soil chemical and physical characteristics (in western of Mazandarn province platation) [Volume 29, Summer 2, 2014-2015, Pages 199-207]
Soluble and colloidal substances (DCS)
Investigate the effect of anionic trash management through removal and neutralization of dissolved and colloidal substances (DCS) On properties of CMP pulp and paper [Volume 33, Issue 3, 2018-2019, Pages 323-336]
Sorghum straw
Investigation the fiber dimensions, chemical composition and soda pulp production from sorghum straw [Volume 29, SPRING 1, 2014-2015, Pages 34-43]
SOUND ABSORPTION COEFFICIENT
ACOUSTICAL PROPERTIES OF WOOD IN 2000, 4000 AND 8000 IN HERTZ FERQUENCIES [Volume 14, 14-No. 272, 2001-2002, Pages 27-47]
SOUND ABSORPTION COEFFICIENT
THE EFFECTS OF TWO KINDS OF AGRICULTURAL WASTES (WHEAT AND BARELY STRAWS) ON NRC% OF ASPEN PARTICLEBOARDS [Volume 21, No., 2, 2006-2007, Pages 61-69]
Sound Velocity
Development of Tomographic Technology (Case Study: Trees from Karaj City) [Volume 33, Issue 1, 2018-2019, Pages 100-111]
SOUTHERN REGION OF IRAN
Properties of Eucalyptus Camaldulensis wood grown in southern region of Iran [Volume 10, 10-No. 232, 2000-2001, Pages 91-147]
Soybean flour
Effect of filler material and foaming agent on practical properties
of wood plastic composites [Volume 28, Issue 4, 2013-2014, Pages 597-607]
Soybean Lignocellulosic Waste
Application of Soybean Waste as Adsorbent of Remozol Black B from Aqueous Solution [Volume 37, Issue 4, 2022-2023, Pages 318-329]
Soybean oil
Effect of HeatTreatment with Modified Soybean Oil on Mechanical Properties of Beech [Volume 29, Summer 2, 2014-2015, Pages 208-219]
Soy flour
Effect of soy flour addition into urea-formaldehyde resin on formaldehyde emission [Volume 34, Issue 3, 2019-2020, Pages 387-396]
Soy oil
Evaluate the effect of oil-heat treatment of Fir species on contact angle and adhesion strength of water based clear and acid catalyzed transparent coat [Volume 30, SPRING 1, 2015-2016, Pages 173-181]
Soy protein
Effect of Precipitated Calcium Carbonate and Soy Protein on Properties of Writing and Printing Recycled Pulp [Volume 33, Issue 3, 2018-2019, Pages 311-322]
SPECIFIC GRAVITY
Variation in Mechanical properties of oak
(Quercus castanefolia C.A.Mey) wood grown of Shafarod Forests (Gilan), Iran [Volume 22, Issue 1, 2007-2008, Pages 41-50]
SPECIFIC GRAVITY
PROPERTIES OF EUCALYPTUS STERIATICALYX WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 11, 11-No. 243, 2000-2001, Pages 61-123]
SPECIFIC GRAVITY
PROPERTIES OF EUCALYPTUS INTERTEXTA WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 12, 12-No. 251, 2000-2001, Pages 73-139]
SPECIFIC GRAVITY
PROPERTIES OF EUCALYPTUS MICROTHECA WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 13, 13-No. 255, 2001, Pages 43-106]
SPECIFIC GRAVITY
VARIATION IN MECHANICAL PROPERTIES OF BEECH (FAGUS ORIENTALIS LIPSKY) WOOD GROWN ON SANGDEH FORESTS (MAZANDERAN), IRAN [Volume 19, No., 2, 2004-2005, Pages 175-192]
Specific shearing energy
Effect of Moisture Content and Cutting Speed on Shearing Properties of Four Almond Tree Varieties [Volume 31, Fall 3, 2016-2017, Pages 388-397]
Specific surface area
Identification of Cellulosic Fiberfines Properties in Kraft, Chemical Mechanical, and Recycled Pulps [Volume 33, Issue 2, 2018-2019, Pages 231-243]
Spectroscopy
Evaluation the mechanical properties of medium density fiber board of domestic production and imported with help of vertical density profile, infrared rays, Spectroscopy and imagine analyses (case study of Arian Sina Co) [Volume 32, Issue 1, 2017-2018, Pages 145-156]
Spectroscopy Methods
Studying on the Soda and Dioxane Lignin of Bagasse using Derivatization Followed by Reductive Cleavage (DFRC) [Volume 29, WINTER 4, 2014-2015, Pages 538-549]
SPEED
RELATIONSHIP BETWEEN MOISTURE CONTENT AND ULTRASONIC WAVE SPEED DURING KILN DRYING OF BASSWOOD LUMBER [Volume 21, No., 1, 2006-2007, Pages 1-8]
Spray gun
Investigation on the effect of different methods of applying transparent coatings on adhesion strength of coating in wooden surfaces [Volume 31, Summer 2, 2016-2017, Pages 248-260]
Spring back
Densification of Paullownia wood by using of hot-press [Volume 23, Issue 2, 2008-2009, Pages 136-148]
Spruce
Investigation on the heat transfer and evolution of temperature gradient through wood during drying; Case study: beech (Fagus orientalis) and spruce (Picea abies) [Volume 25, Issue 2, 2010-2011, Pages 234-247]
Spruce
Investigation of the effect of heat treatment and nanoparticles on wettability and transparent adhesion resistance of lacquer coating [Volume 37, Issue 1, 2022-2023, Pages 59-72]
Spruce and sycamore
The effect of nano wollastonite on the fire resistance and the adhesion properties of water based acrylic coating in wood surface [Volume 33, Issue 2, 2018-2019, Pages 166-178]
SPSS
Study of mental and emotional reactions to decoration color Living and working environment.. [Volume 34, Issue 1, 2019-2020, Pages 134-139]
Stain fungi
Identification of staining fungi in imported Norway spruce lumber [Volume 29, SPRING 1, 2014-2015, Pages 44-56]
Staphylococcus aureus
Investigation of antibacterial properties of melamine coatings containing chitosan and clay nanofibers [Volume 37, Issue 3, 2022-2023, Pages 239-250]
Staple
Investigation on withdrawal capacity of staple in the upholstered furniture frame made of LVL [Volume 32, Issue 2, 2017-2018, Pages 171-180]
Starch-Nanosilica
The effect of electerical conductivity on the performance and interaction of cationic starch- anionic nanosilica in pulp slurry [Volume 35, Issue 1, 2020-2021, Pages 102-112]
STATIC BENDING
Investigation of relationship between dynamic modulus of elasticity and static bending properties in particleboard plates [Volume 32, Issue 2, 2017-2018, Pages 193-204]
STATIC BENDING
INVESTIGATION ON DESIGN AND FABRICATION OF TWO HALF LAMINATED SLEEPERS IN COMPARION WITH CONVENTIONAL TYPE [Volume 12, 12-No. 251, 2000-2001, Pages 39-72]
Static standard tests
Nondestructive evaluation of flexural strength comparing to static bending strength in wood from Pine and Beech [Volume 34, Issue 2, 2019-2020, Pages 157-166]
Stationary
Investigation the causal relation of factors influencing on demand for
lumber imports in Iran [Volume 28, SPRING 1, 2013-2014, Pages 134-152]
Stationary
Investigation the causal relation the economic growth with consumption and imports of fine papers (Writing and printing & Newsprint paper) in Iran [Volume 29, SPRING 1, 2014-2015, Pages 117-131]
Steamed fiber
The effect of water vapor treatment of wood flour on physical and mechanical properties of hybrid composite made of poplar fiber and recycled polypropylene [Volume 32, Issue 3, 2017-2018, Pages 411-421]
Steaming
The effects of Poplar clones age variations and production conditions on medium density fiberboard (MDF) properties [Volume 23, Issue 1, 2008-2009, Pages 20-39]
Steam pre-treatment
Evaluation of steam pretreatment of poplar wood particles on the mechanical and physical properties of particleboard [Volume 26, Issue 4, 2011-2012, Pages 785-797]
Step wise Regression
The effect of anionic charge reduction of deinked pulp in Physical Strengths Improvement [Volume 32, Issue 1, 2017-2018, Pages 83-93]
STERIATICALYX
PROPERTIES OF EUCALYPTUS STERIATICALYX WOOD GROWN IN SOUTHERN REGION OF IRAN [Volume 11, 11-No. 243, 2000-2001, Pages 61-123]
Stickies
Potential of GL as cationic polymer to control stickies of OCC pulp [Volume 33, Issue 2, 2018-2019, Pages 256-269]
Stickies
ontrol of micro-stickies originated from recycling of Old Corrugated Containers (OCC) using some selected chemical and physical methods [Volume 38, Issue 2, 2023-2024, Pages 155-169]
Storage
Investigation of the storage time on color properties and chemical compositions of particle board made from bagasse [Volume 31, SPRING 1, 2016-2017, Pages 58-66]
Straw Particle board
Effect of wheat straw surface treatment by using amino silane coupling agent on properties of amino plastic resin-bonded wheat straw particle boards [Volume 26, Issue 1, 2011-2012, Pages 128-137]
Strength
Utilization of pomegranate tree pruning in the core layer of particleboard
produced from Eucalyptus camedulensis wood [Volume 28, Summer 2, 2013-2014, Pages 381-391]
Strength
Effect of CMP fiber grafting on strength properties of its paper [Volume 28, SPRING 1, 2013-2014, Pages 24-34]
Strength
The influence of OCC pulp refining to improve the properties of test liner board [Volume 28, SPRING 1, 2013-2014, Pages 77-88]
Strength
Investigation on the influence of the density reduction of the particleboard by
canola residues on the properties of particleboard [Volume 28, Issue 3, 2013-2014, Pages 463-475]
Strength
Effect of silane coupling agent on bond improvement of urea formaldehyde resin in wheat straw particleboard [Volume 29, Summer 2, 2014-2015, Pages 183-189]
Strength
Comparing the Performance of the Combination of Surfactant and Soap
in Wastepaper Deinking [Volume 30, SPRING 1, 2015-2016, Pages 26-36]
Strength
The Potential of Utilization of Cotton Stalk Residues In Particleboard Production [Volume 32, Issue 4, 2017-2018, Pages 462-472]
Strength
Investigation on the properties of polypropylene/old corrugated container fibers composites with added foaming agents [Volume 27, Issue 3, 2012-2013, Pages 445-460]
Strength
The influence of pre-hydrolysis on the delignification of Hornbeam wood [Volume 33, Issue 3, 2018-2019, Pages 359-369]
Strength
The Influence of Alkalinity in Oxygen Delignification of Soda/AQ Pulp From
Old Corrugated Container [Volume 26, Issue 2, 2011-2012, Pages 232-242]
Strength
Investigation on production of bleachable chemi-mechanical pulp from
wheat straw [Volume 26, Issue 4, 2011-2012, Pages 634-646]
Strength
Investigation on the influence of cooking intensity on strength
properties of bagasse soda pulp [Volume 24, Issue 2, 2009-2010, Pages 275-284]
Strength
The effect of nanoclay contents on properties of WPC made of MDF and particleboard wastes with recycled polyethylene and polypropylene [Volume 35, Issue 1, 2020-2021, Pages 1-10]
Strength
Investigation of the effect of waste paper fibers on the fracture behavior of fiber-gypsum board [Volume 38, Issue 3, 2023-2024, Pages 193-204]
Strength properties
The utilization of two recycled polymers and bagasse fiber in wood
plastic nano / clay composites production [Volume 28, Issue 3, 2013-2014, Pages 435-450]
Strength properties
Comparison of hot water and alkaline pre-treatments on the properties
of wheat straw NSSC pulp [Volume 28, Issue 4, 2013-2014, Pages 774-794]
Strength properties
The influence of fiber lignin content on mechanical properties of wood
fiber-polypropylene composites [Volume 29, SPRING 1, 2014-2015, Pages 1-11]
Strength properties
Improvement of printing and writing paper properties using PCC Filler Modified by cationic starch modified precipitated calcium carbonate filler [Volume 29, WINTER 4, 2014-2015, Pages 515-525]
Strength properties
Preparation of nano-cellulose from cladophora, a fibrous algae, utilizing it at improving the strength properties of CMP pulp. [Volume 31, Issue 4, 2016-2017, Pages 695-702]
Strength properties
The Effect of Cationic – Anionic Starch Multilayers Formation upon CMP Fibers on Pulp and Paper Properties [Volume 32, Issue 1, 2017-2018, Pages 57-68]
Strength properties
Potential of CMP pulp production of Salix species in comparison with Populus [Volume 32, Issue 4, 2017-2018, Pages 585-595]
Strength properties
Properties of high quality paper from rag fibers recycling [Volume 27, Issue 3, 2012-2013, Pages 434-444]
Strength properties
Improvement of the properties of Poplar chemi-mechanical newsprint through controlling process parameters [Volume 33, Issue 2, 2018-2019, Pages 290-299]
Strength properties
Comparing four lignocellulosic materials in the properties of
wood plastics/ nanoclay composites [Volume 27, Issue 2, 2012-2013, Pages 235-255]
Strength properties
Comparing the effect of alkali charge and treatment time on the properties of
bagasse and eastern cottonwood cold soda pulp [Volume 27, Issue 1, 2012-2013, Pages 16-26]
Strength properties
Effect of anthraquinone on NSSC pupling of P.deltoides [Volume 26, Issue 4, 2011-2012, Pages 622-633]
Strength properties
Comparison of the Effect of Using Cellulose Nanofibers and Cationic Starch instead of Refining on the Physical and Mechanical Properties of Manufacture Paper from OCC pulp [Volume 33, Issue 4, 2018-2019, Pages 593-605]
Strengths
The Influence of Silica Content on Mechanical Properties of Polypropylene/Wood Powder/Silica Composite [Volume 27, WINTER 4, 2012-2013, Pages 595-605]
Stress
Investigation on the stress relaxation behavior of milled
newsprint filled polyethylene composite [Volume 27, Issue 2, 2012-2013, Pages 226-234]
Stress
Stress analysis and failure prediction in dowel joint by FEM [Volume 26, Issue 4, 2011-2012, Pages 708-718]
Stress wave
Investigation on biomechanical properties of pinus nigra Using stress wave technique and resistography [Volume 36, Issue 2, 2021-2022, Pages 144-156]
Stress waves velocity
Detection and differentiation of the beech tree knot (Fagus orientalis Libsky) by non-destructive stress wave method [Volume 37, Issue 4, 2022-2023, Pages 282-292]
Structural characterization
Qualitative Structural Characterization of Two Lignin Samples and Quantitative Determination of Hydroxyl and Methoxyl Functional Groups in Kraft Lignin via Acetylation [Volume 32, Issue 3, 2017-2018, Pages 369-381]
Structural equation modeling
Study of Relationship of Aligning Marketing Strategies and Organizational Performance With the mediator role of Supply Chain Performance.Case study: Office Furniture Production Industrial Corporations in Tehran. [Volume 31, Fall 3, 2016-2017, Pages 522-540]
Structural equations
The effect of new product layout on customer satisfaction in wooden household furniture industries using structural equations model in Tehran province [Volume 31, Summer 2, 2016-2017, Pages 294-308]
Structural equations
Consumer behaviors in the decision- making process of foreign and domestic household wooden furniture buying [Volume 34, Issue 2, 2019-2020, Pages 167-179]
Styrene
Physical and Mechanical Properties of Acrylated Epoxidized Soybean Oil- Wheat Straw Composite [Volume 37, Issue 4, 2022-2023, Pages 330-345]
Sub-indices
Applying analytical hierarchy process in ranking of the effective indices on competitiveness of the wooden furniture industry in Iran [Volume 30, WINTER 4, 2015-2016, Pages 578-594]
Sugarcane
Papermaking aspects of five common varieties of sugarcane in Iran [Volume 27, Issue 1, 2012-2013, Pages 114-128]
Sunflower stalk fibers
Influence of nano metals oxide treatment on medium density fiberboard properties made of sunflower straw fibers [Volume 30, SPRING 1, 2015-2016, Pages 97-109]
Sunflower stem
Evaluation of composite properties made of sunflower stem flour and natural poly lactic acid (PLA) polymer [Volume 33, Issue 3, 2018-2019, Pages 391-401]
Superhydrophobic
Fabrication of Durable, Super-hydrophobic and Self-cleaning Wood Surfaces Based on Silica-Carnauba Wax, Nano-hybrid coating into Epoxy resin matrix [Volume 38, Issue 4, 2023-2024, Pages 281-295]
Supply Chain
Evaluation of the effective indexes on industrial buyer satisfaction in the supply chain of the home wooden furniture industry in Tehran province [Volume 30, Fall 3, 2015-2016, Pages 475-490]
Supply Chain
Effective indicators for the stability of a stable supply chain model in the cellulosic industry by Vickor method. [Volume 39, Issue 1, 2024-2025, Pages 12-26]
Surface bond strength
Investigation of gluability and wettability properties of Medium Density Fiberboard produced using vine pruning fibers in combination with wood fibers [Volume 30, Summer 2, 2015-2016, Pages 289-298]
Surface checks
Numerical and experimental establishment of kiln drying schedule for Iranain beech based on diffusion theory [Volume 32, Issue 4, 2017-2018, Pages 486-497]
Surface coating
Surface Coating of Acrylic acid-Chitosan Nano Hydrogel on Water Uptake, strengths and Optical Properties of Paper [Volume 34, Issue 1, 2019-2020, Pages 1-11]
Surface cracking
Study of thermal fatigue on the cracking, adhesion and gloss properties of wood coatings [Volume 36, Issue 2, 2021-2022, Pages 119-131]
Surface hardness
Investigation on the feasibility of utilization wood and OCC fiber on the surface
layer of particleboard and their effects on surface hardness and roughness [Volume 25, Issue 1, 2010-2011, Pages 62-69]
Surface modification
The influence of reinforcement of polyvinyl acetate adhesive (PVAc) with carbon nanofiber (CNF) on the bending moment capacity of the corner joint of the furniture [Volume 34, Issue 2, 2019-2020, Pages 242-254]
Surface roughness
Different CNC machining condition of paulownia wood by CNC;
Influence on the abbott roughness parameters [Volume 28, Summer 2, 2013-2014, Pages 301-312]
Surface roughness
Investigation on the feasibility of utilization wood and OCC fiber on the surface
layer of particleboard and their effects on surface hardness and roughness [Volume 25, Issue 1, 2010-2011, Pages 62-69]
Surface treatment
Effect of wheat straw surface treatment by using amino silane coupling agent on properties of amino plastic resin-bonded wheat straw particle boards [Volume 26, Issue 1, 2011-2012, Pages 128-137]
Surface Wettability
Heat treatment of wood in dry medium and investigation on its effect on surface wettability and adhesion strength of coating [Volume 31, Summer 2, 2016-2017, Pages 362-373]
Surfactant
Comparing the Performance of the Combination of Surfactant and Soap
in Wastepaper Deinking [Volume 30, SPRING 1, 2015-2016, Pages 26-36]
Sustainable Supply Chain Management
Prioritization of factors affecting sustainable supply chain management and performance in Iran wooden furniture industry
(Case study: companies producing home and office furniture) [Volume 38, Issue 1, 2023-2024, Pages 1-20]
Sweet locust
Comparative GC/MS analysis of chemical components in wood extracts
of Sweet Locust and False Acacia [Volume 28, Issue 4, 2013-2014, Pages 755-762]
SYAHKAL
THE EFFECT OF SIT CONDITION ON SOME MECHANICAL PROPERTIES OF PICEA ABIES WOOD IN TWO REGIONS [Volume 21, No., 1, 2006-2007, Pages 9-21]
Sycamore (Platanus orientalis) tree
Identification and comparison of organic chemical components in leaves of the planted Elder Pine (Pinus eldarica) and Sycamore (Platanus orientalis) using GC-MS methods [Volume 37, Issue 3, 2022-2023, Pages 261-270]
Sycamore tree (Platanus orientalis)
Identification and Comparison of the Extractives Chemical Components in Wood and Bark of Planted sycamore Tree (Platanus orientalis) by GC-MS Methods [Volume 37, Issue 3, 2022-2023, Pages 229-238]
Synergism
Laboratory Study of Synergistic Effects of Mixtures of Organic Biocides, Metal Chelator and Antioxidant Materials against Rainbow White-rot Fungus [Volume 32, Issue 3, 2017-2018, Pages 422-435]
T
Tajan wheat straw
Studying from the Properties of Chemi-Mechanical Pulping and Alkaline Peroxide Mechanical Pulping of Wheat Straw Golestan province [Volume 25, Issue 1, 2010-2011, Pages 32-47]
Talc
Comparison of filler type performance on paper properties in the presence of cationic rosin sizing agent [Volume 32, Issue 2, 2017-2018, Pages 215-226]
TAMARI
THE EFFECT OF RESIN CONTENT AND PRESS TIME ON PROPERTIES OF PARTICLEBOARD PRODUCTION FROM SOUTHERN LIGNOCELLULOSIC MATERIALS IN IRAN [Volume 20, No., 1, 2005-2006, Pages 47-64]
Tamarix
investigation of properties of wood from three tamarix species (T. meyeri, T. aphylla and T. stricta) [Volume 2, 2- No 166, 1996, Pages 152-188]
T. aphylla and T. stricta
investigation of properties of wood from three tamarix species (T. meyeri, T. aphylla and T. stricta) [Volume 2, 2- No 166, 1996, Pages 152-188]
Tapioca
Comparing the performance of cationic starch, corn and tapioca to improve the strength characteristics of paper from old corrugated containers [Volume 31, Issue 4, 2016-2017, Pages 662-670]
TCF
Investigation and Comparison of Bagasse Soda Pulps Properties Bleached with Total Chlorine Free (TCF) and Elemental Chlorine Free (ECF) Stages [Volume 32, Issue 4, 2017-2018, Pages 473-485]
TCF Bleaching
Investigation of Optical and Mechanical Properties of Bleached Chemi-mechanical Pulps (CMP) with Oxygen, Hydrogen Peroxide and Sodium Dithionite Stages [Volume 32, Issue 3, 2017-2018, Pages 311-321]
TDS
Effect of Nano TiO2 on Properties of Old Corrugated Paper Recycling Waste Water [Volume 29, WINTER 4, 2014-2015, Pages 526-237]
Tea
Effects of plant dyes ( walnut shell , tea plant , henna ) on paper's stability in manuscript restoration [Volume 26, Issue 4, 2011-2012, Pages 647-666]
TEAR
INVESTIGATION OF PROPERTIES OF ETHANOL-ALKALI, KRAFT AND SODA PULPS PREPARED FROM WHEAT STRAW [Volume 21, No., 2, 2006-2007, Pages 105-114]
TEAR INDEX
Investigation the properties of radiata pine (pinus radiata)
wood kraft pulp and paper [Volume 28, Issue 4, 2013-2014, Pages 685-690]
TEAR INDEX
Investigation of lignification and paper making characteristics of populus deltoids col. 77.51 grown under 3 rotation [Volume 16, 16-No. 293, 2002-2003, Pages 1-28]
Tehran
Investigating the Status of Enterprise Entrepreneurship in Public and Private Companies Furniture [Volume 33, Issue 4, 2018-2019, Pages 522-530]
Temperature.
Treatability of Beech and Pine Wood with Pyrolysis Acid Made from Different species of Wood [Volume 35, Issue 1, 2020-2021, Pages 88-101]
Temperature dropping
Thermography as a non-Destructive method in evaluation of wood density for Oak and Beech [Volume 34, Issue 1, 2019-2020, Pages 89-99]
Temperature profile
Investigation on the heat transfer and evolution of temperature gradient through wood during drying; Case study: beech (Fagus orientalis) and spruce (Picea abies) [Volume 25, Issue 2, 2010-2011, Pages 234-247]
Temprature time
The effect of press temperature and press time on Medium Density Fiberboard (MDF) properties produced from EucalyptusIntertexta fibers [Volume 24, Issue 1, 2009-2010, Pages 26-35]
Tensile
Investigation on the effect of using PAE and CMC dual system on dry
and wet strength properties of tissue papers [Volume 28, Issue 3, 2013-2014, Pages 451-462]
TENSILE STRENGHT
THE COMPARATIVE OF EFFECTS OF CELLULOSIC MATERIALS IN DIFFERENT LEVELS OF MAPP IN WOOD FIBER- FLOUR/ POLYPROPYLENE COMPOSITES [Volume 19, No., 1, 2004-2005, Pages 49-68]
Tension strength
Compression and tension strength properties of detachable joints in MDF and particleboard [Volume 34, Issue 2, 2019-2020, Pages 205-216]
TERMITE
Study on Termites Resistance of Oak Wood by Field test stakes [Volume 22, Issue 1, 2007-2008, Pages 62-72]
TERMITE
INVETIGATION ON DURABILITY OF EUCALYPTUS WOOD (E. INTERTEXTA R. T.BAKER) BY FIELD TEST STAKES [Volume 21, No., 1, 2006-2007, Pages 52-60]
Test Liner
Sizing Mechanism of Recycled Test Liner Using Poly Aluminum Chloride and Rosin under Neutral Condition [Volume 23, Issue 1, 2008-2009, Pages 40-49]
Tetramethyleamonium hydroxide
Study of Organic Bases Potential in Bagasse Pulping [Volume 22, Issue 2, 2007-2008, Pages 73-80]
Texon paper
Influences of Acetylation on Water Absorption and Dimensional Stability of Manufactured Paper [Volume 22, Issue 2, 2007-2008, Pages 99-108]
TGA
Thermal analysis by TGA and DTA method of wood-polymer of furfurylated beech and fir wood [Volume 33, Issue 4, 2018-2019, Pages 501-510]
The physical and mechanical properties
The possibility of using waste tire particles for oriented strand board production [Volume 37, Issue 2, 2022-2023, Pages 113-127]
Thermal modification
Effect of thermal modification on the practical properties of horn beam bark flour-polypropylene composites [Volume 31, Summer 2, 2016-2017, Pages 280-293]
Thermal modification
Effect of thermal modification on physical and mechanical behavior of sunflower-polypropylene composites [Volume 32, Issue 3, 2017-2018, Pages 392-401]
Thermal properties
The Effect of Micro-Cellulose Length on Mechanical, Thermal and Morphological Properties in Nano/Wood Plastics Composites [Volume 31, SPRING 1, 2016-2017, Pages 154-165]
Thermal properties
Investigating the effect of butanediol diglycidyl ether on the crosslinking of nanocellulose [Volume 33, Issue 2, 2018-2019, Pages 300-310]
Thermal stability
Effect of thermal modification on physical and mechanical behavior of sunflower-polypropylene composites [Volume 32, Issue 3, 2017-2018, Pages 392-401]
Thermal treatment
The effects of thermal treatment and resin type on physical and
mechanical properties of Kenaf stalk particleboard [Volume 28, Summer 2, 2013-2014, Pages 313-328]
Thermal treatment
Densification of Paullownia wood by using of hot-press [Volume 23, Issue 2, 2008-2009, Pages 136-148]
Thermal treatment
Effect of heat treatment and boric acid impregnation on the properties and fire resistance of poplar and radiata pine wood [Volume 38, Issue 1, 2023-2024, Pages 75-86]
Thermography
Thermography as a non-Destructive method in evaluation of wood density for Oak and Beech [Volume 34, Issue 1, 2019-2020, Pages 89-99]
Thermo-Mechanical Pulp
Biotechnology Application in Wood Industry: Utilization of Phenol
Oxidase Enzyme as a Renewable Binder in MDF Manufacture [Volume 27, Issue 2, 2012-2013, Pages 275-293]
Thermoplastic elastomer
Investigation on possibility of making a Nano composite consist of Pebax and Nano cellulose [Volume 31, SPRING 1, 2016-2017, Pages 92-104]
Thermoplastic starch polymer
Effects of Nano Cellulose and Nano Clay on Properties of Biodegradable Composites Made of Recycled Polymers and Industrial Saw Dust [Volume 34, Issue 3, 2019-2020, Pages 337-348]
Thiabendazole
Improvement of the weathering resistance of wood /polyethylene composite using carbamate derivatives (IPBC) and Thiabendazole preservative materials [Volume 28, SPRING 1, 2013-2014, Pages 123-133]
Thickness swelling
The effects of thermal treatment and resin type on physical and
mechanical properties of Kenaf stalk particleboard [Volume 28, Summer 2, 2013-2014, Pages 313-328]
Thickness swelling
Investigation on the influence of the density reduction of the particleboard by
canola residues on the properties of particleboard [Volume 28, Issue 3, 2013-2014, Pages 463-475]
Thickness swelling
Investigating the possibility of particleboard manufacture using corn
(zea mays) stalks [Volume 28, Issue 4, 2013-2014, Pages 608-627]
Thickness swelling
Physical and mechanical properties of wood-plastic composite made of
Canola stem residues and polypropylene [Volume 28, Issue 4, 2013-2014, Pages 628-641]
Thickness swelling
Investigation physical properties and decay resistance of Medium Density Fiberboard sanding powder- polyethylene-nanoclay composite [Volume 29, Summer 2, 2014-2015, Pages 287-298]
Thickness swelling
Utilization of Recycled Polyethylene For Physical & Mechanical Properties Modification of Particleboard [Volume 31, Issue 4, 2016-2017, Pages 557-568]
Thickness swelling
The effect of boric acid on the physical and mechanical properties of particleboard made to Urea-formaldehyde resin (UF) [Volume 31, SPRING 1, 2016-2017, Pages 40-47]
Thickness swelling
urea formaldehyde resin reinforced by silk cocoon [Volume 31, Fall 3, 2016-2017, Pages 500-509]
Thickness swelling
Study on the effect of urea addition to urea-formaldehyde adhesive on physical and mechanical properties of poplar particleboard [Volume 27, WINTER 4, 2012-2013, Pages 649-654]
Thickness swelling
Evaluation of the properties of wood sawdust-cement perforated blocks [Volume 27, Issue 2, 2012-2013, Pages 294-305]
Thickness swelling
The impact of reeds residue addition on physical and mechanical properties
of particleboard made from pomegranate prunings [Volume 27, Issue 1, 2012-2013, Pages 38-50]
Thickness swelling
Investigation of applying the old corrugated container (OCC)
and aspen chips in particleboard production [Volume 26, Issue 1, 2011-2012, Pages 138-150]
Thickness swelling
A Study on water absorption and thickness swelling behavior
of wood flour/glass fiber hybrid composites [Volume 24, Issue 2, 2009-2010, Pages 315-321]
Thickness swelling
Investigation Of press Temperature And press Time On Physical And Mechanical Properties Of OSB Board Made of Aspen [Volume 23, Issue 1, 2008-2009, Pages 74-82]
Thickness swelling
The effect of press time and resin content on properties of MDF produced
from Rice straw [Volume 22, Issue 1, 2007-2008, Pages 51-61]
Thickness swelling
Influences of Acetylation on Water Absorption and Dimensional Stability of Manufactured Paper [Volume 22, Issue 2, 2007-2008, Pages 99-108]
Thickness swelling
THE UTILIZATION OF BAGASSE AND LOGGING RESIDUES OF EUCALYPTUS FOR PARTICLEBOARD PRODUCTION [Volume 11, 11-No. 243, 2000-2001, Pages 1-60]
Thickness swelling
STUDY ON THE POSSIBILITY OF MANUFACTURING PARTICLEBOARD WITH PAPER SLUDGE AND WOOD CHIPS [Volume 19, No., 2, 2004-2005, Pages 137-158]
Thickness swelling
INVESTIGATION ON POSSIBILITY OF MDF PRODUCTION FROM REED [Volume 19, No., 2, 2004-2005, Pages 225-242]
Thickness swelling
THE EFFECT OF PRODUCTION VARIABLES ON MEDIUM DENSITY FIBERBOARD QUALITY MADE FROM TALABE -ANZALYE REED [Volume 20, No., 1, 2005-2006, Pages 1-22]
Thickness swelling
A STUDY ON DENSITY PROFILE OF THREE TYPES OF MEDIUM DENSITY FIBERBAORD (MDF) USED IN IRAN MARKET [Volume 20, No., 2, 2005-2006, Pages 285-301]
Thickness swelling
Effect of the presence of tobacco stalk wastes mixed with industrial wood particle on the dimensional stability and mechanical properties of particleboard [Volume 33, Issue 4, 2018-2019, Pages 564-578]
Thickness swelling
Assess the features of puplar plywood using lignin-glyoxal adhessive [Volume 35, Issue 2, 2020-2021, Pages 127-137]
Thiophanate methyl
The assessment of antifungal effect of Thiophanate-methyl on Paper destructive fungi and its application in conservation paper works [Volume 32, Issue 3, 2017-2018, Pages 345-358]
Three-layer particleboard
Investigation on the feasibility of utilization wood and OCC fiber on the surface
layer of particleboard and their effects on surface hardness and roughness [Volume 25, Issue 1, 2010-2011, Pages 62-69]
Thyme
The use of Thyme extract (Zataria Multiflora) to make antibacterial food packaging paper [Volume 39, Issue 1, 2024-2025, Pages 41-54]
Timoshenko beam theory
Nondestructive Evaluation of Effects of Moisture Content and Temperature on the Elastic Properties of Beech Wood Using Flexural Vibration Test [Volume 32, Issue 1, 2017-2018, Pages 13-24]
TIRE TUBE METHOD
PRESERVATIVE TREATMENT OF GREEN POPLAR POLES BY USING TIRE -TUBE METHOD [Volume 19, No., 1, 2004-2005, Pages 97-114]
Tissue Paper
Investigation on the effect of using PAE and CMC dual system on dry
and wet strength properties of tissue papers [Volume 28, Issue 3, 2013-2014, Pages 451-462]
Tissue Paper
Optimization of the performance of PAE resin combined with retention
aid and CMC in tissue paper production using deinked pulp [Volume 28, Issue 3, 2013-2014, Pages 489-497]
Tissue Paper
Optimization Process Variables of Deinked Pulp Bleaching - Improvement of Wet Tensile Strength of Tissue Paper [Volume 30, WINTER 4, 2015-2016, Pages 705-716]
Titanium dioxide
Hydrophobization of Paper Using Organosilane and Titanium Dioxide Nanoparticles with Layer by Layer Method [Volume 32, Issue 4, 2017-2018, Pages 530-540]
T. meyeri
investigation of properties of wood from three tamarix species (T. meyeri, T. aphylla and T. stricta) [Volume 2, 2- No 166, 1996, Pages 152-188]
Tobacco )Nicotiana tabacum L. 'Coker 347'(
Anatomical, morphological and chemical properties of Tobacco stalk
(Nicotiana tabacum L.) [Volume 27, Issue 3, 2012-2013, Pages 495-509]
Tobacco stalks soda pulp
Investigation on TCF Bleaching of Tobacco stalk ( Nicotiana tabacum L.'Coker 347') Soda Pulp [Volume 29, WINTER 4, 2014-2015, Pages 623-632]
Tobacco stalk waste
Effect of the presence of tobacco stalk wastes mixed with industrial wood particle on the dimensional stability and mechanical properties of particleboard [Volume 33, Issue 4, 2018-2019, Pages 564-578]
Tomography
Development of Tomographic Technology (Case Study: Trees from Karaj City) [Volume 33, Issue 1, 2018-2019, Pages 100-111]
TOPSIS method
Identifying and ranking of factors affecting customer satisfaction of
the household wood furniture industry by Multi-Attribute Decision making method
(Case Study: home furniture) [Volume 28, Issue 4, 2013-2014, Pages 691-708]
TRACHIED LENGTH
INVESTIGATION ON TRACHIEDS CHARACTERISTICS OF PINUS TEADA [Volume 19, No., 1, 2004-2005, Pages 25-48]
TRAMETES VERSICOLOR
Effect of silica dioxide on natural resistance and morphological study of wood plastic composite against of white rot fungi (Trametes Versicolor) [Volume 31, SPRING 1, 2016-2017, Pages 14-29]
TRAMETES VERSICOLOR
Laboratory Study of Synergistic Effects of Mixtures of Organic Biocides, Metal Chelator and Antioxidant Materials against Rainbow White-rot Fungus [Volume 32, Issue 3, 2017-2018, Pages 422-435]
TRAMETES VERSICOLOR
Effects of Fungus Trametes versicolor and Coniophora puteana study,on
the Mass loss of Wood/Polypropylene Composites. [Volume 25, Issue 1, 2010-2011, Pages 102-112]
TRAMETES VERSICOLOR
RELATIONSHIP BETWEEN WOOD EXTRACTIVES AND WOOD DECAY [Volume 18, No. 2, 2003-2004, Pages 139-154]
Trametes vesicolor
Delignification of CMP pulp with Terametes versicolor [Volume 24, Issue 2, 2009-2010, Pages 307-314]
Transmission electron microscopy (TEM)
The effect of adding zinc oxide nanoparticles on color change and adhesion strength of polyurethane coating on wood surface [Volume 30, WINTER 4, 2015-2016, Pages 690-704]
TRANSPARENCY
Evaluation of the refining effects on the properties of transparent
paper produced from bagasse fiber [Volume 29, Fall 3, 2014-2015, Pages 484-492]
Transparent coat
Heat treatment of wood in dry medium and investigation on its effect on surface wettability and adhesion strength of coating [Volume 31, Summer 2, 2016-2017, Pages 362-373]
Transparent coatings
Investigation on the effect of different methods of applying transparent coatings on adhesion strength of coating in wooden surfaces [Volume 31, Summer 2, 2016-2017, Pages 248-260]
Treatment
THE EFFECT OF MARINE BORERS ATTACK ON SEVEN IRANIAN WOOD SPECIES IN BANDAR ABBAS COASTS [Volume 17, 17-No. 300, 2002-2003, Pages 57-72]
Treatment
RESISTANCE OF BEECH, OAK AND HORNBEAM WOOD SPECIES AGAINST MARINE BORERS IN BOSHEHR PORT COASTS IN PERSIAN GULF [Volume 18, No. 1, 2003-2004, Pages 63-76]
Treatment
RESISTANCE OF SOME IRANIAN HARDWOODS AGAINST MARINE BORERS IN BOSHEHR PORT COAST (PERSIAN GULF) [Volume 19, No., 1, 2004-2005, Pages 115-131]
Treatment
RESISTANCE OF SOME IRANIAN HARDWOODS AGAINST MARINE BORERS IN MAHSHAHR (PERSIAN GULF), BANDAR TORKMAN AND NOSHAHR (CASPIAN SEA) COASTS [Volume 19, No., 2, 2004-2005, Pages 193-210]
Treatment
The effect of Benomyl antifungal on the gall ink used in historical documents [Volume 34, Issue 2, 2019-2020, Pages 276-289]
Treatment
The effect of cellulose nanofibers treatment on the discoloration of historical papers [Volume 37, Issue 1, 2022-2023, Pages 73-85]
Tree
Development of Tomographic Technology (Case Study: Trees from Karaj City) [Volume 33, Issue 1, 2018-2019, Pages 100-111]
Tree ring
Dendrochronological studies of Juniperus polycarpos in alborz mountains
(case study: Shahkuh of shahrood) [Volume 29, SPRING 1, 2014-2015, Pages 94-105]
Tree ring
Effects of climate variables (temperature and precipitation) on annual growth
of Zelkova carpinifolia [Volume 27, Issue 1, 2012-2013, Pages 69-80]
Trimethoxymethylsilane
Barrier and Structural Properties of Coated Trimethoxymethylsilane Layer
on Coated Paper with Ethylene Vinyl Alcohol [Volume 34, Issue 2, 2019-2020, Pages 255-262]
TRUNK
COMPARATIVE INVESTIGATION ON FIBER DIMENSIONS OF TRUNK AND BRANCH WOOD OF CARPINUS BETULUS L. [Volume 19, No., 2, 2004-2005, Pages 243-254]
TS
Effect of Nano TiO2 on Properties of Old Corrugated Paper Recycling Waste Water [Volume 29, WINTER 4, 2014-2015, Pages 526-237]
T-shaped joint
Investigation of withdrawal resistance of reinforced T-shaped joint with fiber reinforced composites [Volume 35, Issue 3, 2020-2021, Pages 294-305]
TSS
Effect of Nano TiO2 on Properties of Old Corrugated Paper Recycling Waste Water [Volume 29, WINTER 4, 2014-2015, Pages 526-237]
Turbidity
Effect of Nano TiO2 on Properties of Old Corrugated Paper Recycling Waste Water [Volume 29, WINTER 4, 2014-2015, Pages 526-237]
Turbidity
ontrol of micro-stickies originated from recycling of Old Corrugated Containers (OCC) using some selected chemical and physical methods [Volume 38, Issue 2, 2023-2024, Pages 155-169]
TWO HALF LAMINATED SLEEPERS
INVESTIGATION ON DESIGN AND FABRICATION OF TWO HALF LAMINATED SLEEPERS IN COMPARION WITH CONVENTIONAL TYPE [Volume 12, 12-No. 251, 2000-2001, Pages 39-72]
TWO- YEAR- OLD POPLAR
THE SUITABILITY OF TWO- YEAR- OLD POPLAR CLONES FOR PRODUCTION OF PARTICLEBOARD [Volume 19, No., 1, 2004-2005, Pages 1-24]
U
UF
The effects of thermal treatment and resin type on physical and
mechanical properties of Kenaf stalk particleboard [Volume 28, Summer 2, 2013-2014, Pages 313-328]
UF
Effect of UF and MUF resins on the practical properties of particleboard produced
from rice straw and aspen particles [Volume 25, Issue 2, 2010-2011, Pages 321-331]
UF RESIN
The Effects of Some Production Variables on Physical and Mechanical Properties of Particleboard Made of Alnus subcordata by UF and MUF resin [Volume 25, Issue 2, 2010-2011, Pages 201-210]
UF RESIN
THE SUITABILITY OF TWO- YEAR- OLD POPLAR CLONES FOR PRODUCTION OF PARTICLEBOARD [Volume 19, No., 1, 2004-2005, Pages 1-24]
UF RESIN
Influence of modified graphite on formaldehyde emission from medium density fiberboard ( MDF) [Volume 35, Issue 4, 2020-2021, Pages 348-361]
Ulmus carpinifolia
Comparative wood anatomy of Wych Elm, English Elm,
Caucasian Elm and Hackberry [Volume 26, Issue 3, 2011-2012, Pages 564-578]
Ulmus compestris
Morphological and chemical components of Ulmus glabrar, Ulmus compestris, Zelkova carpinifolia, Celtis australis [Volume 25, Issue 2, 2010-2011, Pages 248-259]
Ulmus glabrar
Comparative wood anatomy of Wych Elm, English Elm,
Caucasian Elm and Hackberry [Volume 26, Issue 3, 2011-2012, Pages 564-578]
Ulmus glabrar
Morphological and chemical components of Ulmus glabrar, Ulmus compestris, Zelkova carpinifolia, Celtis australis [Volume 25, Issue 2, 2010-2011, Pages 248-259]
Ultimate bending strength
A Study of the Effects of height and Thickness of Tenon Made Out of Beech and Hornbeam on bending Strength of Mortise and tenon joint [Volume 25, Issue 1, 2010-2011, Pages 128-137]
Ultrasonic
Use of Central Composite Design for Optimization of ultrasonic pre-treatment parameters on chemical deinking of old newspaper [Volume 33, Issue 4, 2018-2019, Pages 489-500]
Ultrasonic
The use of Thyme extract (Zataria Multiflora) to make antibacterial food packaging paper [Volume 39, Issue 1, 2024-2025, Pages 41-54]
Ultrasonic treatment
Preparation of nano-cellulose from cladophora, a fibrous algae, utilizing it at improving the strength properties of CMP pulp. [Volume 31, Issue 4, 2016-2017, Pages 695-702]
Ultrasonic wave
RELATIONSHIP BETWEEN MOISTURE CONTENT AND ULTRASONIC WAVE SPEED DURING KILN DRYING OF BASSWOOD LUMBER [Volume 21, No., 1, 2006-2007, Pages 1-8]
Ultrasonic wave
Improved adsorption performance of sawdust by ultrasonic wave: Optimization through response surface methodology, kinetic and thermodynamic studies [Volume 34, Issue 1, 2019-2020, Pages 12-26]
Ultrasonic waves
Evaluation of Mechanical Properties of Homogeneous and layering Particleboards by Ultrasonic Technique [Volume 30, Summer 2, 2015-2016, Pages 341-349]
Unbleached chemimechanical pulp
Investigation on the effect of acetylation and reduction treatments on the chromophore groups of isolated lignin from unbleached hardwoods chemimecanical pulp using FT-IR spectroscopy [Volume 29, SPRING 1, 2014-2015, Pages 79-93]
UNISERIATE
STUDY ON COTTON STEM FOR CELLULOSIC INDUSTRIES [Volume 18, No. 2, 2003-2004, Pages 239-267]
UNISERIATE RAY
COMPARATIVE INVESTIGATION ON THE ANATOMICAL, PHYSICAL AND CHEMICAL CHARACTERISTICS OF ZIZIPHUS LOTUS (L.) LAM. FROM TWO REGION IN IRAN [Volume 18, No. 1, 2003-2004, Pages 109-133]
Unolith Cement Wood
Investigation of composite of three layers of cement and ionolite [Volume 35, Issue 1, 2020-2021, Pages 113-125]
Upholstered furniture
Investigation on withdrawal capacity of staple in the upholstered furniture frame made of LVL [Volume 32, Issue 2, 2017-2018, Pages 171-180]
Urea
Study on the effect of urea addition to urea-formaldehyde adhesive on physical and mechanical properties of poplar particleboard [Volume 27, WINTER 4, 2012-2013, Pages 649-654]
UREA FORMALDEHYDE
Investigation of mechanical properties particleboard based on canola stalks and poplar wood by Response Surface Method (RSM) [Volume 30, Summer 2, 2015-2016, Pages 230-242]
UREA FORMALDEHYDE
The effect of boric acid on the physical and mechanical properties of particleboard made to Urea-formaldehyde resin (UF) [Volume 31, SPRING 1, 2016-2017, Pages 40-47]
UREA FORMALDEHYDE
Study on the effect of urea addition to urea-formaldehyde adhesive on physical and mechanical properties of poplar particleboard [Volume 27, WINTER 4, 2012-2013, Pages 649-654]
UREA FORMALDEHYDE
Effect of wheat straw surface treatment by using amino silane coupling agent on properties of amino plastic resin-bonded wheat straw particle boards [Volume 26, Issue 1, 2011-2012, Pages 128-137]
UREA FORMALDEHYDE
Utilization of waste paper and old corrugated carton (OCC) as a filler of urea formaldehyde resin on plywood manufacturing [Volume 26, Issue 2, 2011-2012, Pages 271-280]
UREA FORMALDEHYDE
Investigation on the effect of acetylation and the resin type on the biological resistance of aspen tree layered particleboard [Volume 26, Issue 3, 2011-2012, Pages 466-476]
UREA FORMALDEHYDE
Utilization of date palm and kenaf fibers for reinforcement of
practical properties of plywood [Volume 26, Issue 3, 2011-2012, Pages 495-510]
UREA FORMALDEHYDE
Creep behavior of the composites made from creep behavior of the composites made from waste materials of OCC recycling mills [Volume 26, Issue 4, 2011-2012, Pages 798-810]
UREA FORMALDEHYDE
Investigation Of press Temperature And press Time On Physical And Mechanical Properties Of OSB Board Made of Aspen [Volume 23, Issue 1, 2008-2009, Pages 74-82]
UREA FORMALDEHYDE
THE UTILIZATION OF BAGASSE AND LOGGING RESIDUES OF EUCALYPTUS FOR PARTICLEBOARD PRODUCTION [Volume 11, 11-No. 243, 2000-2001, Pages 1-60]
UREA FORMALDEHYDE
Evaluation of sandwich panels from palm leaves waste and plywood [Volume 38, Issue 1, 2023-2024, Pages 48-58]
UREA-FORMALDEHYDE
Investigation of applying the old corrugated container (OCC)
and aspen chips in particleboard production [Volume 26, Issue 1, 2011-2012, Pages 138-150]
UREA-FORMALDEHYDE
Lateral holding strength of wooden dowel, screw and ready-to-assemble joints
(RTA joints) constructed of Medium Density Fiberboard (MDF) [Volume 24, Issue 2, 2009-2010, Pages 219-231]
UREA-FORMALDEHYDE
STUDY ON THE POSSIBILITY OF MANUFACTURING PARTICLEBOARD WITH PAPER SLUDGE AND WOOD CHIPS [Volume 19, No., 2, 2004-2005, Pages 137-158]
UREA-FORMALDEHYDE
THE EFFECT OF RESIN CONTENT AND PRESS TIME ON PROPERTIES OF PARTICLEBOARD PRODUCTION FROM SOUTHERN LIGNOCELLULOSIC MATERIALS IN IRAN [Volume 20, No., 1, 2005-2006, Pages 47-64]
UREA-FORMALDEHYDE
Effect of soy flour addition into urea-formaldehyde resin on formaldehyde emission [Volume 34, Issue 3, 2019-2020, Pages 387-396]
UREA-FORMALDEHYDE
Assess the features of puplar plywood using lignin-glyoxal adhessive [Volume 35, Issue 2, 2020-2021, Pages 127-137]
Urea Formaldehyde adhesive
Investigating of the effect of using bagasse and isocyanate adhesive on the 3-layer particleboard manufacturing [Volume 26, Issue 2, 2011-2012, Pages 300-313]
Urea formaldehyde resin
Effect of silane coupling agent on bond improvement of urea formaldehyde resin in wheat straw particleboard [Volume 29, Summer 2, 2014-2015, Pages 183-189]
Urea formaldehyde resin
Improving the mechanical and physical of wheat straw particleboard using polypropylene powder [Volume 29, Fall 3, 2014-2015, Pages 464-473]
Urea formaldehyde resin
urea formaldehyde resin reinforced by silk cocoon [Volume 31, Fall 3, 2016-2017, Pages 500-509]
Urea formaldehyde resin
Evaluation the physical and mechanical properties of the boards manufactured by mixture of wheat straw and tobacco stalk [Volume 32, Issue 4, 2017-2018, Pages 576-584]
Urea formaldehyde resin
Making wheat straw particleboards by using mixture of MF and UF resins [Volume 25, Issue 2, 2010-2011, Pages 291-301]
Urea formaldehyde resin
Effect of Acetylation on Physical and Mechanical Properties of Prticleboard [Volume 22, Issue 1, 2007-2008, Pages 18-28]
Urea formaldehyde resin
Effect of the presence of tobacco stalk wastes mixed with industrial wood particle on the dimensional stability and mechanical properties of particleboard [Volume 33, Issue 4, 2018-2019, Pages 564-578]
Urea formaldehyde resin
Effect of Adding Several Graphite-Based Materials to Urea Formaldehyde Adhesive on Thermal and Mechanical Properties of MDF board [Volume 38, Issue 2, 2023-2024, Pages 100-113]
UREAFORMALDEYIDE
INVESTIGATION ON THE POSSIBILITY OF PARTICLEBOARD PRODUCTION FROM LIGNOCELLULOSIC SOURCES IN SOURTHERN REGION OF IRAN (2) REPORT 2: THE POTENTIAL OF DATE PALM RESIDUES AND PROSOPIS (MESQUITE) WOOD IN PARTICLEBOARD INDUSTRY [Volume 15, 15-No. 278, 2001-2002, Pages 61-87]
V
Vaisar region
Engineering properties of Hornbeam wood in Veisar region [Volume 9, 9-No. 225, 2000, Pages 109-149]
Value Added
Investigating the Impact of Monetary Policy on Value Added Growth in Iran's Industrial Sub-Sectors (Positive Mathematical Programming Approach) with Emphasis on Wood industry sub-sector [Volume 34, Issue 4, 2019-2020, Pages 520-534]
Value chain
Prioritize of poplar wood processing industries in the Kurdistan province with the aim of poplar wood value chain upgrading [Volume 32, Issue 2, 2017-2018, Pages 181-192]
VAN AND MAMRAZ
RELATIONSHIP BETWEEN WOOD EXTRACTIVES AND WOOD DECAY [Volume 18, No. 2, 2003-2004, Pages 139-154]
VESSEL
Correlation between vessel features and hardwood drying properties; case study: beech (Fagus orientalis) and oak (Quercus castaneifolia) [Volume 33, Issue 3, 2018-2019, Pages 417-427]
VESSEL
COMPARATIVE INVESTIGATION ON THE ANATOMICAL, PHYSICAL AND CHEMICAL CHARACTERISTICS OF ZIZIPHUS LOTUS (L.) LAM. FROM TWO REGION IN IRAN [Volume 18, No. 1, 2003-2004, Pages 109-133]
VESSEL
COMPARATIVE INVESTIGATION ON THE ANATOMICAL, PHYSICAL AND CHEMICAL CHARACTERISTICS OF ZIZIPHUS SPINA - CHRISTI (L.) WILD FROM TWO REGION IN IRAN [Volume 18, No. 2, 2003-2004, Pages 155-184]
VESSEL
Comparing growth rate, wood fiber biometry, and adaptability of different tamarisk (Tamarix aphylla L.) populations planted in Garmsar [Volume 36, Issue 1, 2021-2022, Pages 26-39]
VESSEL ELEMENTS
STUDY ON COTTON STEM FOR CELLULOSIC INDUSTRIES [Volume 18, No. 2, 2003-2004, Pages 239-267]
V.F
THE EFFECTS OF DENSITY AND PRESS TIME ON POPLAR INSULATION PARTICLEBOARD PROPERTIES [Volume 21, No., 2, 2006-2007, Pages 115-122]
Vibrating antinode
The study of joints in Oak wood beam compared to the location of node and anti-node of longitudinal vibration [Volume 36, Issue 3, 2021-2022, Pages 256-263]
Vibrating nodes
The study of joints in Oak wood beam compared to the location of node and anti-node of longitudinal vibration [Volume 36, Issue 3, 2021-2022, Pages 256-263]
Vibration
The possibility of estimating some of the acoustical properties of particleboards using plate mechanical vibration test [Volume 28, SPRING 1, 2013-2014, Pages 89-96]
Vibration
Nondestructive Evaluation of Effects of Moisture Content and Temperature on the Elastic Properties of Beech Wood Using Flexural Vibration Test [Volume 32, Issue 1, 2017-2018, Pages 13-24]
Vibration
Investigation of relationship between dynamic modulus of elasticity and static bending properties in particleboard plates [Volume 32, Issue 2, 2017-2018, Pages 193-204]
Vickor Approach
Effective indicators for the stability of a stable supply chain model in the cellulosic industry by Vickor method. [Volume 39, Issue 1, 2024-2025, Pages 12-26]
Vine pruning fibers
Investigation of gluability and wettability properties of Medium Density Fiberboard produced using vine pruning fibers in combination with wood fibers [Volume 30, Summer 2, 2015-2016, Pages 289-298]
Virginia
Investigating morphological and chemical characteristics of tobacco stalk [Volume 26, Issue 2, 2011-2012, Pages 339-351]
V-nail
Study on the tensile and compression tension-carrying capacity of corner V-nails [Volume 31, Issue 4, 2016-2017, Pages 621-633]
Volume swelling
Study on Fire-Retarding Properties of Nano-Wollastonite
in Fir Wood (Abies alba) [Volume 28, Summer 2, 2013-2014, Pages 252-265]
W
Warsaw Treaty
The impact of political treaties and domestic and regional events on wood trade (A case study of Iran, Russia and the Warsaw Pact countries) [Volume 33, Issue 1, 2018-2019, Pages 50-62]
Waste fiber
Effects of oxidized recycled fibers on paper properties [Volume 27, Issue 3, 2012-2013, Pages 409-422]
Waste HDPE
Study bhavior creep composites made mixes particle board and medium
density Fiber Board-Recycled from HDPE waste and effect water
fiber board absorption on Composites [Volume 24, Issue 2, 2009-2010, Pages 194-205]
Waste Management
Effect of using waste tire rubber on physical and mechanical properties of Paulownia Oriented strand boards [Volume 36, Issue 1, 2021-2022, Pages 1-13]
Waste MDF
The effect of old corrugated container (OCC) powder and as urea
formaldehyde adhesive filler on properties of medium density
fiberboard made from bagasse and waste MDF [Volume 29, Fall 3, 2014-2015, Pages 452-463]
Waste of boards
The effect of nanoclay contents on properties of WPC made of MDF and particleboard wastes with recycled polyethylene and polypropylene [Volume 35, Issue 1, 2020-2021, Pages 1-10]
Wastes
A STUDY ON THE LONG TERM WATER ABSORPTION AND THICKNESS SWELLING BEHAVIOR OF WOOD-PLASTIC COMPOSITE PANELS [Volume 20, No., 2, 2005-2006, Pages 255-270]
Wastes
MECHANICAL PROPERTIES OF WOOD-PLASTIC COMPOSITE MADE FROM PARTICLEBOARD AND MDF WASTES AND POLYETHYLENE (HDPE) WASTES [Volume 20, No., 2, 2005-2006, Pages 271-284]
Wastes
THE EFFECT OF PRODUCING METHOD ON THE MECHANICAL PROPERTIES OF WOOD PLASTIC COMPOSITES MADE FROM PARTICLEBOARD WASTE [Volume 21, No., 1, 2006-2007, Pages 33-42]
Wastes of OCC paper recycling mills
Creep behavior of the composites made from creep behavior of the composites made from waste materials of OCC recycling mills [Volume 26, Issue 4, 2011-2012, Pages 798-810]
Waste tire particles
The possibility of using waste tire particles for oriented strand board production [Volume 37, Issue 2, 2022-2023, Pages 113-127]
Wastewater treatment
Preparation of adsorbent from recycle newspaper and removal of metal ions from the pulp and paper mills wastewater [Volume 39, Issue 1, 2024-2025, Pages 1-11]
Water
Investigation on Wood Plastic Composite Resistance against Water, Fire and Fungal attack Compared to Untreated Maple and Elm [Volume 22, Issue 2, 2007-2008, Pages 81-98]
Water Absorbtion
Utilization of Recycled Polyethylene For Physical & Mechanical Properties Modification of Particleboard [Volume 31, Issue 4, 2016-2017, Pages 557-568]
Water absorption and thickness swelling
Evaluation of effect of Nano SiO2 on the physical, mechanical and morphological properties of hybrid Nano composite from polypropylene-wood flour [Volume 30, Summer 2, 2015-2016, Pages 266-277]
Water absorption and thickness swelling
Investigating of the effect of using bagasse and isocyanate adhesive on the 3-layer particleboard manufacturing [Volume 26, Issue 2, 2011-2012, Pages 300-313]
Water hardness
Study of using water softening process byproduct, calcium carbonate on fine paper production [Volume 30, SPRING 1, 2015-2016, Pages 14-25]
Water Repellency Efficiency
Changes in Chemical Structure and Hydrophobization of the Paulownia Wood
with Fluorocarbon Resin [Volume 35, Issue 2, 2020-2021, Pages 178-194]
Water vapor permeability
Evaluation of physical and mechanical properties of Nanocomposites made of polyvinyl alcohol - Nanofiber cellulose and Nano silicon dioxide [Volume 36, Issue 1, 2021-2022, Pages 78-89]
Weathering and Discoloration
The Investigation of Acetylation and Anti-Oxidant Effect on Weathering of wood
Plastic Composites By Means of FTIR and Color Metry (Color measurement) [Volume 25, Issue 1, 2010-2011, Pages 70-79]
Weighting
Determination of effective indexes on the purchase and selection of paper in Packaging Industry by Analytical Hierarchy Process (AHP) [Volume 33, Issue 4, 2018-2019, Pages 544-552]
WEIGHT LOSS
Biodegradation and migration behavior of cellulose nanocrystal - nanoclay reinforced PLA composites [Volume 31, SPRING 1, 2016-2017, Pages 130-140]
WEIGHT LOSS
The modifying effect of different Bacillus subtilis strains on permeability of pine (Pinus taeda) in two different culture media [Volume 31, Summer 2, 2016-2017, Pages 309-322]
WEIGHT LOSS
Influence of fungal decay on durability and hardness strength characteristics of bagasse/PP composite [Volume 26, Issue 1, 2011-2012, Pages 173-192]
WEIGHT LOSS
RELATIONSHIP BETWEEN WOOD EXTRACTIVES AND WOOD DECAY [Volume 18, No. 2, 2003-2004, Pages 139-154]
Weight Percent Gain(WPG)
The influence of fiber chemical treatment on prevention of biologic
deterioration of medium density fiberboard (MDF) [Volume 29, Fall 3, 2014-2015, Pages 390-398]
Wet press
Studying the Effect of Pulp Refining and Paper Pressing in Using Nano Fibrillated Cellulose to Improve the CMP Pulp Properties [Volume 31, Summer 2, 2016-2017, Pages 224-236]
Wet tensile index
Optimization Process Variables of Deinked Pulp Bleaching - Improvement of Wet Tensile Strength of Tissue Paper [Volume 30, WINTER 4, 2015-2016, Pages 705-716]
Wet tensile strength
The effect of anionic charge reduction of deinked pulp in Physical Strengths Improvement [Volume 32, Issue 1, 2017-2018, Pages 83-93]
Wetwood
Effect of wetwood and blue stain (Ceratocystis spp.) on the drying rate and fluid transport coefficients of poplar (P. nigra) [Volume 29, WINTER 4, 2014-2015, Pages 572-580]
Wheat
Production of plastic wood nanocomposites using agricultural waste and urban polymer waste [Volume 35, Issue 4, 2020-2021, Pages 392-406]
WHEAT AND BARELY STRAWS
THE EFFECTS OF TWO KINDS OF AGRICULTURAL WASTES (WHEAT AND BARELY STRAWS) ON NRC% OF ASPEN PARTICLEBOARDS [Volume 21, No., 2, 2006-2007, Pages 61-69]
WHEAT STRAW
The manufacture of particleboard using mixture of golestan province wheat straw
and cotton bolls reinforced with nano-clay particles [Volume 28, Summer 2, 2013-2014, Pages 277-289]
WHEAT STRAW
Effect of alkaline pre-treatment on physical, optical and mechanical properties
of semi-chemical NSSC wheat straw pulp [Volume 28, Summer 2, 2013-2014, Pages 366-380]
WHEAT STRAW
Investigation on properties of wood-cement panels based on
Agricultural residues [Volume 28, Issue 3, 2013-2014, Pages 583-896]
WHEAT STRAW
Comparison of hot water and alkaline pre-treatments on the properties
of wheat straw NSSC pulp [Volume 28, Issue 4, 2013-2014, Pages 774-794]
WHEAT STRAW
Effect of boiling water pre-treatment on the yield, physical, optical and mechanical properties of neutral sulfite semi chemical pulp from wheat straw [Volume 29, Fall 3, 2014-2015, Pages 422-433]
WHEAT STRAW
Improving the mechanical and physical of wheat straw particleboard using polypropylene powder [Volume 29, Fall 3, 2014-2015, Pages 464-473]
WHEAT STRAW
Investigation on newsprint paper production from wheat straw and its specification [Volume 30, Summer 2, 2015-2016, Pages 320-329]
WHEAT STRAW
Effect of beating time on properties of soda and monoethanolamine pulp from wheat straw [Volume 32, Issue 1, 2017-2018, Pages 94-105]
WHEAT STRAW
Effect of nanoclay on mechanical properties of HDPE/wheat straw composite [Volume 27, WINTER 4, 2012-2013, Pages 595-605]
WHEAT STRAW
Construction of Particlboard Using Tannin-Based Phenol Adhesive [Volume 27, WINTER 4, 2012-2013, Pages 655-663]
WHEAT STRAW
Evaluation the physical and mechanical properties of the boards manufactured by mixture of wheat straw and tobacco stalk [Volume 32, Issue 4, 2017-2018, Pages 576-584]
WHEAT STRAW
Study of variation trends of fiber dimensions in longitudinal direction
of Zagross wheat straw in Golestan province for papermaking [Volume 27, Issue 3, 2012-2013, Pages 545-555]
WHEAT STRAW
The Effect of Lignocellulosic Material and Nanoclay on Physical, Mechanical and Morphological Properties of Wood Plastic Composite [Volume 27, Issue 2, 2012-2013, Pages 189-201]
WHEAT STRAW
Study on production of fluting paper from wheat straw soda – AQ pulp and OCC pulp blends [Volume 26, Issue 2, 2011-2012, Pages 387-397]
WHEAT STRAW
Investigation on production of bleachable chemi-mechanical pulp from
wheat straw [Volume 26, Issue 4, 2011-2012, Pages 634-646]
WHEAT STRAW
Investigation lignin dissolution at pulping process of wheat straw [Volume 25, Issue 2, 2010-2011, Pages 302-308]
WHEAT STRAW
INVESTIGATION ON THE POSSIBILITY OF PARTICLEBOARD PRODUCTION FROM HALOXYLON SP. AND WHEAT STRAW [Volume 17, 17-No. 300, 2002-2003, Pages 27-56]
WHEAT STRAW
INVESTIGATION OF PROPERTIES OF ETHANOL-ALKALI, KRAFT AND SODA PULPS PREPARED FROM WHEAT STRAW [Volume 21, No., 2, 2006-2007, Pages 105-114]
Wheat straw particle board
Improving the mechanical and physical of wheat straw particleboard using polypropylene powder [Volume 29, Fall 3, 2014-2015, Pages 464-473]
White cement
Improvement of dimensional stability and mechanical properties of gypsum particleboard by adding white cement [Volume 30, SPRING 1, 2015-2016, Pages 132-143]
White liner
Comparison of separate and combined effect of nanosilica and cationic additives on the optical properties of the white packaging liner [Volume 38, Issue 4, 2023-2024, Pages 266-280]
Whitening
Modification of yellowing caused by oxidation of paper cellulose using Sodium borohydride and Sodium dithionite [Volume 38, Issue 4, 2023-2024, Pages 296-315]
White rot
Effects of the Combined Modification Process of Glutaraldehyde/ paraffin on Biological and Mechanical properties of Poplar wood [Volume 31, Issue 4, 2016-2017, Pages 606-620]
White rot
The effect of treatment duration with Trichoderma harzianum fungus on the biopreservation efficacy of beech wood against white rot [Volume 38, Issue 3, 2023-2024, Pages 181-204]
White-rot fungus
The influence of fiber chemical treatment on prevention of biologic
deterioration of medium density fiberboard (MDF) [Volume 29, Fall 3, 2014-2015, Pages 390-398]
White-rot fungus
Investigation on the effect of acetylation and the resin type on the biological resistance of aspen tree layered particleboard [Volume 26, Issue 3, 2011-2012, Pages 466-476]
Withdrawal resistance
Investigation of withdrawal resistance of reinforced T-shaped joint with fiber reinforced composites [Volume 35, Issue 3, 2020-2021, Pages 294-305]
Withdrawal strength capacity
Investigation on withdrawal capacity of staple in the upholstered furniture frame made of LVL [Volume 32, Issue 2, 2017-2018, Pages 171-180]
WOOD ACIDITY
THE EFFECT OF HEAT ON WOOD ACIDITY IN PARTICLEBOARD PROCESS [Volume 18, No. 1, 2003-2004, Pages 39-62]
WOOD ANATOMY
Wood anatomy of an Iranian mangrove plant Avicennia marina (Forsk) Vierth [Volume 29, WINTER 4, 2014-2015, Pages 561-571]
WOOD ANATOMY
Inter-relations between tree-ring width and vessel features in black alder (Alnus glutinosa) [Volume 30, Summer 2, 2015-2016, Pages 278-288]
WOOD ANATOMY
Stem and root comparative wood anatomy of (Calligonum comosum)
In the deserts of Iran and short sight to technical properties of fabricated of particleboard from its wood [Volume 30, WINTER 4, 2015-2016, Pages 538-551]
WOOD ANATOMY
Position and role of tension wood in trees - Case study: Eucalypts [Volume 31, Summer 2, 2016-2017, Pages 237-247]
WOOD ANATOMY
Anatomical, physical and chemical properties of
(Seidlitzia rosmarinus Bunge ex Boiss) wood in irano-torani region [Volume 27, Issue 2, 2012-2013, Pages 112-225]
WOOD ANATOMY
JUNIPERUS EXELSA L.: WOOD STRUCTURE AND PHYSICAL PROPERTIES IN IRANO-TORANI REGION [Volume 15, 15-No. 278, 2001-2002, Pages 20-31]
WOOD ANATOMY
COMPARATIVE INVESTIGATION ON THE ANATOMICAL, PHYSICAL AND CHEMICAL CHARACTERISTICS OF ZIZIPHUS LOTUS (L.) LAM. FROM TWO REGION IN IRAN [Volume 18, No. 1, 2003-2004, Pages 109-133]
Wood and Paper
Simulation of condensing unit of liquor in Mazandaran wood and paper industry [Volume 32, Issue 4, 2017-2018, Pages 565-575]
Wood based composites
Mechanical and physical properties of plywood bonded with Bio-based Soy-tannin adhesive [Volume 37, Issue 3, 2022-2023, Pages 251-260]
Wood cement
Investigation on properties of wood-cement panels based on
Agricultural residues [Volume 28, Issue 3, 2013-2014, Pages 583-896]
Wood cement board nanocomposite
Effects of using Cellulose Nanocrystal as wood cement
Composite admixture on strength of physical and
Mechanical poroperties of wood cement board [Volume 35, Issue 3, 2020-2021, Pages 271-282]
Wood-Cement Composite
Properties of cement made from agricultural waste [Volume 30, Fall 3, 2015-2016, Pages 457-465]
Wood cement composites
Effect of density and industrial wood particles to cement ratio on mechanical and physical properties of wood cement composites [Volume 35, Issue 4, 2020-2021, Pages 362-375]
Wood coating
The effect of nano wollastonite on the fire resistance and the adhesion properties of water based acrylic coating in wood surface [Volume 33, Issue 2, 2018-2019, Pages 166-178]
WOOD DURABILITY
RELATIONSHIP BETWEEN WOOD EXTRACTIVES AND WOOD DECAY [Volume 18, No. 2, 2003-2004, Pages 139-154]
Wooden dowel
Lateral holding strength of wooden dowel, screw and ready-to-assemble joints
(RTA joints) constructed of Medium Density Fiberboard (MDF) [Volume 24, Issue 2, 2009-2010, Pages 219-231]
Wooden dowel
Study of the effect of carbon nanofiber reinforced epoxy adhesive on the flexural moment capacity of corner joints in furniture [Volume 36, Issue 4, 2021-2022, Pages 305-316]
Wooden furniture
Study of the effective indices on imports of Wooden furniture in Iran [Volume 28, Summer 2, 2013-2014, Pages 205-223]
Wooden furniture
The effect of new product layout on customer satisfaction in wooden household furniture industries using structural equations model in Tehran province [Volume 31, Summer 2, 2016-2017, Pages 294-308]
Wooden furniture
The effect of corona treatment to improve the mechanical properties of nitrocellulose and polyurethane coatings used in wooden furniture [Volume 34, Issue 3, 2019-2020, Pages 326-336]
Wooden Furniture Industry
Prioritization of factors affecting sustainable supply chain management and performance in Iran wooden furniture industry
(Case study: companies producing home and office furniture) [Volume 38, Issue 1, 2023-2024, Pages 1-20]
Wooden joints
Investigation of withdrawal resistance of reinforced T-shaped joint with fiber reinforced composites [Volume 35, Issue 3, 2020-2021, Pages 294-305]
Wooden office furniture
The effect of marketing capabilities, innovation and learning ability of employees on the performance of wooden office furniture companies [(Articles in Press)]
WOODEN SLEEPER
INVESTIGATION ON DESIGN AND FABRICATION OF TWO HALF LAMINATED SLEEPERS IN COMPARION WITH CONVENTIONAL TYPE [Volume 12, 12-No. 251, 2000-2001, Pages 39-72]
Wooden structures
Study the basic building wooden structures to withstand the effects of weather and destructive biological agents Alborz research center [Volume 33, Issue 3, 2018-2019, Pages 402-416]
Wooden structures
Application of Delfi Method in Identification of Influential Factors on Risk Management Model for Wooden Structures [Volume 36, Issue 3, 2021-2022, Pages 194-204]
WOODEN VESSELS
FACTORS CAUSING ATTACK OF WOODEN VESSELS AND MARINE STRUCTURE IN COSTS OF IRAN [Volume 16, 16-No. 293, 2002-2003, Pages 59-72]
WOOD FIBER
THE COMPARATIVE OF EFFECTS OF CELLULOSIC MATERIALS IN DIFFERENT LEVELS OF MAPP IN WOOD FIBER- FLOUR/ POLYPROPYLENE COMPOSITES [Volume 19, No., 1, 2004-2005, Pages 49-68]
Wood fibers
Investigation on the feasibility of utilization wood and OCC fiber on the surface
layer of particleboard and their effects on surface hardness and roughness [Volume 25, Issue 1, 2010-2011, Pages 62-69]
Wood fibers
Evaluating Thermal Properties and Biodegradability of Nanocomposites based Polylactic Acid (PLA) / Wood Fibers- [Volume 36, Issue 3, 2021-2022, Pages 283-292]
Wood-flour
Investigating the use of wood-flour of hybrid populus (euphratica-alba) cultivar of “Mofid” in wood-plastic composite [Volume 36, Issue 3, 2021-2022, Pages 231-242]
WOOD FLOUR
Study of utilizing recycled polyvinyl chloride (PVC) in wood-plastic composite [Volume 28, SPRING 1, 2013-2014, Pages 35-47]
WOOD FLOUR
The influence of using waste PET on the mechanical and rheological
properties of wood flour filled PP composites [Volume 29, WINTER 4, 2014-2015, Pages 581-593]
WOOD FLOUR
Investigation on utilization The mechanical of Fish wastes (WF) in manufacturing of biodegradable wood plastic composites (WPCs) and high density polyethylene (HDPE) [Volume 30, Fall 3, 2015-2016, Pages 362-375]
WOOD FLOUR
Influence of paper mill sludge on the long term hygroscopic behavior
of flat pressed wood-plastic composites [Volume 27, Issue 1, 2012-2013, Pages 81-88]
WOOD FLOUR
A Study on water absorption and thickness swelling behavior
of wood flour/glass fiber hybrid composites [Volume 24, Issue 2, 2009-2010, Pages 315-321]
WOOD FLOUR
THE COMPARATIVE OF EFFECTS OF CELLULOSIC MATERIALS IN DIFFERENT LEVELS OF MAPP IN WOOD FIBER- FLOUR/ POLYPROPYLENE COMPOSITES [Volume 19, No., 1, 2004-2005, Pages 49-68]
WOOD FLOUR
Production wood plastic of polypropylene/ poplar wood flour and starch powder with improved mechanical and biodegradability properties [Volume 36, Issue 3, 2021-2022, Pages 182-193]
Wood furniture industry
Applying analytical hierarchy process in ranking of the effective indices on competitiveness of the wooden furniture industry in Iran [Volume 30, WINTER 4, 2015-2016, Pages 578-594]
Wood Industry Sub- Sector
Investigating the Impact of Monetary Policy on Value Added Growth in Iran's Industrial Sub-Sectors (Positive Mathematical Programming Approach) with Emphasis on Wood industry sub-sector [Volume 34, Issue 4, 2019-2020, Pages 520-534]
Wood modification
Evaluation of Applied Performance of Thermally-Modified Fir Wood by Retification Process [Volume 36, Issue 3, 2021-2022, Pages 205-217]
Wood particle
Application of Apple pruning on particleboard manufacturing [Volume 23, Issue 1, 2008-2009, Pages 63-73]
Wood-plastic composite
Study of utilizing recycled polyvinyl chloride (PVC) in wood-plastic composite [Volume 28, SPRING 1, 2013-2014, Pages 35-47]
Wood-plastic composite
Investigating the use of wood-flour of hybrid populus (euphratica-alba) cultivar of “Mofid” in wood-plastic composite [Volume 36, Issue 3, 2021-2022, Pages 231-242]
Wood Plastic Composite
An analysis of the combined effects of isocyanate HMDI and maleic anhydride
(MAPE) coupling agents on the mechanical properties of HDPE- wood flour composite [Volume 28, Summer 2, 2013-2014, Pages 290-300]
Wood Plastic Composite
Physico-mechanical and morphological properties
of nanocomposite made from Canola stalk [Volume 28, Issue 4, 2013-2014, Pages 742-754]
Wood Plastic Composite
The effect of Nano-wollastonite on bending properties and fire resistance characteristics of wood flour/polypropylene composite [Volume 31, Fall 3, 2016-2017, Pages 425-434]
Wood Plastic Composite
Investigation on effect of acetylation and antioxidant on weathering resistance of wood/HDPE composite [Volume 27, WINTER 4, 2012-2013, Pages 707-716]
Wood Plastic Composite
Effect of different polypropylene grades and coupling agent on the properties of Wood Plastic Composites [Volume 26, Issue 4, 2011-2012, Pages 757-784]
Wood Plastic Composite
Investigation on Wood Plastic Composite Resistance against Water, Fire and Fungal attack Compared to Untreated Maple and Elm [Volume 22, Issue 2, 2007-2008, Pages 81-98]
Wood Plastic Composite
Influence of filler modification on physical and mechanical properties of wood plastic composite [Volume 34, Issue 4, 2019-2020, Pages 435-447]
Wood plastic composites
The Investigation of Acetylation and Anti-Oxidant Effect on Weathering of wood
Plastic Composites By Means of FTIR and Color Metry (Color measurement) [Volume 25, Issue 1, 2010-2011, Pages 70-79]
Wood plastic composites
Study bhavior creep composites made mixes particle board and medium
density Fiber Board-Recycled from HDPE waste and effect water
fiber board absorption on Composites [Volume 24, Issue 2, 2009-2010, Pages 194-205]
Wood plastic composites
Flexural Properties of Wood-Plastic Composites Made From Lignocellulosic Fillers and Recycled High Density Polyethylene Manufactured Using a Dry Blend/Hot Press Method [Volume 22, Issue 2, 2007-2008, Pages 109-120]
WOOD-PLASTIC COMPOSITES
The Effect of Nano-Wollastonite on Physical and Mechanical Properties of Wood Plastic Composites Made With Sunflower Stem Waste and Alder [Volume 31, Issue 4, 2016-2017, Pages 684-694]
WOOD-PLASTIC COMPOSITES
MECHANICAL PROPERTIES OF WOOD-PLASTIC COMPOSITE MADE FROM PARTICLEBOARD AND MDF WASTES AND POLYETHYLENE (HDPE) WASTES [Volume 20, No., 2, 2005-2006, Pages 271-284]
WOOD-PLASTIC COMPOSITES
THE EFFECT OF PRODUCING METHOD ON THE MECHANICAL PROPERTIES OF WOOD PLASTIC COMPOSITES MADE FROM PARTICLEBOARD WASTE [Volume 21, No., 1, 2006-2007, Pages 33-42]
WOOD-PLASTIC PANELS
A STUDY ON THE LONG TERM WATER ABSORPTION AND THICKNESS SWELLING BEHAVIOR OF WOOD-PLASTIC COMPOSITE PANELS [Volume 20, No., 2, 2005-2006, Pages 255-270]
Wood /polyethylene composite
Improvement of the weathering resistance of wood /polyethylene composite using carbamate derivatives (IPBC) and Thiabendazole preservative materials [Volume 28, SPRING 1, 2013-2014, Pages 123-133]
Wood Polymer Composites
Investigating the mechanical properties of wood
flour/ polypropylene/ nanoclay composite [Volume 28, SPRING 1, 2013-2014, Pages 153-168]
Wood Polymer Composites
Investigation on The Effects of Nanoclay Particles on Mechanical
Properties of Wood Polymer Composites Made of High
Density Polyethylene-Wood Flour [Volume 25, Issue 1, 2010-2011, Pages 91-101]
Wood Polymer Composites
Effect of Gamma-Ray on the Physical, Mechanical, Morphological and, Biological durability Properties of WPC Composite [Volume 37, Issue 1, 2022-2023, Pages 86-98]
Wood-PP composite
A study on the protective effect of nano zinc oxide against weathering of wood-polypropylene composite [Volume 37, Issue 1, 2022-2023, Pages 17-27]
WOOD PROPERTIES
TECHNOLOGICAL CHARACTERISTICS OF SAXAUL WOOD IN IRAN (KERMAN PROVINCE) [Volume 18, No. 1, 2003-2004, Pages 89-108]
Wood pulp
The effect of dry- heat aging on properties of handmade papers reinforced with cellulose nanofibers treatment [Volume 36, Issue 4, 2021-2022, Pages 317-328]
Wood radiography
The use of X-ray method to study annual growth variation
of Pinus eldarica [Volume 28, Summer 2, 2013-2014, Pages 341-353]
Wood species
Heat treatment of wood in dry medium and investigation on its effect on surface wettability and adhesion strength of coating [Volume 31, Summer 2, 2016-2017, Pages 362-373]
Writing and Printing Recycled Pulp Properties
Effect of Precipitated Calcium Carbonate and Soy Protein on Properties of Writing and Printing Recycled Pulp [Volume 33, Issue 3, 2018-2019, Pages 311-322]
WRV
The Effect of Chemical Pre-treatment of Industrial Waste of Licorice Root on its Pulp Structural Properties in Bio- Refinery Concept [Volume 32, Issue 4, 2017-2018, Pages 518-529]
X
X-ray
Assessment of decay in poplar and beech by using of x-ray non-destructive method [Volume 33, Issue 1, 2018-2019, Pages 112-121]
X-Ray Diffraction
Investigating the mechanical properties of wood
flour/ polypropylene/ nanoclay composite [Volume 28, SPRING 1, 2013-2014, Pages 153-168]
X-Ray Diffraction
Effect of nanoclay-particles on physical and mechanical properties of composites
made of almond shell powder-polypropylene [Volume 28, Issue 4, 2013-2014, Pages 654-671]
X-Ray Diffraction
Thermal properties and X-ray diffraction of wood plastic nanocomposite (effect of coupling agent and nanoclay content) [Volume 26, Issue 1, 2011-2012, Pages 151-160]
X-Ray Diffraction
Investigation on The Effects of Nanoclay Particles on Mechanical
Properties of Wood Polymer Composites Made of High
Density Polyethylene-Wood Flour [Volume 25, Issue 1, 2010-2011, Pages 91-101]
XRD
The utilization of two recycled polymers and bagasse fiber in wood
plastic nano / clay composites production [Volume 28, Issue 3, 2013-2014, Pages 435-450]
XRD
The effect of water vapor treatment of wood flour on physical and mechanical properties of hybrid composite made of poplar fiber and recycled polypropylene [Volume 32, Issue 3, 2017-2018, Pages 411-421]
Xylanase Enzyme
Effect of xylanase treatment on properties of alkaline peroxide mechanical
pulp from poplar (Populus nigra) wood [Volume 27, Issue 1, 2012-2013, Pages 156-166]
Xylanase Enzyme
Effects of xylanase on optical properties of bagasse kraft pulp in
ECF bleaching [Volume 24, Issue 2, 2009-2010, Pages 295-306]
XYLOPHAGES
AN INVESTIGATION ON DAMAGE OF AEOLESTHES SARTA SOLSKY ON INDUSTRIAL TIMBER IN IRAN [Volume 17, 17-No. 300, 2002-2003, Pages 73-95]
XYLOPHAGOUS PEST
AN INTRODUCING TO IMPORTANT XYLOPHAGOUS PESTS (LONG HORN BEETLES) OF IRAN [Volume 20, No., 2, 2005-2006, Pages 207-236]
Y
Yew bark
Extraction and Identification of Chemical Composition within Acetone Extract of Taxus baccata L. Bark [Volume 33, Issue 1, 2018-2019, Pages 88-99]
YIELD AND KAPPA NUMBER
Investigation of lignification and paper making characteristics of populus deltoids col. 77.51 grown under 3 rotation [Volume 16, 16-No. 293, 2002-2003, Pages 1-28]
Z
Z)-
Identification of chemical compounds in hexane extractives of black
locust heartwood by GC/MS method [Volume 27, Issue 3, 2012-2013, Pages 461-470]
Zelkova
Effects of climate variables (temperature and precipitation) on annual growth
of Zelkova carpinifolia [Volume 27, Issue 1, 2012-2013, Pages 69-80]
Zelkova carpinifolia
Morphological and chemical components of Ulmus glabrar, Ulmus compestris, Zelkova carpinifolia, Celtis australis [Volume 25, Issue 2, 2010-2011, Pages 248-259]
Zelkova carpinifolia – Wood identification
Comparative wood anatomy of Wych Elm, English Elm,
Caucasian Elm and Hackberry [Volume 26, Issue 3, 2011-2012, Pages 564-578]
Zeolite
Comparison of filler type performance on paper properties in the presence of cationic rosin sizing agent [Volume 32, Issue 2, 2017-2018, Pages 215-226]
Zinc chloride precursor
Effect of zinc oxide nanoparticles synthesis precursor in hydrothermal method on structure and physical properties of poplar wood [Volume 30, Fall 3, 2015-2016, Pages 466-474]
Zinc oxide Nanoparticle
Investigation of mechanical and optical properties of papers coated with Polycaprolactone - Nanocrystalline cellulose - zinc oxide Nanoparticle [Volume 34, Issue 1, 2019-2020, Pages 27-38]
Zinc oxide nanoparticles
Effect of zinc oxide nanoparticles synthesis precursor in hydrothermal method on structure and physical properties of poplar wood [Volume 30, Fall 3, 2015-2016, Pages 466-474]
Zinc oxide nanoparticles
The effect of adding zinc oxide nanoparticles on color change and adhesion strength of polyurethane coating on wood surface [Volume 30, WINTER 4, 2015-2016, Pages 690-704]
Zinc oxide nanoparticles
Effect of insitu synthesis of zinc oxide nanoparticles on the mechanical and biological properties of a wood-polymer composite [Volume 31, Issue 4, 2016-2017, Pages 566-576]
ZIZIPHUS LOTUS(L.) LAM
COMPARATIVE INVESTIGATION ON THE ANATOMICAL, PHYSICAL AND CHEMICAL CHARACTERISTICS OF ZIZIPHUS LOTUS (L.) LAM. FROM TWO REGION IN IRAN [Volume 18, No. 1, 2003-2004, Pages 109-133]
ZIZIPHUS SPINA- CHRISTI (L.) WILD WOOD
COMPARATIVE INVESTIGATION ON THE ANATOMICAL, PHYSICAL AND CHEMICAL CHARACTERISTICS OF ZIZIPHUS SPINA - CHRISTI (L.) WILD FROM TWO REGION IN IRAN [Volume 18, No. 2, 2003-2004, Pages 155-184]
ZnO
The Effect of Utilizing ZnO Nanoparticles and Eggshell on Physical and Mechanical Properties of Wood -Plastic Composite Production [Volume 31, Summer 2, 2016-2017, Pages 323-335]